| Pesticide Chemical
| CAS Reg. No.
| Limits
|
|---|
| Acetal | 105-57-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| acetaldehyde ethyl cis-3-hexenyl acetal | 28069-74-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Acetanisole | 100-06-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Acetic acid | 64-19-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Acetic acid, octyl ester | 112-14-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Acetophenone | 98-86-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Adipic acid | 124-04-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| alcohols, C16-18, distn. residues | 68603-17-8
| |
| | 1190630-03-5
| |
| alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C16-18 alcs. manuf | 1430895-61-6
| |
| alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C20-22 alcs. manuf | 1430895-62-7
| |
| Alkylbenzene sulfonates (branched and linear) of chain lengths C10-C16, including benzenesulfonic acid, dodecyl and benzenesulfonic acid, dodecyl-, sodium salt | 27176-87-0
25155-30-0 | When ready for use, the end-use concentration is not to exceed 700 ppm
|
| Alkyl cylcohexylpropionate | 2705-87-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| α-Alkyl-ω-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six carbons | 9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-8; 25231-21-4; 251553-55-6; 26183-52-8; 26468-86-0; 26636-39-5; 26636-40-8; 27252-75-1; 27306-79-2; 31726-34-8; 32128-65-7; 34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60636-37-5; 60828-78-6; 61702-78-1; 61723-78-2; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2; 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 161133-70-6; 166736-08-9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7; 303176-75-2; 954108-36-2; 2222805-23-2; 2409830-33-5 | None
|
| C10-C18-Alkyl dimethyl amine oxides | 1643-20-5, 2571-88-2, 2605-79-0, 3332-27-2, 61788-90-7, 68955-55-5, 70592-80-2, 7128-91-8, 85408-48-6, and 85408-49-7 | When ready for use, the end-use concentration is not to exceed 1,350 ppm
|
| Allspice oil (Pimenta officinalis Lindl.) | 8006-77-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| allyl alpha-ionone | 79-78-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Aluminum sulfate | 10043-01-3 | When ready for use, the end-use concentration is not to exceed 50 ppm
|
| 2-propen-1-aminium, N,N-dimethyl-N-propenyl-, chloride, homopolymer | 26062-79-3 | When ready for use, the end-use concentration is not to exceed 0.6%
|
| Ammonium chloride | 12125-02-9 | When ready for use, the end-use concentration is not to exceed 48 ppm
|
| Amyl butyrate | 540-18-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Amyl formate | 638-49-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Amyl hexanoate | 540-07-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Amylopectin, acid-hydrolyzed, 1-oxtenylbutanedioate | 113894-85-2 | None
|
| Amylopectin, hydrogen 1-octadecenylbutanedioate | 125109-81-1 | None
|
| p-Anisyl acetate | 104-21-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Anisyl formate | 122-91-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Anisyl propionate | 7549-33-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Aspartic acid, N-(1,2-dicarboxyethyl)-, tetrasodium salt | 144538-83-0 | When ready for use, the end-use concentration is not to exceed 5000 ppm
|
| Balsam oil, Peru (Myroxylon pereirae Klotzsch) | 8007-00-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzaldehyde | 100-52-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzaldehyde, methyl- | 1334-78-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzene, 1,2-dimethoxy- | 91-16-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzene, 2-methoxy-4-methyl-1-(1-methylethyl)- | 1076-56-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzeneacetaldehyde | 122-78-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzoic acid | 65-85-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzoin gum, Sumatra | 9000-05-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzyl acetate | 140-11-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| benzyl alcohol | 100-51-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzyl benzoate | 120-51-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| benzyl butyrate | 103-37-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzyl cinnamate | 103-41-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzyl formate | 104-57-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| benzyl isobutyrate | 103-28-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| benzyl propionate | 122-63-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzyl salicylate | 118-58-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Benzyl trans-2-methyl-2-butenoate | 37526-88-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| benzaldehyde, 4-methoxy- | 123-11-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| benzenemethanol, alpha-methyl-, 1-acetate | 93-92-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| benzoic acid, ethyl ester | 93-89-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Bicyclo(2.2.1)heptan-2-ol, 1,3,3-trimethyl- | 1632-73-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Bicyclo(2.2.1)heptan-2-ol, 1,7,7-trimethyl-,propanoate, exo- | 2756-56-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Bicyclo[3.1.1]heptane, 6,6-dimethyl-2-methylene- | 127-91-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Bisabolene | 495-62-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione (CAS Reg. No. 123944-63-8) | 0.5% by weight | Dye, coloring agent
|
| Bois de rose oil | 8015-77-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Borneol | 507-70-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| endo-Bornyl acetate | 76-49-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Butanoic acid, 1,1-dimethyl-2-phenylethyl ester | 10094-34-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Butanoic acid, 3-methyl-, 2-methylpropyl ester | 589-59-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| butanoic acid, 3-oxo-, ethyl ester | 141-97-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-buten-1-one, 1-(2,6,6-trimethyl-1,3-cyclohexadien-1-yl)- | 23696-85-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-buten-2-one, 3-methyl-4-(2,6,6-trimethyl-2-cyclohexen-1-yl)- | 127-51-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Buten-2-one, 4-(2,6,6-trimethyl-1-cyclohexen-1-yl)- | 14901-07-6; 79-77-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Butryic acid | 107-92-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Butyl acetate | 123-86-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Butyl alcohol | 71-36-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Butyl butyrate | 109-21-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Butyl butyryllactate | 7492-70-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Butyl isovalerate | 109-19-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Butyl sulfide | 544-40-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Butyl 10-undecenoate | 109-42-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| n-Butyl benzoate | 136-60-7 | When ready for use, the end-use concentration is not to exceed 15,000 ppm
|
| n-Butyl 2-methylbutyrate | 15706-73-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| n-Butyl-3-hydroxybutyrate | 53605-94-0 | Solvent
|
