(a) Purpose and scope. This section sets forth the applicable State Implementation Plan (SIP) for Michigan under section 110 of the Clean Air Act, 42 U.S.C. 7401,and.

(b) Incorporation by reference. (1) Material listed in paragraphs (c), (d), and (e) of this section with an EPA approval date prior to May 1, 2016, was approved for incorporation by reference by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Material is incorporated as it exists on the date of the approval, and notice of any change in the material will be published in the Federal Register. Entries in paragraphs (c), (d), and (e) of this section with the EPA approval dates after May 1, 2016, will be incorporated by reference in the next update to the SIP compilation.

(2) EPA Region 5 certifies that the rules/regulations provided by the EPA in the SIP compilation at the addresses in paragraph (b)(3) of this section are an exact duplicate of the officially promulgated state rules/regulations which have been approved as part of the SIP as of May 1, 2016.

(3) Copies of the materials incorporated by reference may be inspected at the Environmental Protection Agency, Region 5, Air Programs Branch, 77 West Jackson Boulevard, Chicago, IL 60604, and the National Archives and Records Administration. For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.

(c) EPA approved regulations.

(d) EPA approved state source-specific requirements.

(e) EPA approved nonregulatory and quasi-regulatory provisions.

[71 FR 52469, Sept. 6, 2006] Editorial Notes:1. For Federal Register citations affecting § 52.1170, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.

2. At 84 FR 44544, Aug. 26, 2019, § 52.1170 was amended by revising the paragraph (c) table entries for R 336.1906, R 336.1910, R 336.1911, R 336.1915, R 336.1916, and R 336.1930; however, the amendment could not be incorporated because those entries do not exist.

The Michigan plan was evaluated on the basis of the following classifications:

[37 FR 10873, May 31, 1972, as amended at 39 FR 16346, May 8, 1974; 45 FR 29801, May 6, 1980]

With the exceptions set forth in this subpart, the Administrator approves Michigan's plan for the attainment and maintenance of the National Ambient Air Quality Standards under section 110 of the Clean Air Act. Furthermore, the Administrator finds the plan satisfies all requirements of Part D, Title I of the Clean Air Act as amended in 1977, except as noted below. In addition, continued satisfaction of the requirements of Part D for the ozone portion of the SIP depends on the adoption and submittal of RACT requirements by July 1, 1980 for the sources covered by CTGs between January 1978 and January 1979 and adoption and submittal by each subsequent January of additional RACT requirements for sources covered by CTGs issued by the previous January.

[45 FR 29801, May 6, 1980]

(a) Part D—Disapproval. The following specific revisions to the Michigan Plan are disapproved:

(1) Rule 336.1331, Table 31, Item C: Emission limits for Open Hearth Furnaces, Basic Oxygen Furnaces, Electric Arc Furnaces, Sintering Plants, Blast Furnaces, Heating and Reheating Furnaces.

(2) Rules 336.1371 (Fugitive dust control programs other than areas listed in table 36.), 336.1372 (Fugitive dust control programs; required activities; typical control methods.) and 336.1373 (Fugitive dust control programs; areas listed in table 36.) for control of industrial fugitive particulate emissions sources.

(b) Part D—Conditional Approval—The Michigan overall Plan for primary and secondary nonattainment areas is approved provided that the following conditions are satisfied:

(1) The State officially adopts final industrial fugitive regulations that represent RACT for traditional sources and submits these finally effective regulations to USEPA by January 31, 1981.

(2) The State adopts and submits regulations reflecting RACT for Basic Oxygen Furnaces, Electric Arc Furnaces, Sintering Plants, Blast Furnaces and Heating and Reheating Furnaces.

(3) Rule 336.1331, Table 31, Item C: Coke Oven Preheater Equipment Effective After July 1, 1979—The State clarifies the compliance test method to include measurement of the whole train.

(4) Rule 336.1349—The State submits consent orders containing enforceable increments insuring reasonable further progress for each source subject to Rules 336.1350 through 336.1357.

(5) Rule 336.1350—The State adopts and submits an acceptable inspection method for determining compliance with the rule.

