As stated in § 63.6006, you must show continuous compliance with the emission limits for tire cord production affected sources according to the following table:
For . . .
| For the following emission limit . . .
| You must demonstrate continuous compliance by . . .
|
---|
1. Sources complying with the monthly average compliance alternative without using an add-on control device according to § 63.5987(a) | In Table 2 to this subpart | a. Demonstrating that the monthly average HAP emissions for each monthly operating period do not exceed the emission limits in Table 2 to this subpart, option 1, determined according to the applicable procedures in § 63.5997(a) and (b)(1) and (2).
b. Demonstrating that the monthly average HAP emissions for each monthly operating period do not exceed the HAP constituent emission limits in Table 2 to this subpart, option 2, determined according to the applicable procedures in § 63.5997(a) and (c)(1) and (2).
|
2. Sources complying with the monthly average compliance alternative using an add-on control device according to § 63.5987(b) | In Table 2 to this subpart | a. Demonstrating that the monthly average HAP emissions for each monthly operating period do not exceed the emission limits in Table 2 to this subpart, option 1, determined according to the applicable procedures in § 63.5997(a), (b)(1) and (3) through (4), and (d) through (f).
b. Demonstrating that the monthly HAP emissions for each monthly operating period do not exceed the HAP constituent emission limits in Table 2 to this subpart, option 2, determined according to the applicable procedures in § 63.5997(c)(1) and (3) through (4), and (d) through (f). |