| γ-Butyrolactone | 96-48-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cadinene | 29350-73-0; 523-47-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Calcium bisulfate | | When ready for use, the end-use concentration is not to exceed 2,000 ppm
|
| Calcium sulfate | 7778-18-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Camphene | 79-92-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cananga oil | 68606-83-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| δ-3-Carene | 13466-78-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Carvacrol | 499-75-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 4-Carvomenthenol | 562-74-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Carvyl acetate | 97-42-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| β-Caryophyllene | 87-44-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cassia bark oil | 8007-80-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Celery seed oil | 8015-90-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Chamomile flower, Roman, oil (Anthemis nobilis L.) | 8015-92-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cinnamic acid; trans-Cinnamic acid | 621-82-9; 140-10-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| cinnamic aldehyde | 104-55-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| cinnamic alcohol | 104-54-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cinnamon leaf oil | 84649-98-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cinnamyl acetate | 103-54-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cinnamyl benzoate | 5320-75-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cinnamyl cinnamate | 122-69-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cinnamyl formate | 104-65-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cinnamyl isobutyrate | 103-59-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cinnamyl propionate | 103-56-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citral | 5392-40-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citral dimethyl acetal | 7549-37-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citronellal | 106-23-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citronellol | 106-22-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citronelloxyacetaldehyde | 7492-67-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citronellyl acetate | 150-84-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citronellyl butyrate | 141-16-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citronellyl formate | 105-85-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citronellyl isobutyrate | 97-89-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citronellyl propionate | 141-14-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citronellyl tiglate | 24717-85-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Citrus, ext. | 94266-47-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Clary oil (Salvia sclarea L.) | 8016-63-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cloves (Eugenia spp.) | 84961-50-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cognac oil, green | 8016-21-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Copper sulfate pentahydrate | 7758-99-8 | When ready for use, the end-use concentration is not to exceed 80 ppm
|
| Coriander oil (Coriandrum sativum L.) | 8008-52-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cornmint oil | 68917-18-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cuminaldehyde | 122-03-2 | When ready
for use, the end-use concentration is not to exceed 100 ppm
|
| Currant buds black absolute (Ribes nigrum L.) | 68606-81-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cyclohexadiene, methyl- | 30640-46-1; 1888-90-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Cyclohexene, 1-methyl-4-(1-methylethylidene)- | 586-62-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1-Cyclohexylethanol | 1193-81-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Cyclohexylethyl acetate | 21722-83-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Cymene | 99-87-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| β-Damascone, (Z)- | 23726-92-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| δ-decalactone | 705-86-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| γ-decalactone | 706-14-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| ε-Decalactone | 5579-78-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Decanal | 112-31-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Decanoic acid | 334-48-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Decanoic acid, 4-hydroxy-4-methyl-γ-lactone | 7011-83-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1-Decanol | 112-30-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Decenal | 3913-71-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| (E)-4-Decenal | 65405-70-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 4-Decenal | 30390-50-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 9-Decenal | 39770-05-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Decyl acetate | 112-17-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| D-Glucopyranose, oligomeric, decyl octyl glycosides | 68515-73-1 | None
|
| 1,3-dibromo-5,5-dimethylhydantoin | 77-48-5 | None
|
| 1,1-diethoxy-3,7-dimethylocta-2,6-diene | 7492-66-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| diethyl malonate | 105-53-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Diethyl sebacate | 110-40-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Diethyl tartrate | 87-91-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| dihydro-beta-ionone | 17283-81-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| dihydrocarvyl acetate | 20777-49-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| m-Dimethoxybenzene | 151-10-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Dimethoxybenzene | 150-78-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2,6-Dimethoxyphenol | 91-10-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3,7-Dimethyl-1-octanol | 106-21-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2,2-Dimethyl-1,3-dioxolane-4-methanol | 100-79-8
| |
| 2,6-Dimethyl-4-heptanol | 108-82-7 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| 2,6-Dimethyl-5-heptanal | 106-72-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3,7-Dimethyl-1,3,6-octatriene | 13877-91-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3,7-Dimethyl-6-octenoic acid | 502-47-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Dimethylbenzylcarbinyl acetate | 151-05-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Dimethylcyclohex-3-ene-1-carbaldehyde | 27939-60-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| α,α-Dimethylphenethyl alcohol | 100-86-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p,α-Dimethylstyrene | 1195-32-0 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Di-n-butyl carbonate | 542-52-9 | When ready for use, the end-use concentration is not to exceed 15,000 ppm
|
| Dipropylene glycol | 25265-71-8 | None
|
| 1-docosanol | 661-19-8
| |
| γ-Dodecalactone | 2305-05-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| δ-Dodecalactone | 713-95-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Dodecanol, (2E)- | 20407-84-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Dodecenal | 4826-62-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1-eicosanol | 629-96-9
| |
| Ethanol | 64-17-5 | None
|
