(a) Each control point must be capable of:
(1) Starting and discontinuing operation of the station;
(2) Changing frequencies within the same sub-band;
(3) [Reserved]
(4) In the case of stations operating in the 156-162 MHz bands, reducing power output to one watt or less in accordance with § 80.215(e).
1
1 Ship station transmitters, except hand-held portable transmitters, manufactured after January 21, 1987 must automatically reduce the carrier power to one watt or less when turned to the frequency 156.375 MHz or 156.650 MHz. All ship station tramsmitters, except hand-held portable transmitters, used after January 21, 1997, must automatically reduce power as described above. A manual override device must be provided which when held by the operator will permit full carrier power operation on channels 13 and 67. Hand-held portable transmitters must be capable of reducing power to one watt, but need not do so automatically.
(b)-(f) [Reserved]
(g)(1) Any telegraphy transmitter constructed since January 1, 1952, that operates in the band 405-525 kHz with an output power in excess of 250 watts must be capable of reducing the output power to 150 watts or less.
(2) The requirement of paragraph (g)(1) of this section does not apply when there is available in the same station a transmitter capable of operation on the international calling frequency 500 kHz and at least one working frequency within the band 405-525 kHz, capable of being energized by a source of power other than an emergency power source and not capable of an output in excess of 100 watts when operated on such frequencies.
[51 FR 31213, Sept. 2, 1986, as amended at 52 FR 35244, Sept. 18, 1987; 90 FR 57707, Dec. 12, 2025]