Unwrought aluminum:

Aluminum, not alloyed:

Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

Other

Of greater than 99.8 percent aluminum

Other

Aluminum alloys:

Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

Other:

Containing 25 percent or more by weight of silicon

Other

Aluminum vanadium master alloy

Other:

Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils

Other, containing 0.03 percent or more by weight of lead (secondary aluminum)

Other:

Remelt scrap ingot

Sheet ingot (slab) of a kind described instatistical note 3 to this chapter

Foundry ingot of a kind described in statistical note 4 to this chapter

Other

Aluminum waste and scrap

Recyclable beverage containers

Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips

Other recyclable aluminum

Other

Aluminum powders and flakes:

Powders of non-lamellar structure

Powders of lamellar structure; flakes

Aluminum bars, rods and profiles:

Of aluminum, not alloyed:

Profiles

Bars and rods:

Having a round cross section

Other

Of aluminum alloys:

Hollow profiles

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other

Other:

Other profiles

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other

Bars and rods:

Having a round cross section

High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other

Other

High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other

Aluminum wire:

Of aluminum, not alloyed:

Of which the maximum cross-sectional dimension exceeds 7 mm

Other

Of aluminum alloys:

Of which the maximum cross-sectional dimension exceeds 7 mm

Other

Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm:

Rectangular (including square):

Of aluminum, not alloyed:

Not clad

With a thickness of more than 6.3 mm

With a thickness of 6.3 mm or less

Clad

Of aluminum alloys:

Not clad

With a thickness of more than 6.3 mm:

High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other

With a thickness of 6.3 mm or less:

Aluminum can stock:

Body stock

Lid stock

Other:

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other

Clad

Other:

Of aluminum, not alloyed:

Not clad

With a thickness of more than 6.3 mm

With a thickness of 6.3 mm or less

Clad

With a thickness of more than 6.3 mm

With a thickness of 6.3 mm or less

Of aluminum alloys:

Not clad

With a thickness of more than 6.3 mm

With a thickness of 6.3 mm or less

Clad

With a thickness of more than 6.3 mm

With a thickness of 6.3 mm or less

Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm:

Not backed:

Rolled but not further worked:

Of a thickness not exceeding 0.15 mm:

Of a thickness not exceeding 0.01 mm

Of a thickness exceeding 0.01 mm

Boxed aluminum foil weighing not more than 11.3 kg

Other

Other

Aluminum can stock:

Body stock

Lid stock

Other

Other:

Etched capacitor foil

Other:

Cut to shape, of a thickness not exceeding 0.15 mm

Other

Backed:

Covered or decorated with a character, design, fancy effect or pattern

Other

Aluminum tubes and pipes:

Of aluminum, not alloyed

Seamless

Other

Of aluminum alloys

Seamless

Other

Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves)

Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures:

Doors, windows and their frames and thresholds for doors

Windows and their frames

Thresholds for doors

Other

Other

Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment

Architectural and ornamental work

Other:

Mobile homes

Other

Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment

Tanks

Other

Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:

Collapsible tubular containers

Other:

Of a capacity not exceeding 20 liters

Cans of a capacity not exceeding 355 ml

Cans of a capacity exceeding 355 ml but less than 3.8 liters

Other

Other

Aluminum containers for compressed or liquefied gas

Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated:

With steel core:

Not fitted with fittings and not made up into articles

Fitted with fittings or made up into articles

Other:

Not fitted with fittings and not made up into articles:

Electrical conductors

With a cross-sectional area less than 240 mm²

With a cross-sectional area greater than or equal to 240 mm²

Other

Fitted with fittings or made up into articles

Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum:

Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like:

Pot scourers and scouring or polishing pads, gloves and the like

Other:

Cooking and kitchen ware:

Enameled or glazed or containing nonstick interior finishes:

Cast

Bakeware (cookware not suitable for stove top use)

Other

Other

Bakeware (cookware not suitable for stove top use)

Other

Not enameled or glazed and not containing nonstick interior finishes:

Cast

Bakeware (cookware not suitable for stove top use)

Other

Other

Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness

Other cookware:

Bakeware (cookware not suitable for stove top use)

Other

Other

Other

Sanitary ware and parts thereof

Other articles of aluminum:

Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles:

Nails, tacks and staples

Rivets

Cotters and cotter pins

Other:

Having shanks, threads or holes over 6 mm in diameter

Threaded fasteners

Other

Other

Threaded fasteners

Other

Other:

Cloth, grill, netting and fencing, of aluminum wire

Other:

Luggage frames

Other

Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material

Ladders

Venetian blinds and parts thereof

Hangers and supports for pipes and tubes

Other:

Castings

Forgings

Other:

Articles of wire

Other ^[17]