(6) Rule 336.1352—The State adopts and submits the following clarifications to the rule: (a) The rule regulates emissions from the receiving car itself during the pushing operation; (b) in the phrase “eight consecutive trips,” “consecutive” is defined as “consecutively observed trips”; (c) the word “trips” is defined as “trips per battery” or “trips per system”; (d) the 40% opacity fugitive emissions limitation refers to an instantaneous reading and not an average; (e) the method of reading opacity is defined.

(7) Rule 336.1353—The State adopts and submits: (a) An acceptable test methodology for determining compliance with the rule; and (b) a clarification that the exception to the visible emission prohibition of 4% of standpipe emission points refers to “operating” ovens.

(8) Rule 336.1356—The State adopts and submits a clarification of the test methodology to determine compliance with the rule.

(9) Rule 336.1357—The State adopts and submits a clarification of the test methodology to determine compliance with the rule.

(10) The State adopts and submits a regulation reflecting RACT for coke battery combustion stacks.

(11) The State adopts and submits an acceptable test method for application of Rule 336.1331, Table 32 to quench towers, or, in the alternative, adopts and submits a limitation reflecting RACT for quench tower emissions based on the quantity of total dissolved solids in the quench water.

(12) The State adopts and submits rules requiring RACT for scarfing emissions.

(13) Part 10 Testing—The State adopts and submits the following clarifications to the test methods: (a) Testing of fugitive emissions from blast furnaces are conducted during the cast; (b) the starting and ending period is specified for basic oxygen furnaces (for both primary and secondary emissions generating operations), electric arc furnaces and for each of the three emission points at sinter plants.

(14) The State conducts additional particulate studies in the Detroit area by September, 1980.

(c) Disapprovals. EPA disapproves the following specific revisions to the Michigan Plan:

(1) The State submitted Consent Order No. 16-1982 on June 24, 1982, Great Lakes Steel, a Division of the National Steel Corporation as a revision to the Michigan State Implementation Plan. EPA disapproves this revision, because it does not satisfy all the requirements of EPA's proposed Emission Trading Policy Statement of April 7, 1982 (47 FR 15076).

(d) Approval—On April 29, 1988, the State of Michigan submitted a committal SIP for particulate matter with an aerodynamic diameter equal to or less than 10 micrometers (PM10) for Michigan's Group II areas. The Group II areas of concern are in the City of Monroe and an area surrounding the City of Carrollton. The committal SIP contains all the requirements identified in the July 1, 1987, promulgation of the SIP requirements for PM10 at 52 FR 24681.

(e) [Reserved]

(f) On July 24, 1995, the Michigan Department of Natural Resources requested the redesignation of Wayne County to attainment of the National Ambient Air Quality Standard for particulate matter. The State's maintenance plan is complete and the redesignation satisfies all of the requirements of the Act.

(g) Approval—On November 29, 1994, the Michigan Department of Natural Resources submitted a revision to the particulate State Implementation Plan for general conformity rules. The general conformity SIP revisions enable the State of Michigan to implement and enforce the Federal general conformity requirements in the nonattainment or maintenance areas at the State or local level in accordance with 40 CFR part 93, subpart B—Determining Conformity of General Federal Actions to State or Federal Implementation Plans.

(h) Determination of Attainment. EPA has determined, as of November 6, 2012, that based on 2009-2011 ambient air quality data, the Detroit-Ann Arbor nonattainment area has attained the 1997 annual PM2.5 NAAQS. This determination, in accordance with 40 CFR 51.1004(c), suspends the requirements for this area to submit an attainment demonstration, associated reasonably available control measures, a reasonable further progress plan, contingency measures, and other planning SIPs related to attainment of the standard for as long as this area continues to meet the 1997 annual PM2.5 NAAQS.

(i) Pursuant to Clean Air Act section 179(c), EPA has determined that the Detroit-Ann Arbor area attained the annual 1997 PM2.5 NAAQS by the applicable attainment date, April 5, 2010.

(j) Approval—The 1997 annual PM2.5 maintenance plans for the Detroit-Ann Arbor nonattainment area (Livingston, Macomb, Monroe, Oakland, St. Clair, Washtenaw, and Wayne Counties), has been approved as submitted on July 5, 2011. The maintenance plan establishes 2023 motor vehicle emissions budgets for the Detroit-Ann Arbor area of 4,360 tpy for primary PM2.5 and 119,194 tpy for NOX.

