Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources. The mass of wastewater pollutants in aluminum forming process wastewater introduced into a POTW shall not exceed the values set forth below:
Subpart F
Core
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum drawn with emulsions or soaps
|
| Chromium | 0.205 | 0.084
|
| Cyanide | 0.135 | 0.056
|
| Zinc | 0.681 | 0.285
|
| TTO | 0.32 | |
| Oil and grease (alternate monitoring parameter) | 25 | 12 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum rod cast
|
| Chromium | 0.0009 | 0.0004
|
| Cyanide | 0.0006 | 0.0003
|
| Zinc | 0.0029 | 0.0012
|
| TTO | 0.0014 | |
| Oil and grease (alternate monitoring parameter) | 0.10 | 0.052 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum rod cast
|
| Chromium | 0.086 | 0.035
|
| Cyanide | 0.056 | 0.024
|
| Zinc | 0.283 | 0.119
|
| TTO | 0.134 | |
| Oil and grease (alternate monitoring parameter | 10 | 5.1 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthy average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum quenched
|
| Chromium | 0.896 | 0.367
|
| Cyanide | 0.591 | 0.245
|
| Zinc | 2.98 | 1.25
|
| TTO | 1.41 | |
| Oil and grease (alternate monitoring parameter) | 110 | 53 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthy average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.079 | 0.032
|
| Cyanide | 0.052 | 0.022
|
| Zinc | 0.262 | 0.11
|
| TTO | 0.124 | |
| Oil and grease (alternate monitoring parameter) | 9.3 | 4.7 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthy average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.612 | 0.251
|
| Cyanide | 0.404 | 0.167
|
| Zinc | 2.03 | 0.849
|
| TTO | 0.96 | |
| Oil and grease (alternate monitoring parameter) | 73 | 36 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthy average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.851 | 0.348
|
| Cyanide | 0.561 | 0.232
|
| Zinc | 2.82 | 1.18
|
| TTO | 1.33 | |
| Oil and grease (alternate monitoring parameter) | 100 | 50 |
authority: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”);
33 U.S.C. 1311,
1314,
c,
e,
and, 1316(b) and
c, 1317(b) and
c,
1318; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4
source: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.
cite as: 40 CFR 467.65