You must comply with the emission limits that apply to your affected source in the following table as required by § 63.3490(a) through (c).
If you apply surface coatings to metal cans or metal can parts in this subcategory ...
| Then for all coatings of this type ...
| You must meet the following organic HAP emission limit in kg HAP/liter solids (lbs HAP/gal solids):
a b
|
---|
1. One and two-piece draw and iron can body coating | a. Two-piece beverage cans—all coatings
b. Two-piece food cans—all coatings
c. One-piece aerosol cans—all coatings | 0.04 (0.31).
0.06 (0.50).
0.08 (0.65).
|
2. Sheetcoating | Sheetcoating | 0.02 (0.17).
|
3. Three-piece can assembly | a. Inside spray | 0.12 (1.03).
|
| b. Aseptic side seam stripes on food cans | 1.48 (12.37).
|
| c. Nonaseptic side seam stripes on food cans | 0.72 (5.96).
|
| d. Side seam stripes on general line nonfood cans | 1.18 (9.84).
|
| e. Side seam stripes on aerosol cans | 1.46 (12.14).
|
4. End coating | a. Aseptic end seal compounds | 0.06 (0.54).
|
| b. Nonaseptic end seal compounds | 0.00 (0.00).
|
| c. Repair spray coatings | 0.64 (5.34).
|