VAL RR:IT:VA 545910 LPF
Ms. Julie White
Nordstrom, Inc.
A/P Import Office
P.O. Box 870
Seattle, WA 98111
RE: Inclusion of defective materials and scrap or waste as assists; Modification of HRL 544758; Section 402(h)(1)(A) of the TAA; 19 CFR 152.103(d)(1) and (e)(1)
Dear Ms. White:
This decision concerns Headquarters Ruling Letter (HRL) 544758,
issued February 21, 1992, wherein it was determined, in pertinent part,
that the value of defective fabric not physically incorporated into the
imported merchandise was not to be included in the transaction value of
the merchandise. We have reviewed this portion of the decision and the
proper appraisement is as follows. Pursuant to section 625, Tariff Act
of 1930 (19 U.S.C. 1625), as amended by section 623 of Title VI (Customs
Modernization) of the North American Free Trade Agreement Implementation
Act, Pub. L. 103-182, 107 Stat. 2057, 2186 (1993) (hereinafter section
625), notice of the proposed modification of HRL 544758 was published on
May 17, 1995, in the Customs Bulletin, Volume 29, Number 20.
FACTS:
Nordstrom, Inc., the importer, purchases fabric from a foreign
vendor and subsequently gives it to a foreign CMT vendor to be used in
the assembly of apparel. Nordstrom receives a cut scale along with the
commercial invoice from the CMT vendor. The cut scale indicates the
quality and value of the fabric used and also indicates the number of
pieces cut as compared to the number of pieces ultimately sent to
Nordstrom. It is our understanding that the discrepancy between pieces
cut and pieces sent is due to defective fabric that is stained, torn, or
incorrectly cut.
ISSUE:
Whether materials which are defective or scrapped may constitute
assists and, if so, in what manner they are to be valued and apportioned
to the imported merchandise.
LAW AND ANALYSIS:
The preferred method of appraising merchandise imported into the
United States is transaction value pursuant to section 402(b) of the
Tariff Act of 1930, as amended by the Trade Agreements Act of 1979
(TAA), codified at 19 U.S.C. 1401a. Section 402(b)(1) of the TAA
provides, in pertinent part, that the transaction value of imported
merchandise is the "price actually paid or payable for the merchandise
when sold for exportation to the United States" plus enumerated
statutory additions, including the value apportioned as appropriate of
any assist. 19 U.S.C. 1401a(b)(1).
The "price actually paid or payable" is defined in section
402(b)(4)(A) of the TAA as the "total payment (whether direct or
indirect, and exclusive of any costs, charges, or expenses incurred for
transportation, insurance, and related services incident to the
international shipment of the merchandise...) made, or to be made, for
the imported merchandise by the buyer to, or for the benefit of, the
seller."
Section 402(h)(1)(A) of the TAA provides, in pertinent part, as
follows:
The term 'assist' means any of the following if supplied
directly or indirectly, and free of charge or at reduced
cost, by the buyer of imported merchandise for use in connection with the production or the sale for export to
the United States of the merchandise:
(i) Materials, components, parts, and similar
items incorporated in the imported merchandise.
(ii) Tools, dies, molds, and similar items used
in the production of the imported merchandise.
(iii) Merchandise consumed in the production of
the imported merchandise.
(iv) Engineering, development, artwork, design
work, and plans and sketches that are undertaken
elsewhere than in the United States and are
necessary for the production of the imported
merchandise.
Furthermore, the TAA Statement of Administrative Action (SAA) and
section 152.103(d)(1), Customs Regulations (19 CFR 152.103(d)(1)), set
forth the manner in which assists are to be valued. In particular,
section 152.103(d)(1) states that:
If the assist consists of materials, components,
parts, or similar items incorporated in the
imported merchandise, or items consumed in the
production of the imported merchandise, acquired
by the buyer from an unrelated seller, the value
of the assist is the cost of its acquisition. If
the assist were produced by the buyer or a person
related to the buyer, its value would be the cost
of its production. In either case, the value of
the assist would include transportation costs to
the place of production.
