• Subpart A [§ 192.1 - § 192.18] - Subpart A—General

• Subpart B [§ 192.51 - § 192.69] - Subpart B—Materials

• Subpart C [§ 192.101 - § 192.127] - Subpart C—Pipe Design

• Subpart D [§ 192.141 - § 192.205] - Subpart D—Design of Pipeline Components

• Subpart E [§ 192.221 - § 192.245] - Subpart E—Welding of Steel in Pipelines

• Subpart F [§ 192.271 - § 192.287] - Subpart F—Joining of Materials Other Than by Welding

• Subpart G [§ 192.301 - § 192.329] - Subpart G—General Construction Requirements for Transmission Lines and Mains

• Subpart H [§ 192.351 - § 192.385] - Subpart H—Customer Meters, Service Regulators, and Service Lines

• Subpart I [§ 192.451 - § 192.493] - Subpart I—Requirements for Corrosion Control

• Subpart J [§ 192.501 - § 192.517] - Subpart J—Test Requirements

• Subpart K [§ 192.551 - § 192.557] - Subpart K—Uprating

• Subpart L [§ 192.601 - § 192.636] - Subpart L—Operations

• Subpart M [§ 192.701 - § 192.756] - Subpart M—Maintenance

• Subpart N [§ 192.801 - § 192.809] - Subpart N—Qualification of Pipeline Personnel

• Subpart O [§ 192.901 - § 192.951] - Subpart O—Gas Transmission Pipeline Integrity Management

• Subpart P [§ 192.1001 - § 192.1015] -

• Subpart 0 -

• Appendix Appendix A - Appendix A to Part 192 [Reserved]

• Appendix Appendix B - Appendix B to Part 192—Qualification of Pipe and Components

• Appendix Appendix C - Appendix C to Part 192—Qualification of Welders for Low Stress Level Pipe

• Appendix Appendix D - Appendix D to Part 192—Criteria for Cathodic Protection and Determination of Measurements

• Appendix Appendix E - Appendix E to Part 192—Guidance on Determining High Consequence Areas and on Carrying out Requirements in the Integrity Management Rule

• Appendix Appendix F - Appendix F to Part 192—Criteria for Conducting Integrity Assessments Using Guided Wave Ultrasonic Testing (GWUT)

• Appendix Appendix G - Appendix G to Part 192—XXX