Chapter Notes (mobile-friendly format)

Chapter Notes (PDF format)

Heading / Subheading Stat Suffix Article Description Unit of Quantity Rates of Duty
1-General 1-Special 2
I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
7201
Pig iron and spiegeleisen in pigs, blocks or other primary forms:
7201.10.0000
Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus
tFree$1.11/t
7201.20.0000
Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus
tFree$1.11/t
7201.50
Alloy pig iron; spiegeleisen:
7201.50.3000
Alloy pig iron
tFree$1.11/t
7201.50.6000
Spiegeleisen
tFree0.5%
7202
Ferroalloys:
Ferromanganese:
7202.11
Containing by weight more than 2 percent of carbon:
7202.11.1000
Containing by weight more than 2 percent but not more than 4 percent of carbon
kg1.4%Free(A, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)6.5%
7202.11.5000
Containing by weight more than 4 percent of carbon
kg1.5%Free (A+, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)10.5%
7202.19
Other:
7202.19.1000
Containing by weight not more than 1 percent of carbon
kg2.3%Free(A, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)22%
7202.19.5000
Containing by weight more than 1 percent but not more than 2 percent of carbon
kg1.4%Free(A, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)6.5%
Ferrosilicon:
7202.21
Containing by weight more than 55 percent of silicon:
Containing by weight more than 55 percent but not more than 80 percent of silicon:
7202.21.1000
Containing by weight more than 3 percent of calcium
kg1.1%Free(A*, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)11.5%
7202.21.5000
Other
kg1.5%Free(A*, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)11.5%
7202.21.7500
Containing by weight more than 80 percent but not more than 90 percent of silicon
kg1.9%Free (A+, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)9%
7202.21.9000
Containing by weight more than 90 percent of silicon
kg5.8%Free (A+, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)40%
7202.29.00
Other
Free4.4¢/kg on silicon content
7202.29.0010
Containing by weight over 2 percent of magnesium
kg
7202.29.0050
Other
kg
7202.30.0000
Ferrosilicon manganese
kg3.9%Free(A*, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)23%
Ferrochromium:
7202.41.0000
Containing by weight more than 4 percent of carbon
kg1.9%Free(A*, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)7.5%
7202.49
Other:
7202.49.1000
Containing by weight more than 3 percent of carbon
kg1.9%Free (A+, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)7.5%
7202.49.50
Other
3.1%Free(A, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)30%
7202.49.5010
Containing by weight more than 0.5 percent of carbon
kg
7202.49.5090
Other
kg
7202.50.0000
Ferrosilicon chromium
kg10%Free(A, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)25%
7202.60.0000
Ferronickel
kgFree6.6¢/kg
7202.70.0000
Ferromolybdenum
kg4.5%Free (A+, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)31.5%
7202.80.0000
Ferrotungsten and ferrosilicon tungsten
kg5.6%Free(A, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)35%
Other:
7202.91.0000
Ferrotitanium and ferrosilicon titanium
kg3.7%Free (A+, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)25%
7202.92.0000
Ferrovanadium
kg4.2%Free (A+, AU, BH, CA, CL, CO, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)25%
7202.93
Ferroniobium:
7202.93.4000
Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon
kg5%Free (A+, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)25%
7202.93.8000
Other
kg5%Free (A*, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)25%
7202.99
Other:
7202.99.1000
Ferrozirconium
kg4.2%Free(A*, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)25%
7202.99.2000
Calcium silicon
kg5%Free (A, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)25%
7202.99.80
Other
5%Free (A+, AU, BH, CA, CL, CO, D, E, IL, JO, KR, MA, MX, OM, P, PA, PE, SG)25%
7202.99.8020
Ferrophosphorus
kg
7202.99.8040
Other
kg
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms:
7203.10.0000
Ferrous products obtained by direct reduction of iron ore
tFree$2.21/t
7203.90.0000
Other
tFree$2.21/t
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel:
7204.10.0000
Waste and scrap of cast iron
tFree74¢/t
Waste and scrap of alloy steel:
7204.21.0000
Of stainless steel
tFree74¢/t
7204.29.0000
Other
tFree74¢/t
7204.30.0000
Waste and scrap of tinned iron or steel
tFreeFree
Other waste and scrap:
7204.41.00
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
Free74¢/t
7204.41.0020
No. 1 bundles
t
7204.41.0040
No. 2 bundles
t
7204.41.0060
Borings, shovelings and turnings
t
7204.41.0080
Other
t
7204.49.00
Other
Free74¢/t
7204.49.0020
No. 1 heavy melting
t
7204.49.0040
No. 2 heavy melting
t
Other:
7204.49.0060
Cut plate and structural
t
7204.49.0070
Shredded
t
7204.49.0080
Other
t
7204.50.0000
Remelting scrap ingots
tFree74¢/t
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel:
7205.10.0000
Granules [1]
kgFree3%
Powders:
7205.21.0000
Of alloy steel [1]
kgFree45%
7205.29.0000
Other [1]
tFree$2.21/t
II. IRON AND NONALLOY STEEL
7206
Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):
7206.10.0000
Ingots
kgFree20%
7206.90.0000