| Elemi oil (Canarium spp.) | 8023-89-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl acetate | 141-78-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl anthranilate | 87-25-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 4-Ethylbenzaldehyde | 4748-78-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl benzoylacetate | 94-02-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl butyrate | 105-54-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl cinnamate | 103-36-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl (2E,4Z)-2,4-decadienoate | 3025-30-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl decanoate | 110-38-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl formate | 109-94-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl heptanoate | 106-30-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl hexanoate | 123-66-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl 2-hexylacetoacetate | 29214-60-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl 3-hydroxybutyrate | 5405-41-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl isobutyrate | 97-62-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl isovalerate | 108-64-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl laurate | 106-33-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl levulinate | 539-88-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl 2-methyl-3-pentenoate | 1617-23-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl 2-methylbutyrate | 452-79-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl 2-methylpentanoate | 39255-32-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl nonanoate | 123-29-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl octanoate | 106-32-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl propionate | 105-37-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| ethyl salicylate | 118-61-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl tiglate | 5837-78-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| ethylene brassylate | 105-95-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt | 64-02-8 | None
|
| 4-Ethylguaiacol | 2785-89-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Ethylphenol | 123-07-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl phenylacetate | 101-97-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ethyl 3-phenylpropionate | 2021-28-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Eugenyl acetate | 93-28-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| FD&C Green No. 3 | CAS Reg. No. 2353-45-9 | None
|
| FD&C Red No. 40 | 25956-17-6 | When ready for use, the end-use concentration is not to exceed 20 ppm
|
| FD&C Yellow No. 5 | 1934-21-0 | When ready for use, the end-use concentration is not to exceed 1000 ppm
|
| α-Farnesene | 125037-13-0; 502-61-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Farnesol | 4602-84-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Farnesyl acetate | 29548-30-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Formyl-6,6-dimethylbicyclo(3.1.1)hept-2-ene | 564-94-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Galbanum oil (Ferula spp.) | 8023-91-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Geranic acid | 459-80-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Geraniol | 106-24-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| (E)-Geraniol | 106-24-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| (E)-Geraniol acetate | 105-87-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Geranyl benzoate | 94-48-4 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Geranyl butyrate | 106-29-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Geranyl formate | 105-86-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Geranyl isobutyrate | 2345-26-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Geranyl phenylacetate | 102-22-7 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Geranyl propionate | 105-90-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Geranyl tiglate | 7785-33-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| C1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster | 5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9 | When ready for use, the end-use concentration is not to exceed 500 ppm
|
| D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, | None
| |
| D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned) | None
| |
| D-glucurono-6-deoxy-L-manno-D-glucan, acetate, calcium magnesium potassium sodium salt (diutan gum) | (CAS No. 595585-15-2) | None
|
| glyceryl triacetate | 102-76-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Guaiacol | 90-05-1 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Guaiene | 88-84-6 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Helichrysum leaf oil (Helichrysum angustifolium) | 8023-95-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| γ-Heptalactone | 105-21-5 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Heptanal | 111-71-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Heptanoic acid | 111-14-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Heptanol | 543-49-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-hepten-4-one, 5-methyl- | 81925-81-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| trans-3-Heptenyl 2-methylpropanoate | 67801-45-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Heptyl acetate | 112-06-1 | When ready for use, the end-use concentration is not to exceed 100 ppm |
| Heptyl alcohol | 111-70-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| γ-Hexalactone | 695-06-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexanal | 66-25-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexanoic acid | 142-62-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| n-Hexanol | 111-27-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexadecanoic acid | 57-10-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexadecanoic acid, ethyl ester | 628-97-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| ω-6-Hexadecenlactone | 7779-50-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2,4-Hexadienyl isobutyrate | 16491-24-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1-Hexanol, 3,5,5-trimethyl- | 3452-97-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Hexenal, (2E)- | 6728-26-3 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| 2-Hexen-1-ol | 2305-21-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Hexen-1-ol, (3Z)- | 928-96-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| (E)-2-Hexen-1-yl acetate | 2497-18-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| (Z)-3-Hexenol | 928-96-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| (Z)-3-Hexenol acetate | 3681-71-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| cis-3-Hexenyl benzoate | 25152-85-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| cis-3-Hexenyl butyrate | 16491-36-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 5-(cis-3-Hexenyl)dihydro-5-methyl-2(3H)furanone | 70851-61-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| cis-3-Hexenyl hexanoate | 31501-11-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| cis-3-Hexenyl isobutyrate | 41519-23-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Hexenyl 2-methylbutanoate | 10094-41-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| cis-3-Hexenyl propionate | 33467-74-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| cis-3-Hexenyl tiglate | 67883-79-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Hexenyl formate | 9/5/2315 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexyl acetate | 142-92-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexyl benzoate | 6789-88-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexyl butyrate | 2639-63-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexyl hexanoate | 6378-65-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexyl isobutyrate | 2349-07-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexyl 2-methylbutanoate | 10032-15-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexyl octanoate | 1117-55-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hexyl propionate | 2445-76-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hydrogen peroxide | 7722-84-1 | When ready for use, the end-use concentration is not to exceed 91 ppm
