As stated in § 63.6003, you must maintain minimum data to show continuous compliance with the emission limits for tire production affected sources according to the following table:
| For . . .
| You must maintain . . .
|
|---|
| 1. Sources complying with purchase compliance alternative in § 63.5985(a) that are meeting the HAP constituent emission limit (option 1) in Table 1 to this subpart | a. A list of each cement and solvent as purchased and the manufacturer or supplier of each.
b. A record of Method 311 (40 CFR part 60, appendix A), or approved alternative method, test results indicating the mass percent of each HAP for each cement and solvent as purchased.
|
| 2. Sources complying with the monthly average compliance alternative without using a control device according to § 63.5985(b) that are meeting emission limits in Table 1 to this subpart | a. A record of Method 311, or approved alternative method, test results, indicating the mass percent of each HAP for each cement and solvent, as purchased.
b. The mass of each cement and solvent used each monthly operating period.
c. The total mass of rubber used each monthly operating period (if complying with the production-based emission limit, option 2, in Table 1 to this subpart).
d. All data and calculations used to determine the monthly average mass percent for each HAP for each monthly operating period.
e. Monthly averages of emissions in the appropriate emission limit format.
|
| 3. Sources complying with the monthly average compliance alternative using a control device according to § 63.5985(c) that are meeting emission limits in Table 1 to this subpart | a. The same information as sources complying with the monthly average alternative without using a control device.
b. Records of operating parameter values for each operating parameter that applies to you. |