Other
kgFree20%
7207
Semifinished products of iron or nonalloy steel:
Containing by weight less than 0.25 percent of carbon:
7207.11.0000
Of rectangular (including square) cross section, the width measuring less than twice the thickness
kgFree20%
7207.12.00
Other, of rectangular (other than square) cross section
Free20%
7207.12.0010
Having a width measuring less than four times the thickness
kg
7207.12.0050
Having a width measuring at least four times the thickness
kg
7207.19.00
Other
Free20%
7207.19.0030
Of circular cross section
kg
7207.19.0090
Other
kg
7207.20.00
Containing by weight 0.25 percent or more of carbon
Free20%
Of rectangular (including square) cross section:
7207.20.0025
Having a width measuring less than four times the thickness
kg
7207.20.0045
Having a width measuring at least four times the thickness
kg
7207.20.0075
Of circular cross section
kg
7207.20.0090
Other
kg
7208
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
7208.10
In coils, not further worked than hot-rolled, with patterns in relief:
7208.10.1500
Pickled
kgFree0.4¢/kg + 20%
Other:
7208.10.3000
Of a thickness of 4.75 mm or more
kgFree20%
7208.10.6000
Of a thickness of less than 4.75 mm
kgFree20%
Other, in coils, not further worked than hot-rolled, pickled:
7208.25
Of a thickness of 4.75 mm or more:
7208.25.3000
Of high-strength steel
kgFree20%
7208.25.6000
Other
kgFree0.4¢/kg + 20%
7208.26.00
Of a thickness of 3 mm or more but less than 4.75 mm
Free0.4¢/kg + 20%
7208.26.0030
High-strength steel
kg
7208.26.0060
Other
kg
7208.27.00
Of a thickness of less than 3 mm
Free0.4¢/kg + 20%
7208.27.0030
High-strength steel
kg
7208.27.0060
Other
kg
Other, in coils, not further worked than hot-rolled:
7208.36.00
Of a thickness exceeding 10 mm
Free20%
7208.36.0030
High-strength steel
kg
7208.36.0060
Other
kg
7208.37.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
Free20%
7208.37.0030
High-strength steel
kg
7208.37.0060
Other
kg
7208.38.00
Of a thickness of 3 mm or more but less than 4.75 mm
Free20%
7208.38.0015
High-strength steel
kg
Other:
7208.38.0030
With untrimmed edges
kg
7208.38.0090
Other
kg
7208.39.00
Of a thickness of less than 3 mm
Free20%
7208.39.0015
High-strength steel
kg
Other:
7208.39.0030
With untrimmed edges
kg
7208.39.0090
Other
kg
7208.40
Not in coils, not further worked than hot-rolled, with patterns in relief:
7208.40.30
Of a thickness of 4.75 mm or more
Free20%
7208.40.3030
Of a thickness exceeding 10 mm
kg
7208.40.3060
Other
kg
7208.40.60
Of a thickness of less than 4.75 mm
Free20%
7208.40.6030
Of a thickness less than 3 mm
kg
7208.40.6060
Other
kg
Other, not in coils, not further worked than hot-rolled:
7208.51.00
Of a thickness exceeding 10 mm
Free20%
7208.51.0030
Universal mill plate
kg
Other:
7208.51.0045
Of high-strength steel
kg
7208.51.0060
Other
kg
7208.52.0000
Of a thickness of 4.75 mm or more but not exceeding 10 mm
kgFree20%
7208.53.0000
Of a thickness of 3 mm or more but less than 4.75 mm
kgFree20%
7208.54.0000
Of a thickness of less than 3 mm
kgFree20%
7208.90.0000
Other
kgFree20%
7209
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
In coils, not further worked than cold-rolled (cold-reduced):
7209.15.0000
Of a thickness of 3 mm or more
kgFree0.4¢/kg + 20%
7209.16.00
Of a thickness exceeding 1 mm but less than 3 mm
Free0.4¢/kg + 20%
Of high-strength steel:
7209.16.0030
Annealed
kg
7209.16.0060
Other
kg
Other:
7209.16.0070
Annealed
kg
7209.16.0091
Other
kg
7209.17.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
Free0.4¢/kg + 20%
Of high-strength steel:
7209.17.0030
Annealed
kg
7209.17.0060
Other
kg
Other:
7209.17.0070
Annealed
kg
7209.17.0091
Other
kg
7209.18
Of a thickness of less than 0.5 mm:
7209.18.15
Of high-strength steel
Free0.4¢/kg + 20%
7209.18.1530
Annealed
kg
7209.18.1560
Other
kg
Other:
7209.18.25
Of a thickness of less than 0.361 mm (blackplate)
Free20%
7209.18.2510
Of a kind for use in making aperture masks for cathode-ray tube video displays
kg
Other:
7209.18.2520
Annealed
kg
7209.18.2580
Other
kg
7209.18.60
Other
Free0.4¢/kg + 20%
7209.18.6020
Annealed
kg
7209.18.6090
Other
kg
Not in coils, not further worked than cold-rolled (cold-reduced):
7209.25.0000
Of a thickness of 3 mm or more
kgFree0.4¢/kg + 20%
7209.26.0000
Of a thickness exceeding 1 mm but less than 3 mm
kgFree0.4¢/kg + 20%
7209.27.0000
Of a thickness of 0.5 mm or more but not exceeding 1 mm
kgFree0.4¢/kg + 20%
7209.28.0000
Of a thickness of less than 0.5 mm
kgFree0.4¢/kg + 20%
7209.90.0000
Other
kgFree0.4¢/kg + 20%
7210
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated:
Plated or coated with tin:
7210.11.0000
Of a thickness of 0.5 mm or more
kgFree6%
7210.12.0000
Of a thickness of less than 0.5 mm
kgFree6%
7210.20.0000
Plated or coated with lead, including terne-plate
kgFree6%
7210.30.00
Electrolytically plated or coated with zinc
Free21.5%
7210.30.0030
Of high-strength steel
kg
7210.30.0060
Other
kg
Otherwise plated or coated with zinc:
7210.41.0000
Corrugated
kgFree21.5%
7210.49.00
Other
Free21.5%
7210.49.0030
Of high-strength steel
kg
Other:
7210.49.0091
Of a thickness of 0.4 mm or more
kg
7210.49.0095
Other
kg
7210.50.0000
Plated or coated with chromium oxides or with chromium and chromium oxides