|
| Hydroxycitronellal | 107-75-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hydroxycitronellal dimethyl acetal | 141-92-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hydroxycitronellol | 107-74-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione | 123944-63-8 | When ready for use, the end-use concentration is not to exceed 300 ppm
|
| Hydroxynonanoic acid, δ-lactone | 3301-94-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 4-(p-hydroxyphenyl)-2-butanone | 5471-51-2 | When ready for use, the end-use concentration is not to exceed 100 ppm |
| 5-hydroxyundecanoic acid lactone | 710-04-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Hypochlorous acid | 7790-92-3 | When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine.
|
| Hypochlorous acid, sodium salt | 7681-52-9 | When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
|
| Hyssop oil (Hyssopus officinalis L.) | 8006-83-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1H-Indole | 120-72-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Iodine | 7553-56-2 | When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
|
| α-Ionone | 127-41-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| γ-Ionone | 79-76-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| α-Irone | 79-69-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoamyl acetate | 123-92-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoamyl alcohol | 123-51-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoamyl benzoate | 94-46-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoamyl butyrate | 106-27-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoamyl cinnamate | 7779-65-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoamyl isovalerate | 659-70-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoamyl phenylacetate | 102-19-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoamyl propionate | 105-68-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoamyl salicylate | 87-20-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoborneol | 124-76-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isobornyl acetate | 125-12-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isobutyl acetate | 110-19-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isobutyl angelate | 7779-81-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isobutyl benzoate | 120-50-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isobutyl 2-butenoate | 589-66-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isobutyl butyrate | 539-90-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isobutyl cinnamate | 122-67-8 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Isobutyl isobutyrate | 97-85-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Isobutyl-2-methyl-1,3-dioxolane-4-methanol | 5660-53-7
| |
| Isobutyl phenylacetate | 102-13-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isobutyl salicylate | 87-19-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isobutyraldehyde | 78-84-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isobutyric acid | 79-31-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoeugenol | 97-54-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isoeugenyl acetate | 93-29-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| iso-Methyl-β-ionone | 79-89-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isopropyl acetate | 108-21-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Isopropylacetophenone | 645-13-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Isopropylbenzyl alcohol | 536-60-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isopropyl-3-hydroxybutyrate | 54074-94-1 | Solvent
|
| Isopropyl 2-methylbutyrate | 66576-71-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Isopropylphenol | 88-69-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Isopropyl phenylacetaldehyde | 4395-92-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isopulegol | 89-79-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Isovaleric acid | 503-74-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Jasmine lactone | 25524-95-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Jasmine oil (Jasminum grandiflorum L.) | 8022-96-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Juniper oil (Juniperus communis L.) | 8002-68-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Labdanum oil (Cistus spp.) | 8016-26-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Lactic acid | 50-21-5 | When ready for use, the end-use concentration is not to exceed 10,000 ppm in antimicrobial formulations applied to food-contact surfaces in public eating places
|
| laevo-Bornyl acetate | 5655-61-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Lauryl acetate | 112-66-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Lauric acid | 143-07-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Lauric aldehyde | 112-54-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Lauryl alcohol | 112-53-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Lavandin oil (Lavandula hybrida) | 8022-15-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Levulinic acid | 123-76-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| d-Limonene | 5989-27-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linalool | 78-70-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linalool acetate | 115-95-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linalyl acetate | 115-95-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linalyl benzoate | 126-64-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linalyl cinnamate | 78-37-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linalyl formate | 115-99-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linalyl hexanoate | 7779-23-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linalyl isobutyrate | 78-35-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linalyl isovalerate | 1118-27-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linalyl propionate | 144-39-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Linoleic acid, methyl ester | 112-63-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Lipase, triacylglycerol | 9001-62-1 | When ready for use, the end-use concentration is not to exceed 500 ppm
|
| Lovage oil (Levisticum officinale Koch) | 8016-31-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Mace oil (Myristica fragrans Houtt.) | 8007-12-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Magnesium oxide | 1309-48-4 | None
|
| Magnesium sulfate anhydrous | 7487-88-9 | When ready for use, the end-use concentration is not to exceed 4400 ppm
|
| Magnesium sulfate heptahydrate | 10034-99-8 | When ready for use, the end-use concentration is not to exceed 4400 ppm.