(k) Approval—The 2006 24-Hour PM2.5 maintenance plans for the Detroit-Ann Arbor nonattainment area (Livingston, Macomb, Monroe, Oakland, St. Clair, Washtenaw, and Wayne Counties), has been approved as submitted on July 5, 2011. The maintenance plan establishes 2023 motor vehicle emissions budgets for the Detroit-Ann Arbor area of 16 tpd for primary PM2.5 and 365 tpd for NOX.

(l) Approval—On October 3, 2016, the State of Michigan submitted a revision to their Particulate Matter State Implementation Plan. The submittal established transportation conformity “Conformity” criteria and procedures related to interagency consultation, and enforceability of certain transportation related control and mitigation measures.

[46 FR 27931, May 22, 1981, as amended at 49 FR 11834, Mar. 28, 1984; 50 FR 33540, Aug. 20, 1985; 55 FR 17752, Apr. 27, 1990; 61 FR 40519, Aug. 5, 1996; 61 FR 66609, Dec. 18, 1996; 77 FR 66547, Nov. 6, 2012; 78 FR 53274, Aug. 29, 2013; 82 FR 17135, Apr. 10, 2017]

(a) Part D—Conditional Approval—Michigan Rules 336.1603 and 336.1606 are approved provided that the following conditions are satisfied:

(1) Rule 336.1606—The State either promulgates a rule with a 120,000 gallon per year throughput exemption for gasoline dispensing facilities for sources located in Wayne, Macomb and Oakland Counties. The State must either submit the rule to USEPA or demonstrate that the allowable emissions resulting from the application of its existing rule with 250,000 gallon per year throughput exemption for gasoline dispensing facilities are less than five percent greater than the allowable emissions resulting from the application of the CTG presumptive norm. The State must comply with this condition by May 6, 1981, and any necessary regulations must be finally promulgated by the State and submitted to USEPA by September 30, 1981.

(b) Approval—On November 16, 1992, the Michigan Department of Natural Resources submitted Natural Resources Commission Rule 336.202 (Rule 2), Sections 5 and 14a of the 1965 Air Pollution Act 348, and the 1991 Michigan Air Pollution Reporting Forms, Reference Tables, and General Instructions as the States emission statement program. Natural Resources Commission Rule 336.202 (Rule 2) became effective November 11, 1986. Section 5 and 14a of the 1965 Air Pollution Act 348 became effective July 23, 1965. These rules have been incorporated by reference at 40 CFR 52.1170(c)(93). On October 25, 1993, the State submitted the 1993 Michigan Air Pollution Reporting Forms, Reference Tables, and General Instructions, along with an implementation strategy for the State's emission statement program.

(c)(1) Approval—On January 5, 1993, the Michigan Department of Natural Resources submitted a revision to the ozone State Implementation Plan (SIP) for the 1990 base year inventory. The inventory was submitted by the State of Michigan to satisfy Federal requirements under section 182(a)(1) of the Clean Air Act as amended in 1990 (the Act), as a revision to the ozone SIP for the Grand Rapids and Muskegon areas in Michigan designated nonattainment, classified as moderate. These areas include counties of Muskegon, and the two county Grand Rapids area (which are the counties of Kent and Ottawa).

(2) Approval—On November 12, 1993, the Michigan Department of Natural Resources submitted a petition for exemption from the oxides of nitrogen requirements of the Clean Air Act for the Detroit-Ann Arbor ozone nonattainment area. The submittal pertained to the exemption from the oxides of nitrogen requirements for conformity, inspection and maintenance, reasonably available control technology, and new source review. These are required by sections 176(c), 182(b)(4), and 182(f) of the 1990 amended Clean Air Act, respectively.

(d) In a letter addressed to David Kee, EPA, dated March 30, 1994, Dennis M. Drake, State of Michigan, stated:

(1) Michigan has not developed RACT regulations for the following industrial source categories, which have been addressed in Control Techniques Guidance (CTG) documents published prior to the Clean Air Act Amendments of 1990, because no affected sources are located in the moderate nonattainment counties:

(i) Large petroleum dry cleaners;

(ii) SOCMI air oxidation processes;

(iii) High-density polyethylene and polypropylene resin manufacturing; and

(iv) Pneumatic rubber tire manufacturing.