kgFree45%
Plated or coated with aluminum:
7210.61.0000
Plated or coated with aluminum-zinc alloys
kgFree21.5%
7210.69.0000
Other
kgFree21.5%
7210.70
Painted, varnished or coated with plastics:
7210.70.3000
Not coated or plated with metal and not clad
kgFree0.4¢/kg + 20%
7210.70.60
Other
Free21.5%
Zinc coated or plated:
7210.70.6030
Electrolytically coated or plated
kg
7210.70.6060
Other
kg
7210.70.6090
Other
kg
7210.90
Other:
7210.90.1000
Clad
kgFree30%
Other:
7210.90.6000
Electrolytically coated or plated with base metal
kgFree45%
7210.90.9000
Other
kgFree21.5%
7211
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:
Not further worked than hot-rolled:
7211.13.0000
Universal mill plate
kgFree20%
7211.14.00
Other, of a thickness of 4.75 mm or more
Free20%
7211.14.0030
Of high-strength steel
kg
Other:
7211.14.0045
Not in coils
kg
7211.14.0090
Other
kg
7211.19
Other:
Of a width of less than 300 mm:
7211.19.1500
Of high-strength steel
kgFree25%
Other:
7211.19.2000
Of a thickness exceeding 1.25 mm
kgFree25%
7211.19.3000
Other
kgFree25%
Other:
7211.19.4500
Of high-strength steel
kgFree20%
Other:
7211.19.6000
Pickled
kgFree0.4¢/kg + 20%
7211.19.75
Other
Free20%
In coils:
7211.19.7530
With untrimmed edges
kg
7211.19.7560
Other
kg
7211.19.7590
Other
kg
Not further worked than cold-rolled (cold-reduced):
7211.23
Containing by weight less than 0.25 percent of carbon:
Of a width of less than 300 mm:
Of a thickness exceeding 1.25 mm:
7211.23.1500
Of high-strength steel
kgFree25%
7211.23.2000
Other
kgFree25%
7211.23.3000
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
kgFree25%
7211.23.4500
Of a thickness not exceeding 0.25 mm
kgFree25%
7211.23.60
Other
Free0.4¢/kg + 20%
7211.23.6030
Of a thickness exceeding 1.25 mm
kg
7211.23.6060
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
kg
7211.23.6090
Of a thickness not exceeding 0.25 mm:
kg
7211.29
Other:
Of a width of less than 300 mm:
7211.29.20
Of a thickness exceeding 0.25 mm
Free25%
7211.29.2030
Of a width less than 51 mm, in coils
kg
7211.29.2090
Other
kg
7211.29.4500
Other
kgFree25%
7211.29.60
Other
Free0.4¢/kg + 20%
7211.29.6030
Of a thickness exceeding 1.25 mm
kg
7211.29.6080
Other
kg
7211.90.0000
Other
kgFree20%
7212
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated:
7212.10.0000
Plated or coated with tin
kgFree6%
7212.20.0000
Electrolytically plated or coated with zinc
kgFree21.5%
7212.30
Otherwise plated or coated with zinc:
Of a width of less than 300 mm:
7212.30.10
Of a thickness exceeding 0.25 mm or more
Free25%
7212.30.1030
Of a width less than 51 mm, in coils
kg
7212.30.1090
Other
kg
7212.30.3000
Other
kgFree25%
7212.30.5000
Other
kgFree21.5%
7212.40
Painted, varnished or coated with plastics:
7212.40.1000
Of a width of less than 300 mm
kgFree25%
7212.40.5000
Other
kgFree0.4¢/kg + 20%
7212.50.0000
Otherwise plated or coated
kgFree21.5%
7212.60.0000
Clad
kgFree30%
7213
Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:
7213.10.0000
Concrete reinforcing bars and rods
kgFree20%
7213.20.00
Other, of free-cutting steel
Free5.5%
7213.20.0010
Containing by weight 0.1% or more of lead
kg
7213.20.0080
Other
kg
Other:
7213.91
Of circular cross section measuring less than 14 mm in diameter:
7213.91.30
Not tempered, not treated and not partly manufactured
Free5.5%
7213.91.3011
Tire cord-quality steel wire rod as defined in statistical note 4 of this chapter
kg
7213.91.3015
Of Cold Heading Quality (CHQ) steel, as defined in statistical note 5 to this chapter
kg
7213.91.3020
Of welding quality wire rods as defined in statistical note 6 to this chapter
kg
7213.91.3093
Other
kg
Other:
7213.91.4500
Containing by weight 0.6 percent or more of carbon
kgFree5.5%
7213.91.6000
Other
kgFree6%
7213.99.00
Other
Free5.5%
Of circular cross section:
7213.99.0030
With a diameter of 14 mm or more but less than 19 mm
kg
7213.99.0060
With a diameter of 19 mm or more
kg
7213.99.0090
Other
kg
7214
Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
7214.10.0000
Forged
kgFree20%
7214.20.0000
Concrete reinforcing bars and rods
kgFree20%
7214.30.00
Other, of free-cutting steel
Free20%
7214.30.0010
Containing by weight 0.1% or more of lead
kg
7214.30.0080
Other
kg
Other:
7214.91.00
Of rectangular (other than square) cross-section
Free20%
7214.91.0015
Containing by weight less than 0.25 percent of carbon
kg
7214.91.0060
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7214.91.0090
Containing by weight 0.6 percent or more of carbon
kg
7214.99.00
Other
Free20%
Rounds:
Containing by weight less than 0.25 percent of carbon:
7214.99.0016
With a diameter less than 76 mm
kg
7214.99.0020
Other
kg
7214.99.0030
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7214.99.0045
Containing by weight 0.6 percent or more of carbon
kg
Other:
7214.99.0060
Containing by weight less than 0.25 percent of carbon
kg
7214.99.0075
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7214.99.0090
Containing by weight 0.6 percent or more of carbon
kg
7215
Other bars and rods of iron or nonalloy steel:
7215.10.00
Of free-cutting steel, not further worked than cold-formed or cold-finished
Free0.3¢/kg + 20%
7215.10.0010
Containing by weight 0.1% or more of lead