|
| Magnesium sulfate hexahydrate | 7830-18-1 | When ready for use, the end-use concentration is not to exceed 4400 ppm.
|
| Magnesium sulfate monohydrate | 14168-73-1 | When ready for use, the end-use concentration is not to exceed 4400 ppm.
|
| Magnesium sulfate pentahydrate | 5553-21-6 | When ready for use, the end-use concentration is not to exceed 4400 ppm.
|
| Magnesium sulfate tetrahydrate | 24378-31-2 | When ready for use, the end-use concentration is not to exceed 4400 ppm.
|
| Magnesium sulfate trihydrate | 15320-30-6 | When ready for use, the end-use concentration is not to exceed 4400 ppm.
|
| p-Mentha-1,8-dien-7-ol | 536-59-4 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| p-Mentha-1,8-dien-7-yl acetate | 15111-96-3 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Menthol | 15356-70-4; 89-78-1; 1490-04-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 4-Mercapto-4-methyl-2-pentanone | 19872-52-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methane sulfonic acid | 75-75-2 | When ready for use, the end use concentration is not to exceed 5,000 ppm
|
| 1H-3a,7-Methanoazulen-6-ol, octahydro-3,6,8,8-tetramethyl-,[3R-(3.α,3a.β,6.α,7.β,8aα)] | 77-53-2 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| 2-methoxy-4-propylphenol | 2785-87-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 4-Methoxy-2-methyl-2-butanethiol | 94087-83-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Methoxy-4-methylphenol | 93-51-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 4-(p-Methoxyphenyl)-2-butanone | 104-20-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Methoxy-4-vinylphenol | 7786-61-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methylene blue | 61-73-4 | When ready for use, the end-use concentration is not to exceed 0.4 ppm
|
| Methyl-α-ionone | 127-42-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 4′-methylacetophenone | 122-00-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl anthranilate | 134-20-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| alpha-methylbenzyl alcohol | 98-85-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| methyl benzoate | 93-58-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Methyl-2-butenyl acetate | 1191-16-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| alpha-methylcinnamaldehyde | 101-39-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| methyl cinnamate | 103-26-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Methylcrotonic acid | 541-47-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl 3,7-dimethyl-6-octenoate | 2270-60-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl heptine carbonate | 111-12-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl hexanoate | 106-70-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl linolenate | 301-00-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl 2-methylbutyrate | 868-57-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Methyl-3-(p-isopropylphenyl)propionaldehyde | 103-95-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl N-acetylanthranilate | 2719-08-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl anisate | 121-98-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl N-methylanthranilate | 85-91-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl 2-nonenoate | 111-79-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl 2-nonynoate | 111-80-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl 3-nonenoate | 13481-87-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Methyl-4-phenyl-2-butanol | 103-05-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Methylanisole | 104-93-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methylbenzyl acetate (mixed o,m,p) | 360676-70-1; 2216-45-7; 17373-93-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| α-Methylbenzyl propionate | 120-45-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Methyl-2-butenyl benzoate | 5205-11-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Methylindole | 83-34-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl-α-ionone | 127-42-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl-β-ionone | 127-43-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl o-methoxybenzoate | 606-45-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl 3-methylthiopropionate | 13532-18-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Methyloctanal | 7786-29-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl octanoate | 111-11-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Methylpent-2-en-1-oic acid | 3142-72-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| β-Methylphenethyl alcohol | 1123-85-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl phenylacetate | 101-41-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Methyl-4-phenyl-2-butyl acetate | 103-07-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl n-propyl ketone | 107-87-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| methyl salicylate | 119-36-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl sulfide | 75-18-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl tetradecanoate | 124-10-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Methyl-trans-2-butenoic acid | 80-59-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Methyl undec-10-enoate | 111-81-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Methylundecanal | 110-41-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Methyl-1,3-propanediol | 2163-42-0 | None
|
| Musk ambrette | 123-69-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Myristaldehyde | 124-25-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Myristic acid | 544-63-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Nerolidiol | 142-50-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Neroli bigarde oil (Citrus aurantium L.) | 8016-38-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Nerolidol (isomer unspecified) | 7212-44-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Neryl acetate | 141-12-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Neryl formate | 2142-94-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Nitric acid | 7697-37-2 | When ready for use, the end-use concentration is not to exceed 1,000 ppm
|
| Nona-2-trans-6-cis-dienal | 557-48-2 | When ready for use, the end-use concentration is not to exceed 100 ppm |