Finally, the SAA and section 152.103(e)(1), Customs Regulations
(19 CFR 152.103(e)(1)), provide the manner in which the value of an
assist is to be apportioned to the imported merchandise:
The apportionment of the value of assists to imported merchandise will be made in a reasonable manner appropriate to the circumstances and in accordance
with generally accepted accounting principles. The method of apportionment actually accepted by Customs will depend upon the documentation submitted by the importer. If the entire anticipated production using the assist is for exportation to the United States,
the total value may be apportioned over (i) the first shipment, if the importer wishes to pay duty on the entire value at once, (ii) the numb er of units produced up to the time of the first shipment, or (iii) the entire anticipated production. In addition to these three methods, the importer may request some other method of apportionment in accordance with generally accepted accounting principles. If the anticipated production is only partially for exportation to the United States, or if the assist is used in several countries, the method of appraisement will depend upon the documentation submitted by the importer.
Based on the statutory and regulatory language cited above, it
remains Customs position that in regard to material or components which
may constitute assists, a three part analysis must be employed. First,
the material or components must fit the definition of an assist;
second, it must appropriately be valued as an assist; and third, the
value of the assist must be apportioned to the imported merchandise.
Upon review, it is our position that in situations where scrap or
waste results from, or during, the production process, limiting the
analysis only to consider whether the material or components were
physically incorporated into the completed imported merchandise is
inconsistent with the language provided in the TAA. Rather, we stress
that the TAA provides that material or components "use[d] in connection
with the production or the sale for export to the United States of the
merchandise" constitutes an assist not only when "incorporated in the
imported merchandise," but also when "consumed in the production of the
imported merchandise (emphasis added)." The fact that waste or scrap
(of a material such as a bolt of fabric) which results from, or during,
the production of the imported merchandise is not physically
incorporated in that merchandise does not negate the fact that such
material or components still may be consumed in the production of the
merchandise and constitute assists.
The definition of an assist is not inextricably tied to the value
or apportionment of an assist. Once it is determined that material or
components meet the definition of an assist, the inquiry then concerns
the cost of acquisition or production of that assist. Apportionment of
the value of the assist subsequently comes into consideration.
Accordingly, once it is determined that material or components
meet the definition of an assist in accordance with the above, then
Customs will consider, among other things, the accounting records of the
supplier of the assists to determine the value of the assist. Customs
would consider such information in cases including those where scrap or
waste results from, or during, the production of the imported
merchandise.
In the instant situation, Customs now considers material to have
been consumed in the production of the imported apparel in accordance
with section 402(h)(1)(A)(iii) of the TAA and, hence, to constitute an
assist if such material:
a. during the manufacture of the imported merchandise;
b. either falls to the factory floor (or otherwise is accumulated when the fabric is cut or worked), is found
to be defective or not up to quality, or is mishandled
and rendered disfunctional; and
c. subsequently is discarded, scrapped or otherwise destroyed.
On the other hand, material would not be deemed incorporated in, nor
consumed in the production of, the imported apparel and, therefore,
would not constitute an assist if such material either is found to be
defective or not up to quality, or is mishandled and rendered
disfunctional, and does not enter the manufacturing process of the
imported merchandise.
Valuation of the assist (including the material consumed in the
production of the apparel) and apportionment of that value to the
imported merchandise subsequently are considered. See 19 CFR
152.103(d)(1) and (e)(1). These latter determinations are to be based
on objective and quantifiable data including, among other things, the
accounting records of the supplier of the assists made in conformity
with generally accepted accounting principles.
HOLDING:
The defective or scrapped material at issue constitutes an assist
when, in accordance with the foregoing, it is consumed in the production
of the imported apparel pursuant to section 402(h)(1)(A)(iii) of the
TAA. Valuation of the assist and apportionment of that value to the
imported merchandise is to be based on objective and quantifiable data,
including, among other things, the accounting records of the supplier of
the assists made in conformity with generally accepted accounting
principles.
HRL 544758 is modified accordingly. In accordance with section
625, this ruling will become effective 60 days from its publication in
the Customs Bulletin. Interested parties who import merchandise
consistent with the facts set forth in this decision are encouraged to
contact the appropriate Customs field personnel to discuss the
processing of their specific entries and may submit requests for new
binding valuation rulings to the Value Branch, Office of Regulations and
Rulings.
Sincerely,
Acting Director,
International Trade Compliance Division