• § 1209.1 - Scope and application.

• § 1209.2 - Definitions and measurements.

• § 1209.3 - General requirements.

• § 1209.4 - Test procedures for determining settled density.

• § 1209.5 - Test procedures for corrosiveness.

• § 1209.6 - Test procedures for critical radiant flux.

• § 1209.7 - Test procedures for smoldering combustion.

• § 1209.8 - Procedure for calibration of radiation instrumentation.

• § 1209.9 - Labeling requirement.

• § 1209.10 - Certification and enforcement.

• § 1209.11 - Effective date.

• Appendix - Figure 1 to Subpart A of Part 1209—Partial Insulation Preparation Apparatus

• Appendix - Figure 2 to Subpart A of Part 1209—Cyclone Receiver Weldment

• Appendix - Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side Elevation

• Appendix - Figure 4 to Subpart A of Part 1209—Flooring Radiant Panel Tester Schematic Low Flux End, Elevation

• Appendix - Figure 5 to Subpart A of Part 1209—Zero Reference Point Related to Detecting Plane

• Appendix - Figure 6 to Subpart A of Part 1209—Dummy Specimen in Specimen Holder

• Appendix - Figure 7 to Subpart A of Part 1209—Specimen Tray

• Appendix - Figure 8 to Subpart A of Part 1209—Standard Radiant Heat Energy Flux Profile

• Appendix - Figure 9 to Subpart A of Part 1209—Flux Profile Data Log Format

• Appendix - Figure 10 to Subpart A of Part 1209—Insulation Radiant Panel Test Data Log Format