| 2,6-Nonadien-1-ol | 7786-44-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2,6-Nonadienal diethyl acetal | 67674-36-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1,3-Nonanediol acetate (mixed esters) | 1322-17-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| γ-Nonalactone | 104-61-0 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Nonanal | 124-19-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Nonanoic acid | 112-05-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 6-nonenal, (6Z)- | 2277-19-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Nonenal | 2463-53-8 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| cis-6-nonen-1-ol | 35854-86-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Nonyl acetate | 143-13-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Nonyl alcohol | 143-08-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles) | None | None
|
| Octadecanoic acid | 57-11-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Octadecanoic acid, calcium salt | 1592-23-0 | None
|
| 1-octadecanol | 112-92-5
| |
| 9-Octadecenoic acid (9Z)-, sulfonated, oxidized | 1315321-93-7 | When ready for use, the end-use concentration is not to exceed 250 ppm
|
| 9-Octadecenoic acid (9Z)-, sulfonated, oxidized, potassium salts | 1315321-94-8 | When ready for use, the end-use concentration is not to exceed 250 ppm
|
| 9-Octadecenoic acid (9Z)-, sulfonated, oxidized, sodium salts | 1315321-95-9 | When ready for use, the end-use concentration is not to exceed 250 ppm
|
| 2,6-Octadien-1-ol, 3,7-dimethyl-,(Z)- | 106-25-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| γ-Octalactone | 104-50-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| δ-Octalactone | 698-76-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Octanal | 124-13-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| octanal dimethyl acetal | 10022-28-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1-Octanesulfonic acid, sodium salt | 5324-84-5 | When ready for use, the end-use concentration is not to exceed 46 ppm
|
| Octanoic acid | 124-07-2 | When ready for use, the end-use concentration is not to exceed 52 ppm
|
| Octanoic acid | 124-07-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1-Octanol | 111-87-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2,5,7-Octatrien-1-ol, 2,6-dimethyl0, 1-acetate | 197098-61-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 5-Octen-1-ol, (5Z)- | 64275-73-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1-Octen-3-yl acetate | 2442-10-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oil of Bergamot | 8007-75-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oil of camphor | 8008-51-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oil of citronella | 8000-29-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oil of orange | 8008-57-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, clove | 8000-34-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, Fir | 8021-29-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, geranium | 8000-46-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, ginger | 8007-08-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, grapefruit | 8016-20-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, lavender | 8000-28-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, lemon, terpene-free | 68648-39-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oil of lemon | 8008-56-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oil of lemongrass | 8007-02-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, lime | 8008-26-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, mimosa | 8031-03-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, orange, sweet, terpene-free | 68606-94-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, palmarosa | 8014-19-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, peppermint | 8006-90-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, spruce | 8008-80-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oils, thyme | 8007-46-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oleic acid | 112-80-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oleic acid, ethyl ester | 111-62-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oleyl alcohol | 143-28-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Olibanum oil (Boswellia spp.) | 8016-36-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Orange flower water absolute | 8030-28-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Orris absolute (Iris pallida) | 8002-73-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ortho-benzyl-para-chlorophenol | 120-32-1 | When ready for use, the end-use concentration is not to exceed 2080 ppm
|
| Oxacycloheptadec-10-ene-2-one | 28645-51-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900 | 9003-11-6 | None
|
| Palmitic acid | 57-10-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Paraffin waxes and hydrocarbon waxes; carboxypolymethylene resin; and paraffin waxes and hydrocarbon, oxidized, lithium salts | 8002-74-2; 68153-22-0; 68649-48-9
| |
| ω-Pentadecalactone | 106-02-5 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| 1-pentanol | 71-41-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Pepper, black, oil (Piper nigrum L.) | 8006-82-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| peppermint (Mentha piperita) ext. | 84082-70-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Peroxyacetic acid | 79-21-0 | When ready for use, the end-use concentration is not to exceed 58 ppm
|
| Peroxyoctanoic acid | 33734-57-5 | When ready for use, the end-use concentration is not to exceed 52 ppm
|
