• § 178.301 - xxx

• § 178.318 - Specification MC 201; container for detonators and percussion caps.

• § 178.318-1 - Scope.

• § 178.318-2 - Container.

• § 178.318-3 - Marking.

• § 178.320 - General requirements applicable to all DOT specification cargo tank motor vehicles.

• § 178.337 - Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter.

• § 178.337-1 - General requirements.

• § 178.337-2 - Material.

• § 178.337-3 - Structural integrity.

• § 178.337-4 - Joints.

• § 178.337-5 - Bulkheads, baffles and ring stiffeners.

• § 178.337-6 - Closure for manhole.

• § 178.337-7 - Overturn protection.

• § 178.337-8 - Openings, inlets, and outlets.

• § 178.337-9 - Pressure relief devices, piping, valves, hoses, and fittings.

• § 178.337-10 - Accident damage protection.

• § 178.337-11 - Emergency discharge control.

• § 178.337-12 - [Reserved]

• § 178.337-13 - Supporting and anchoring.

• § 178.337-14 - Gauging devices.

• § 178.337-15 - Pumps and compressors.

• § 178.337-16 - Testing.

• § 178.337-17 - Marking.

• § 178.337-18 - Certification.

• § 178.338 - Specification MC-338; insulated cargo tank motor vehicle.

• § 178.338-1 - General requirements.

• § 178.338-2 - Material.

• § 178.338-3 - Structural integrity.

• § 178.338-4 - Joints.

• § 178.338-5 - Stiffening rings.

• § 178.338-6 - Manholes.

• § 178.338-7 - Openings.

• § 178.338-8 - Pressure relief devices, piping, valves, and fittings.

• § 178.338-9 - Holding time.

• § 178.338-10 - Accident damage protection.

• § 178.338-11 - Discharge control devices.

• § 178.338-12 - Shear section.

• § 178.338-13 - Supporting and anchoring.

• § 178.338-14 - Gauging devices.

• § 178.338-15 - Cleanliness.

• § 178.338-16 - Inspection and testing.

• § 178.338-17 - Pumps and compressors.

• § 178.338-18 - Marking.

• § 178.338-19 - Certification.

• §§ 178.340-178.343 - §[Reserved]

• § 178.345 - General design and construction requirements applicable to Specification DOT 406 (DOT 407 (and DOT 412 (cargo tank motor vehicles.

• § 178.345-1 - General requirements.

• § 178.345-2 - Material and material thickness.

• § 178.345-3 - Structural integrity.

• § 178.345-4 - Joints.

• § 178.345-5 - Manhole assemblies.

• § 178.345-6 - Supports and anchoring.

• § 178.345-7 - Circumferential reinforcements.

• § 178.345-8 - Accident damage protection.

• § 178.345-9 - Pumps, piping, hoses and connections.

• § 178.345-10 - Pressure relief.

• § 178.345-11 - Tank outlets.

• § 178.345-12 - Gauging devices.

• § 178.345-13 - Pressure and leakage tests.

• § 178.345-14 - Marking.

• § 178.345-15 - Certification.

• § 178.346 - Specification DOT 406; cargo tank motor vehicle.

• § 178.346-1 - General requirements.

• § 178.346-2 - Material and thickness of material.

• § 178.346-3 - Pressure relief.

• § 178.346-4 - Outlets.

• § 178.346-5 - Pressure and leakage tests.

• § 178.347 - Specification DOT 407; cargo tank motor vehicle.

• § 178.347-1 - General requirements.

• § 178.347-2 - Material and thickness of material.

• § 178.347-3 - Manhole assemblies.

• § 178.347-4 - Pressure relief.

• § 178.347-5 - Pressure and leakage test.

• § 178.348 - Specification DOT 412; cargo tank motor vehicle.

• § 178.348-1 - General requirements.

• § 178.348-2 - Material and thickness of material.

• § 178.348-3 - Pumps, piping, hoses and connections.

• § 178.348-4 - Pressure relief.

• § 178.348-5 - Pressure and leakage test.