The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart.
| Pollutant or pollutant property
| NSPS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
|
|
|
|
|
|---|
| | mg/m
2 (pounds per 1 million ft
2) of area processed
|
| Chromium | 0.18 | (0.037) | 0.072 | (0.015)
|
| Cyanide | 0.095 | (0.020) | 0.038 | (0.008)
|
| Zinc | 0.49 | (0.10) | 0.20 | (0.041)
|
| Aluminum | 1.44 | (0.30) | 0.59 | (0.121)
|
| Oil and Grease | 4.75 | (0.98) | 4.75 | (0.98)
|
| TSS | 7.13 | (1.46) | 5.70 | (1.17)
|
| pH | (
1) | (
1) | (
1) | (
1)
|
authority: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”);
33 U.S.C. 1311,
1314,
c,
e,
and, 1316 (b) and
c, 1317 (b) and
c,
and; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217
source: 47 FR 54244, Dec. 1, 1982, unless otherwise noted.
cite as: 40 CFR 465.33