kg
7215.10.0080
Other
kg
7215.50.00
Other, not further worked than cold-formed or cold-finished
Free0.3¢/kg + 20%
Containing by weight less than 0.25 percent of carbon:
7215.50.0016
With a diameter less than 76 mm
kg
7215.50.0018
With a diameter of 76 mm or more but not exceeding 228 mm
kg
7215.50.0020
With a diameter exceeding 228 mm
kg
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7215.50.0061
With a diameter less than 76 mm
kg
7215.50.0063
With a diameter of 76 mm or more but not exceeding 228 mm
kg
7215.50.0065
With a diameter exceeding 228 mm
kg
7215.50.0090
Containing by weight 0.6 percent or more of carbon
kg
7215.90
Other:
Plated or coated with metal:
7215.90.1000
Not cold-formed
kgFree0.4¢/kg + 20%
7215.90.3000
Cold-formed
kgFree0.3¢/kg + 20%
7215.90.5000
Other
kgFree0.3¢/kg + 20%
7216
Angles, shapes and sections of iron or nonalloy steel:
7216.10.00
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
Free2%
7216.10.0010
U sections
kg
7216.10.0050
Other
kg
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
7216.21.0000
L sections
kgFree2%
7216.22.0000
T sections
kgFree2%
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
7216.31.0000
U sections
kgFree2%
7216.32.0000
I sections (standard beams)
kgFree2%
7216.33.00
H sections
Free2%
7216.33.0030
Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm
kg
7216.33.0060
Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm
kg
7216.33.0090
Other
kg
7216.40.00
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
Free2%
7216.40.0010
L sections
kg
7216.40.0050
Other
kg
7216.50.0000
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
kgFree2%
Angles, shapes and sections, not further worked than cold-formed or cold-finished:
7216.61.0000
Obtained from flat-rolled products
kgFree20%
7216.69.0000
Other
kgFree20%
Other:
7216.91.00
Cold-formed or cold-finished from flat-rolled products
Free20%
7216.91.0010
Drilled, notched, punched or cambered
kg
7216.91.0090
Other
kg
7216.99.00
Other
Free20%
7216.99.0010
Drilled, notched, punched or cambered
kg
7216.99.0090
Other
kg
7217
Wire of iron or nonalloy steel:
7217.10
Not plated or coated, whether or not polished:
Containing by weight less than 0.25 percent of carbon:
Flat wire:
7217.10.1000
Of a thickness not exceeding 0.25 mm
kgFree25%
7217.10.2000
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
kgFree25%
7217.10.3000
Of a thickness exceeding 1.25 mm
kgFree25%
Round wire:
7217.10.40
With a diameter of less than 1.5 mm
Free25%
Heat treated:
7217.10.4040
In coils weighing not more than 2 kilograms
kg
7217.10.4045
Other
kg
7217.10.4090
Other
kg
7217.10.50
With a diameter of 1.5 mm or more
Free7%
7217.10.5030
Heat treated
kg
7217.10.5090
Other
kg
7217.10.6000
Other wire
kgFree25%
Other:
7217.10.7000
Flat wire
kgFree25%
7217.10.80
Round wire
Free25%
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7217.10.8010
Heat treated
kg
7217.10.8020
Other
kg
Containing by weight more than 0.6 percent of carbon:
Heat treated:
7217.10.8025
With a diameter of less than 1.0 mm
kg
7217.10.8030
With a diameter of 1.0 mm or more but less than 1.5 mm
kg
7217.10.8045
With a diameter of 1.5 mm or more
kg
Other:
7217.10.8060
With a diameter of less than 1.0 mm
kg
7217.10.8075
With a diameter of 1.0 mm or more but less than 1.5 mm
kg
7217.10.8090
With a diameter of 1.5 mm or more
kg
7217.10.9000
Other wire
kgFree25%
7217.20
Plated or coated with zinc:
7217.20.1500
Flat wire
kgFree26%
Round wire:
7217.20.3000
With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
kgFree7%
7217.20.45
Other
Free25%
With a diameter of less than 1.0 mm:
7217.20.4510
Containing by weight less than 0.25 percent of carbon
kg
7217.20.4520
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7217.20.4530
Containing by weight 0.6 percent or more of carbon
kg
With a diameter of 1.0 mm or more but less than 1.5 mm:
7217.20.4540
Containing by weight less than 0.25 percent of carbon
kg
7217.20.4550
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7217.20.4560
Containing by weight 0.6 percent or more of carbon
kg
With a diameter of 1.5 mm or more:
7217.20.4570
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7217.20.4580
Containing by weight 0.6 percent or more of carbon
kg
Other:
7217.20.6000
Containing by weight less than 0.25 percent of carbon
kgFree25%
7217.20.7500
Other
kgFree26%
7217.30
Plated or coated with other base metals:
7217.30.15
Flat wire
Free26%
7217.30.1530
Containing by weight 0.6 percent or more of carbon
kg
7217.30.1560
Other
kg
Round wire:
7217.30.3000
With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
kgFree7%
7217.30.45
Other
Free25%
7217.30.4504
Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding
kg
Other:
With a diameter of less than 1.0 mm:
7217.30.4511
Containing by weight less than 0.25 percent of carbon
kg
7217.30.4520
Containing by weight 0.25 percent or more but less than 0.6 percent or carbon
kg
7217.30.4530
Containing by weight 0.6 percent or more of carbon
kg
With a diameter of 1.0 mm or more but less than 1.5 mm:
7217.30.4541
Containing by weight less than 0.25 percent of carbon
kg
7217.30.4550
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7217.30.4560