| Petitgrain bigarade oil | 8014-17-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Petitgrain Paraguay oil | 8014-17-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| α-Phellandrene | 99-83-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| phenethyl acetate | 103-45-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenethyl butyrate | 103-52-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenethyl cinnamate | 103-53-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenethyl formate | 104-62-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenethyl hexanoate | 6290-37-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenethyl propionate | 122-70-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenethyl salicylate | 87-22-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenethyl tiglate | 55719-85-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenol, 2-methoxy-4-(2-propenyl)- | 97-53-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenol, 2,4,6-trimethyl- | 527-60-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| phenyl ethyl alcohol | 60-12-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| phenethyl isobutyrate | 103-48-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| phenethyl phenylacetate | 102-20-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| phenylacetaldehyde dimethyl acetal | 101-48-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenylacetaldehyde glyceryl acetal | 29895-73-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phenylacetic acid | 103-82-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-phenylethyl 2-methylbutyrate | 24817-51-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Phenylpropionaldehyde | 104-53-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Phenylpropionic acid | 501-52-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Phenylpropyl acetate | 122-72-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-Phenylpropyl cinnamate | 122-68-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3-phenyl-1-propanol | 122-97-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Phenylpropionaldehyde | 93-53-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-Phenylpropionaldehyde dimethyl acetal | 90-87-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Phosphonic acid, (1-hydroxyethylidene)bis- | 2809-21-4 | When ready for use, the end-use concentration is not to exceed 14 ppm
|
| Phosphoric acid | 7664-38-2
| |
| Phosphoric acid, trisodium salt | 7601-54-9 | When ready for use, the end-use concentration is not to exceed 5916 ppm
|
| Pine needle oil | 8000-26-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Pine scotch oil (Pinus sylvestris L.) | 8023-99-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| α-Pinene | 80-56-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Polyammonium bisulfate | 10043-02-4 | When ready for use, the end-use concentration is not to exceed 250 ppm
|
| Potassium 2-benzyl-4-chlorophenate | 35471-49-9 | When ready for use, the end-use concentration is not to exceed 2080 ppm
|
| Potassium bromide | 7758-02-3 | When ready for use, the end-use concentration is not to exceed 46 ppm total available halogen
|
| Potassium iodide | 7681-11-0 | When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
|
| 1,3-Propanediol | 504-63-2 | None
|
| propanoic acid, 2-methyl-, 4-formyl-2-methoxyphenyl ester | 20665-85-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Propanoic acid | 79-09-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Propenylguaethol | 94-86-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Propionic acid | 79-09-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Propyl phenethyl acetal | 7493-57-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Propylene glycol | 57-55-6 | None
|
| α-Propylphenethyl alcohol | 705-73-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| o-Propylphenol | 644-35-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Propylphenol | 645-56-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2,6-Pyridinedicarboxylic acid | 499-83-2 | When ready for use, the end-use concentration is not to exceed 2 ppm
|
| Pyruvic acid | 127-17-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Quaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides | 8001-54-5 | When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound
|
| Quaternary ammonium compounds: n-alkyl (C12-18) dimethyl benzyl ammonium chloride | 68424-85-1 | When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound
|
| Quaternary Ammonium Compounds: n-alkyl (C 12-14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384 | 85409-23-0 | When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound.
|
| Quaternary ammonium compounds n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384 | None | When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound
|
| Quaternary ammonium compounds, Di-n-Alkyl (C8-10) dimethyl ammonium chloride, average molecular weight (in amu) 332 to 361 | None | When ready for use, the end-use concentration of these specific in quaternary ammonium compounds is not to exceed 240 ppm of active quaternary ammonium compound; the end-use concentration of all quaternary chemicals in the solution is not to exceed 400 ppm of active quaternary compound
|
| Quaternary ammonium compounds, didecyl dimethyl ammonium carbonate/didecyl dimethyl ammonium bicarbonate | 148788-55-0/148812-654-1 | When ready for use, the end-use concentration of these specific ammonium compounds is not to exceed 400 ppm of active quaternary ammonium compound
|
| Rose absolute (Rosa spp.) | 8007-01-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Salicylaldehyde | 90-02-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Sandalwood yellow oil (Santalum album L.) | 8006-87-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Santalol | 11031-45-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| cis-α-Santalol | 115-71-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| cis-β-Santalol | 77-42-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Schinus molle oil (Schinus molle L.) | 68917-52-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Sclareol | 515-03-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Silver ions resulting from the use of electrolytically-generated silver ions stabilized in citric acid as silver dihydrogen citrate (does not include metallic silver) | 14701-21-4 | When ready for use, the end-use concentration of silver ions is not to exceed 50 ppm of active silver
|
| Sodium 2-benzyl-4-chlorophenate | 3184-65-4 | When ready for use, the end-use concentration is not to exceed 2080 ppm
|
| Sodium bisulfate | 7681-38-1 | When ready for use, the end-use concentration is not to exceed 2,000 ppm
|
| Sodium dioctyl sulfosuccinate | 577-11-7 | None
|
| Sodium lauroyl sarcosinate | 137-16-6 | When ready for use, the end-use concentration is not to exceed 10,000 ppm
|
| Sorbitan, mono-9-octadecenoate, poly(oxy-1,2-ethanediyl) derivs., (Z)- | 9005-65-6 | None
|
| Spike lavender oil (Lavandula spp.) | 8016-78-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Stearic acid. | 57-11-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Storax (Liquidambar spp.) | 8046-19-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Sulfuric acid | 7664-93-9 | Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils in antimicrobial formulations. Not to exceed 600 ppm