Containing by weight 0.6 percent or more of carbon
kg
7217.30.4590
With a diameter of 1.5 mm or more
kg
Other:
7217.30.6000
Containing by weight less than 0.25 percent of carbon
kgFree25%
7217.30.7500
Other
kgFree26%
7217.90
Other:
7217.90.1000
Coated with plastics
kgFree2%
7217.90.50
Other
Free35%
7217.90.5030
Containing by weight less than 0.25 percent of carbon
kg
7217.90.5060
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
kg
7217.90.5090
Containing by weight 0.6 percent or more of carbon
kg
III. STAINLESS STEEL
7218
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
7218.10.0000
Ingots and other primary forms
kgFree29%
Other:
7218.91.00
Of rectangular (other than square) cross-section
Free29%
Having a width less than four times the thickness:
7218.91.0015
Having a cross-sectional area of less than 232 cm2
kg
7218.91.0030
Having a cross-sectional area of 232 cm2 or more
kg
7218.91.0060
Having a width at least four times the thickness
kg
7218.99.00
Other
Free29%
Of square cross section:
7218.99.0015
Having a cross-sectional area of less than 232 cm2
kg
7218.99.0030
Having a cross-sectional area of 232 cm2 or more
kg
Of circular cross section:
7218.99.0045
Having a cross-sectional area of less than 232 cm2
kg
7218.99.0060
Having a cross-sectional area of 232 cm2 or more
kg
7218.99.0090
Other
kg
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more:
Not further worked than hot-rolled, in coils:
7219.11.00
Of a thickness exceeding 10 mm
Free29%
7219.11.0030
Of a width not exceeding 1575 mm
kg
7219.11.0060
Of a width exceeding 1575 mm
kg
7219.12.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
Free29%
7219.12.0002
Not annealed or not pickled
kg
Other:
7219.12.0006
Of high-nickel alloy steel
kg
Other:
Of a width of 1370 mm or more:
Of a thickness exceeding 6.8 mm:
7219.12.0021
Of a width not exceeding 1575 mm
kg
7219.12.0026
Of a width exceeding 1575 mm
kg
Other:
7219.12.0051
Of a width not exceeding 1575 mm
kg
7219.12.0056
Of a width exceeding 1575 mm
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7219.12.0066
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.12.0071
Other
kg
7219.12.0081
Other
kg
7219.13.00
Of a thickness of 3 mm or more but less than 4.75 mm
Free29%
7219.13.0002
Not annealed or not pickled
kg
Other:
7219.13.0031
Of a width of 1370 mm or more
kg
Other:
Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7219.13.0051
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.13.0071
Other
kg
7219.13.0081
Other
kg
7219.14.00
Of a thickness of less than 3 mm
Free29%
7219.14.0030
Of a width of 1370 mm or more
kg
Other:
7219.14.0065
Of high-nickel alloy steel
kg
7219.14.0090
Other
kg
Not further worked than hot-rolled, not in coils:
7219.21.00
Of a thickness exceeding 10 mm
Free29%
7219.21.0005
Of high-nickel alloy steel
kg
Other:
7219.21.0020
Of a width not exceeding 1575 mm
kg
7219.21.0040
Of a width exceeding 1575 mm but not exceeding 1880 mm
kg
7219.21.0060
Of a width exceeding 1880 mm
kg
7219.22.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
Free29%
7219.22.0005
Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum:
7219.22.0015
Of a width not exceeding 1575 mm
kg
7219.22.0020
Of a width exceeding 1575 mm but not exceeding 1880 mm
kg
7219.22.0025
Of a width exceeding 1880 mm
kg
Other:
7219.22.0035
Of a width not exceeding 1575 mm
kg
7219.22.0040
Of a width exceeding 1575 mm but not exceeding 1880 mm
kg
7219.22.0045
Of a width exceeding 1880 mm
kg
Other:
7219.22.0070
Of a width not exceeding 1575 mm
kg
7219.22.0075
Of a width exceeding 1575 mm but not exceeding 1880 mm
kg
7219.22.0080
Of a width exceeding 1880 mm
kg
7219.23.00
Of a thickness of 3 mm or more but less than 4.75 mm
Free29%
7219.23.0030
Of a width of 1370 mm or more
kg
7219.23.0060
Other
kg
7219.24.00
Of a thickness of less than 3 mm
Free29%
7219.24.0030
Of a width of 1370 mm or more
kg
7219.24.0060
Other
kg
Not further worked than cold-rolled (cold-reduced):
7219.31.00
Of a thickness of 4.75 mm or more
Free29%
7219.31.0010
In coils
kg
7219.31.0050
Not in coils
kg
7219.32.00
Of a thickness of 3 mm or more but less than 4.75 mm
Free29%
In coils:
Of a width of 1370 mm or more:
7219.32.0005
Of high-nickel alloy steel
kg
Other:
7219.32.0020
Containing more than 0.5 percent by weight of nickel
kg
7219.32.0025
Other
kg
Other:
7219.32.0035
Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7219.32.0036
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.32.0038
Other
kg
Other:
7219.32.0042
Containing less than 15 percent by weight of chromium
kg
7219.32.0044
Other
kg
Not in coils:
7219.32.0045
Of a width of 1370 mm or more
kg
7219.32.0060
Other
kg
7219.33.00
Of a thickness exceeding 1 mm but less than 3 mm
Free29%
In coils:
Of a width of 1370 mm or more:
7219.33.0005
Of high-nickel alloy steel
kg
Other:
7219.33.0020
Containing more than 0.5 percent by weight of nickel
kg
7219.33.0025
Other
kg
Other:
7219.33.0035
Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7219.33.0036
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.33.0038
Other
kg
Other:
7219.33.0042
Containing less than 15 percent by weight of chromium
kg
7219.33.0044
Other
kg
Not in coils:
7219.33.0045