|
| Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) | 151-21-3 | When ready for use, the end-use concentration is not to exceed 350 ppm
|
| Tagetes oil (Tagetes erecta L.) | 8016-84-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Tall oil fatty acid (CAS Reg. No. 61790-12-3) | | Solvent/carrier
|
| Tangerine oil (Citrus reticulata blanco) | 8008-31-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Tartaric acid | 87-69-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| DL-Tartaric acid | 133-37-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| α-Terpinene | 99-86-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| γ-Terpinene | 99-85-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| α-Terpineol | 98-55-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Terpinyl acetate (isomer mixture) | 8007-35-0 | When ready for use, the end-use concentration is not to exceed 100 ppm |
| 1-tetradecanol | 112-72-1
| |
| α-Terpinyl propionate | 80-27-3 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Tetradecanoic acid, ethyl ester | 124-06-1 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Tetradecanoic acid, 1-methylethyl ester | 110-27-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Tetrahydrogeranial | 5988-91-0 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Tetrahydrolinalool | 78-69-3 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Thiogeraniol | 39067-80-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| thymol (8CA) | 89-83-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Thyme (Thymus Vulgaris) Oil | 84929-51-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Tolu, balsam, gum (Myroxylon spp.) | 9000-64-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Tolylacetaldehyde | 104-09-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Tolyl acetate | 140-39-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Tolyl isobutyrate | 103-93-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Tolyl 3-methylbutyrate | 55066-56-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Tolyl octanoate | 59558-23-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| p-Tolyl phenylacetate | 101-94-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2-(p-Tolyl)propionaldehyde | 99-72-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Trans-1,3,3,3-tetrafluoroprop-1-ene | 29118-24-9 | None
|
| 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt | 2893-78-9 | When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
|
| 2-Tridecanal | 7774-82-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| triethyl citrate | 77-93-0 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Triethylene glycol | 112-27-6 | None
|
| p-α,α-Trimethylbenzyl alcohol | 1197-01-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2,6,6-Trimethyl-1-cyclohexen-1-acetaldehyde | 472-66-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2,6,6-Trimethyl-1&2-cyclohexen-1-carboxaldehyde | 432-25-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1,3,3-trimethyl-2-norbornanyl acetate | 13851-11-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3,3,5-Trimethylcyclohexanol | 116-02-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| (Z)-β-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one; (2E)-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one | 35044-68-9; 23726-92-3; 23726-91-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2,3,6-Trimethylphenol | 2416-94-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 4,7,7-Trimethyl-6-thiabicyclo[3.2.1]octane | 68398-18-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
.
|
| delta-1-(2,6,6-trimethyl-3-cyclohexen-1-yl)-2-buten-1-one | 57378-68-4 | When ready for use, the end-use concentration is not to exceed 100 ppm |
| 3,5,5-Trimethylhexanal | 5435-64-3
| When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Turpentine, oil | 8006-64-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| γ-Undecalactone | 104-67-6 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Undecanal | 112-44-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 1-undecanol | 112-42-5 | Carrier/Adjuvant and Coating Agent/Binder.
|
| 1,3,5-Undecatriene | 16356-11-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 9-Undecenal | 143-14-6 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 10-Undecenal | 112-45-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 10-Undecenoic acid | 112-38-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 10-Undecenoic acid, ethyl ester | 692-86-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 10-undecen-1-yl acetate | 112-19-6 | When ready for use, the end-use concentration is not to exceed 100 ppm.
|
| Undecyl alcohol | 112-42-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Valencene | 4630-07-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Valeraldehyde | 110-62-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Valeric acid | 109-52-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| γ-Valerolactone | 108-29-2 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Vanilla (Vanilla spp.) | 8024-06-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Vanilla extract (Vanilla spp.) | 84650-63-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Vanilla tahitensis, ext. | 94167-14-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Vanillin | 121-33-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| veratraldehyde | 120-14-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Violet leaves absolute (Viola odorata L.) | 90147-36-7 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Waxes and waxy substances, rice bran, oxidized | 1883583-80-9 | None
|
| Wintergreen oil | 68917-75-9 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Xylenesulfonic acid, sodium salt | 1300-72-7 | When ready for use, the end-use concentration is not to exceed 500 ppm
|
| 2,5-Xylenol | 95-87-4 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 2,6-Xylenol | 576-26-1 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| 3,4-Xylenol | 95-65-8 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Ylang-ylang oils | 8006-81-3 | When ready for use, the end-use concentration is not to exceed 100 ppm
|
| Zingerone | 122-48-5 | When ready for use, the end-use concentration is not to exceed 100 ppm
|