Of a width of 1370 mm or more
kg
Other:
7219.33.0070
Containing more than 0.5 percent but less than 24 percent by weight of nickel
kg
7219.33.0080
Other
kg
7219.34.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
Free29%
In coils:
7219.34.0005
Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7219.34.0020
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.34.0025
Other
kg
Other:
7219.34.0030
Containing less than 15 percent by weight of chromium
kg
7219.34.0035
Other
kg
7219.34.0050
Not in coils
kg
7219.35.00
Of a thickness of less than 0.5 mm
Free29%
In coils:
Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7219.35.0005
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.35.0015
Other
kg
Other:
7219.35.0030
Containing less than 15 percent by weight of chromium
kg
7219.35.0035
Other
kg
7219.35.0050
Not in coils
kg
7219.90.00
Other
Free29%
7219.90.0010
Of high-nickel alloy steel
kg
Other:
Containing more 0.5 percent by weight of nickel:
7219.90.0020
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7219.90.0025
Other
kg
Other:
7219.90.0060
Containing less than 15 percent by weight of chromium
kg
7219.90.0080
Other
kg
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm:
Not further worked than hot-rolled:
7220.11.0000
Of a thickness of 4.75 mm or more
kgFree29%
7220.12
Of a thickness of less than 4.75 mm:
7220.12.1000
Of a width of 300 mm or more
kgFree29%
7220.12.5000
Of a width of less than 300 mm
kgFree34%
7220.20
Not further worked than cold-rolled (cold-reduced):
7220.20.10
Of a width of 300 mm or more
Free29%
Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7220.20.1010
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7220.20.1015
Other
kg
Other:
7220.20.1060
Containing less than 15 percent by weight of chromium
kg
7220.20.1080
Other
kg
Of a width of less than 300 mm:
7220.20.60
Of a thickness exceeding 1.25 mm
Free34%
7220.20.6005
Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7220.20.6010
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7220.20.6015
Other
kg
Other:
7220.20.6060
Containing less than 15 percent by weight of chromium
kg
7220.20.6080
Other
kg
7220.20.70
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Free34%
7220.20.7005
Of high-nickel alloy steel
kg
Other:
Containing more than 0.5 percent by weight of nickel:
7220.20.7010
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7220.20.7015
Other
kg
Other:
7220.20.7060
Containing less than 15 percent by weight of chromium
kg
7220.20.7080
Other
kg
Of a thickness not exceeding 0.25 mm:
7220.20.8000
Razor blade steel
kgFree34%
7220.20.90
Other
Free34%
7220.20.9030
Containing more than 0.5 percent but less than 24 percent by weight of nickel
kg
7220.20.9060
Other
kg
7220.90.00
Other
Free46%
Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7220.90.0010
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
kg
7220.90.0015
Other
kg
Other:
7220.90.0060
Containing less than 15 percent by weight of chromium
kg
7220.90.0080
Other
kg
7221.00.00
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
Free11%
7221.00.0005
Of high-nickel alloy steel
kg
Other:
Of circular cross section:
With a diameter of less than 14 mm:
7221.00.0017
Containing less than 8 percent by weight of nickel
kg
7221.00.0018
Containing 8 percent or more but less than 24 percent by weight of nickel
kg
7221.00.0030
With a diameter of 14 mm or more but less than 19 mm
kg
7221.00.0045
With a diameter of 19 mm or more
kg
7221.00.0075
Other
kg
7222
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7222.11.00
Of circular cross-section
Free29%
7222.11.0001
Electroslag or vacuum arc remelted
kg
7222.11.0006
Of high-nickel alloy steel
kg
Other:
With a maximum cross-sectional dimension of less than 152.4 mm:
7222.11.0057
Containing less than 8 percent by weight of nickel
kg
7222.11.0059
Containing 8 percent or more but less than 24 percent by weight of nickel
kg
With a maximum cross-sectional dimension of 152.4 mm or more:
7222.11.0082
Containing less than 8 percent by weight of nickel
kg
7222.11.0084
Containing 8 percent or more but less than 24 percent by weight of nickel
kg
7222.19.00
Other
Free29%
7222.19.0001
Electroslag or vacuum arc remelted
kg
Other:
7222.19.0006
Of high-nickel alloy steel
kg
Other:
7222.19.0052
Containing less than 8 percent by weight of nickel
kg
7222.19.0054
Containing 8 percent or more but less than 24 percent by weight of nickel
kg
7222.20.00
Bars and rods, not further worked than cold-formed or cold-finished
Free29%
7222.20.0001
Electroslag or vacuum arc remelted
kg
7222.20.0006
Of high-nickel alloy steel
kg
Other:
Of a circular cross-section:
With a maximum circular cross-sectional dimension of less than 18 mm:
7222.20.0041
Containing less than 8 percent by weight of nickel
kg
7222.20.0043
Containing 8 percent or more but less than 24 percent by weight of nickel
kg
With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm:
7222.20.0062
Containing less than 8 percent by weight of nickel
kg
7222.20.0064
Containing 8 percent or more but less than 24 percent by weight of nickel
kg
With a maximum circular cross-sectional dimension of 152.4 mm or more:
7222.20.0067
Containing less than 8 percent by weight of nickel
kg
7222.20.0069
Containing 8 percent or more but less than 24 percent by weight of nickel
kg
Other:
7222.20.0071
Containing less than 8 percent by weight of nickel
kg
7222.20.0073
Containing 8 percent or more but less than 24 percent by weight of nickel
kg
7222.30.00
Other bars and rods
Free29%
7222.30.0001
Electroslag or vacuum arc remelted
kg
7222.30.0012
Of high-nickel alloy steel
kg
Other:
With a maximum cross-sectional dimension of less than 152.4 mm:
7222.30.0022
Containing less than 8 percent by weight of nickel
kg
7222.30.0024
Containing 8 percent or more but less than 24 percent by weight of nickel
kg
With a maximum cross-sectional dimension of 152.4 mm or more:
7222.30.0082
Containing less than 8 percent by weight of nickel
kg
7222.30.0084
Containing 8 percent or more but less than 24 percent by weight of nickel
kg
7222.40
Angles, shapes and sections:
7222.40.30
Hot-rolled, not drilled, not punched and not otherwise advanced
Free10%
With a maximum cross-sectional dimension of 80 mm or more:
7222.40.3025
Angles
kg
7222.40.3045
Other
kg
With a maximum cross-sectional dimension of less than 80 mm:
7222.40.3065
Angles
kg
7222.40.3085
Other
kg
7222.40.6000
Other
kgFree28%
7223.00
Wire of stainless steel:
7223.00.10
Round wire
Free34%
7223.00.1005
Spring round wire
kg
Other:
7223.00.1016
With a diameter of less than 0.25 mm
kg
7223.00.1031
With a diameter of 0.25 mm or more but less than 0.76 mm
kg
7223.00.1046
With a diameter of 0.76 mm or more but less than 1.52 mm
kg
7223.00.1061
With a diameter of 1.52 mm or more but less than 5.1 mm
kg
7223.00.1076
With a diameter of 5.1 mm or more
kg
7223.00.5000
Flat wire
kgFree34%
7223.00.9000
Other
kgFree34%
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NONALLOY STEEL
7224
Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
7224.10.00
Ingots and other primary forms
Free28%
7224.10.0005
Of high-nickel alloy steel
kg
Other:
7224.10.0045
Of tool steel
kg
7224.10.0075
Other
kg
7224.90.00
Other
Free28%
7224.90.0005
Of high-nickel alloy steel
kg
Other:
Of tool steel:
Of rectangular (including square) cross section:
7224.90.0015
Having a width less than four times the thickness
kg
7224.90.0025
Having a width at least four times the thickness
kg
7224.90.0035
Other
kg
Other:
Of rectangular (including square) cross section:
7224.90.0045
Having a width less than four times the thickness
kg
7224.90.0055
Having a width at least four times the thickness
kg
7224.90.0065
Of circular cross section
kg
7224.90.0075
Other
kg
7225
Flat-rolled products of other alloy steel, of a width of 600 mm or more:
Of silicon electrical steel:
7225.11.0000
Grain-oriented
kgFree28%
7225.19.0000
Other
kgFree28%
7225.30
Other, not further worked than hot-rolled, in coils:
Of a thickness of 4.75 mm or more:
7225.30.11
Of tool steel
Free29%
7225.30.1110
Of high-speed steel
kg
7225.30.1180
Other
kg
7225.30.30
Other
Free28%
7225.30.3005
Of high-nickel alloy steel
kg
7225.30.3050
Other
kg
Of a thickness of less than 4.75 mm:
7225.30.51
Of tool steel
Free29%
7225.30.5110
Of high-speed steel
kg
7225.30.5180
Other
kg
7225.30.7000
Other
kgFree28%
7225.40
Other, not further worked than hot-rolled, not in coils:
Of a thickness of 4.75 mm or more:
7225.40.11
Of tool steel
Free29%
7225.40.1110
Of high-speed steel
kg
7225.40.1180
Other
kg
7225.40.30
Other
Free28%
7225.40.3005
Of high-nickel alloy steel
kg
7225.40.3050
Other
kg
Of a thickness of less than 4.75 mm:
7225.40.51
Of tool steel
Free29%
7225.40.5110
Of high-speed steel
kg
7225.40.5130
Of ball-bearing steel
kg
7225.40.5160
Other
kg
7225.40.7000
Other
kgFree28%
7225.50
Other, not further worked than cold-rolled (cold-reduced):
7225.50.11
Of tool steel
Free29%
7225.50.1110
Of high-speed steel
kg
7225.50.1130
Of ball-bearing steel
kg
7225.50.1160
Other
kg
Other:
7225.50.6000
Of a thickness of 4.75 mm or more
kgFree28%
Of a thickness of less than 4.75 mm:
7225.50.7000
Heat-resisting steel
kgFree29%
7225.50.80
Other
Free28%
7225.50.8010
Of high-nickel alloy steel
kg
7225.50.8080
Other
kg
Other:
7225.91.0000
Electrolytically plated or coated with zinc
kgFree28%
7225.92.0000
Otherwise plated or coated with zinc
kgFree28%
7225.99.00
Other
Free28%
7225.99.0010
Of high-nickel alloy steel
kg
7225.99.0090
Other
kg
7226
Flat-rolled products of other alloy steel, of a width of less than 600 mm:
Of silicon electrical steel:
7226.11
Grain-oriented:
7226.11.1000
Of a width of 300 mm or more
kgFree28%
7226.11.90
Of a width of less than 300 mm
Free33%
7226.11.9030
Of thickness not exceeding 0.25 mm
kg
7226.11.9060
Other
kg
7226.19
Other:
7226.19.1000
Of a width of 300 mm or more
kgFree28%
7226.19.9000
Of a width of less than 300 mm
kgFree33%
7226.20.0000
Of high-speed steel
kgFree37%
Other:
7226.91
Not further worked than hot-rolled:
Of tool steel (other than high-speed steel):
7226.91.0500
Of chipper knife steel
kgFree34%
Other:
7226.91.15
Of a width of 300 mm or more
Free29%
7226.91.1530
Of ball-bearing steel
kg
7226.91.1560
Other
kg
7226.91.25
Of a width of less than 300 mm
Free34%
7226.91.2530
Of ball-bearing steel
kg
7226.91.2560
Other
kg
Other:
7226.91.5000
Of a thickness of 4.75 mm or more
kgFree28%
Of a thickness of less than 4.75 mm:
7226.91.7000
Of a width of 300 mm or more
kgFree28%
7226.91.8000
Of a width of less than 300 mm
kgFree33%
7226.92
Not further worked than cold-rolled (cold-reduced):
Of tool steel (other than high-speed steel):
7226.92.10
Of a width of 300 mm or more
Free0.4¢/kg + 29%
7226.92.1030
Of ball-bearing steel
kg
7226.92.1060
Other
kg
7226.92.30
Of a width of less than 300 mm
Free34%
7226.92.3030
Of ball-bearing steel
kg
7226.92.3060
Other
kg
Other:
7226.92.5000
Of a width of 300 mm or more
kgFree0.4¢/kg + 28%
Of a width of less than 300 mm:
7226.92.70
Of a thickness not exceeding 0.25 mm
Free33%
7226.92.7005
Of high-nickel alloy steel
kg
7226.92.7050
Other
kg
7226.92.80
Of a thickness exceeding 0.25 mm
Free33%
7226.92.8005
Of high-nickel alloy steel
kg
7226.92.8050
Other
kg
7226.99.01
Other
Free33%
7226.99.0110
Electrolytically plated or coated with zinc
kg
7226.99.0130
Otherwise plated or coated with zinc
kg
7226.99.0180
Other
kg
7227
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
7227.10.0000
Of high-speed steel
kgFree14%
7227.20.00
Of silico-manganese steel
Free10%
7227.20.0030
Of welding quality wire rods as defined in statistical note 6 to this chapter
kg
7227.20.0080
Other
kg
7227.90
Other:
Of tool steel (other than high-speed steel):
7227.90.10
Not tempered, not treated, and not partly manufactured
Free12%
7227.90.1030
Of ball-bearing steel
kg
7227.90.1060
Other
kg
7227.90.20
Other
Free11%
7227.90.2030
Of ball-bearing steel
kg
7227.90.2060
Other
kg
7227.90.60
Other
Free10%
7227.90.6005
Of high-nickel alloy steel
kg
7227.90.6010
Of Cold Heading Quality (CHQ) steel, as defined in statistical note 5 to this chapter
kg
7227.90.6020
Of welding quality wire rods as defined in statistical note 6 to this chapter
kg
Of a circular cross section:
7227.90.6030
With a diameter of less than 14 mm
kg
7227.90.6035
With a diameter of 14 mm or more but less than 19 mm
kg
7227.90.6040
With a diameter of 19 mm or more
kg
7227.90.6090
Other
kg
7228
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel:
7228.10.00
Bars and rods, of high-speed steel
Free32%
7228.10.0010
Not cold-formed
kg
Cold-formed:
7228.10.0030
With a maximum cross-sectional dimension of less than 18 mm
kg
7228.10.0060
With a maximum cross-sectional dimension of 18 mm or more
kg
7228.20
Bars and rods, of silico-manganese steel:
7228.20.1000
Not cold-formed
kgFree28%
7228.20.5000
Cold-formed
kgFree28%
Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7228.30
Of tool steel (other than high-speed steel):
7228.30.2000
Of ball-bearing steel
kgFree29%
7228.30.4000
Of chipper knife steel, not cold-formed
kgFree28%
7228.30.6000
Other
kgFree29%
7228.30.80
Other
Free28%
7228.30.8005
Of high-nickel alloy steel
kg
7228.30.8010
Concrete reinforcing bars and rods
kg
Other:
7228.30.8015
With a diameter of less than 76 mm
kg
7228.30.8040
With a diameter of 76 mm or more but not exceeding 228 mm
kg
7228.30.8070
With a diameter exceeding 228 mm
kg
7228.40.0000
Other bars and rods, not further worked than forged
kgFree28%
7228.50
Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.10
Of tool steel (other than high-speed steel)
Free29%
7228.50.1010
Of ball-bearing steel
kg
Other:
With a maximum cross-sectional dimension of less than 18 mm:
7228.50.1020
Of round or rectangular cross section with surfaces ground, milled or polished
kg
7228.50.1040
Other
kg
With a maximum cross-sectional dimension of 18 mm or more:
7228.50.1060
Of round or rectangular cross section with surfaces ground, milled or polished
kg
7228.50.1080
Other
kg
7228.50.50
Other
Free28%
7228.50.5005
Of high-nickel alloy steel
kg
Other:
7228.50.5015
With a diameter of less than 76 mm
kg
7228.50.5040
With a diameter of 76 mm or more but not exceeding 228 mm
kg
7228.50.5070
With a diameter exceeding 228 mm
kg
7228.60
Other bars and rods:
7228.60.10
Of tool steel (other than high-speed steel)
Free29%
7228.60.1030
Of ball-bearing steel
kg
7228.60.1060
Other
kg
Other:
7228.60.6000
Not cold-formed
kgFree28%
7228.60.8000
Cold-formed
kgFree28%
7228.70
Angles, shapes and sections:
7228.70.30
Hot-rolled, not drilled, not punched and not otherwise advanced
Free10%
7228.70.3010
U, I, H and T sections
kg
Other:
With a maximum cross-sectional dimension of 76 mm or more:
7228.70.3020
Angles
kg
7228.70.3041
Other
kg
With a maximum cross-sectional dimension of less than 76 mm:
7228.70.3060
Angles
kg
7228.70.3081
Other
kg
7228.70.6000
Other
kgFree28%
7228.80.0000
Hollow drill bars and rods
kgFree30%
7229
Wire of other alloy steel:
7229.20.00
Of silico-manganese steel
Free33%
Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding:
7229.20.0010
Plated or coated with copper
kg
7229.20.0015
Other
kg
7229.20.0090
Other
kg
7229.90
Other:
7229.90.0500
Of high-speed steel
kgFree37%
Other:
7229.90.1000
Flat wire
kgFree33%
7229.90.50
Round wire
Free33%
With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding:
7229.90.5006
Plated or coated with copper
kg
7229.90.5008
Other
kg
Other:
7229.90.5016
With a diameter of less than 1.0 mm
kg
7229.90.5031
With a diameter of 1.0 mm or more but less than 1.5 mm
kg
7229.90.5051
With a diameter of 1.5 mm or more
kg
7229.90.9000
Other wire
kgFree33%