(2) (Reserved)

(e) Approval—On July 1, 1994, the Michigan Department of Natural Resources submitted a petition for exemption from the oxides of nitrogen requirements of the Clean Air Act for the East Lansing ozone nonattainment area. The submittal pertained to the exemption from the oxides of nitrogen requirements for conformity and new source review. Theses are required by sections 176(c) and 182(f) of the 1990 amended Clean Air Act, respectively. If a violation of the ozone standard occurs in the East Lansing ozone nonattainment area, the exemption shall no longer apply.

(f) Approval—On July 8, 1994, the Michigan Department of Natural Resources submitted a petition for exemption from the oxides of nitrogen requirements of the Clean Air Act for the Genesee County ozone nonattainment area. The submittal pertained to the exemption from the oxides of nitrogen requirements for conformity and new source review. These are required by sections 176(c) and 182(f) of the 1990 amended Clean Air Act, respectively. If a violation of the ozone standard occurs in the Genesee County ozone nonattainment area, the exemption shall no longer apply.

(g) [Reserved]

(h) Approval—On January 5, 1993, the Michigan Department of Natural Resources submitted a revision to the ozone State Implementation Plan for the 1990 base year emission inventory. The inventory was submitted by the State of Michigan to satisfy Federal requirements under section 182(a)(1) of the Clean Air Act as amended in 1990, as a revision to the ozone State Implementation Plan for the Detroit-Ann Arbor moderate ozone nonattainment area. This area includes Livingston, Macomb, Monroe, Oakland, St. Clair, Washtenaw, and Wayne counties.

(i) Approval—On November 12, 1993, the Michigan Department of Natural Resources submitted a request to redesignate the Detroit-Ann Arbor (consisting of Livingston, Macomb, Monroe, Oakland, St. Clair, Washtenaw, and Wayne counties) ozone nonattainment area to attainment for ozone. As part of the redesignation request, the State submitted a maintenance plan as required by 175A of the Clean Air Act, as amended in 1990. Elements of the section 175A maintenance plan include a base year (1993 attainment year) emission inventory for NOX and VOC, a demonstration of maintenance of the ozone NAAQS with projected emission inventories (including interim years) to the year 2005 for NOX and VOC, a plan to verify continued attainment, a contingency plan, and an obligation to submit a subsequent maintenance plan revision in 8 years as required by the Clean Air Act. If the area records a violation of the ozone NAAQS (which must be confirmed by the State), Michigan will implement one or more appropriate contingency measure(s) which are contained in the contingency plan. Appropriateness of a contingency measure will be determined by an urban airshed modeling analysis. The Governor or his designee will select the contingency measure(s) to be implemented based on the analysis and the MDNR's recommendation. The menu of contingency measures includes basic motor vehicle inspection and maintenance program upgrades, Stage I vapor recovery expansion, Stage II vapor recovery, intensified RACT for degreasing operations, NOX RACT, and RVP reduction to 7.8 psi. The redesignation request and maintenance plan meet the redesignation requirements in sections 107(d)(3)(E) and 175A of the Act as amended in 1990, respectively. The redesignation meets the Federal requirements of section 182(a)(1) of the Clean Air Act as a revision to the Michigan Ozone State Implementation Plan for the above mentioned counties.

(j) [Reserved]

(k) Determination—USEPA is determining that, as of July 20, 1995, the Grand Rapids and Muskegon ozone nonattainment areas have attained the ozone standard and that the reasonable further progress and attainment demonstration requirements of section 182(b)(1) and related requirements of section 172(c)(9) of the Clean Air Act do not apply to the areas for so long as the areas do not monitor any violations of the ozone standard. If a violation of the ozone NAAQS is monitored in either the Grand Rapids or Muskegon ozone nonattainment area, the determination shall no longer apply for the area that experiences the violation.

(l) Approval—EPA is approving the section 182(f) oxides of nitrogen (NOX) reasonably available control technology (RACT), new source review (NSR), vehicle inspection/maintenance (I/M), and general conformity exemptions for the Grand Rapids (Kent and Ottawa Counties) and Muskegon (Muskegon County) moderate nonattainment areas as requested by the States of Illinois, Indiana, Michigan, and Wisconsin in a July 13, 1994 submittal. This approval also covers the exemption of NOX transportation and general conformity requirements of section 176(c) for the Counties of Allegan, Barry, Bay, Berrien, Branch, Calhoun, Cass, Clinton, Eaton, Gratiot, Genesee, Hillsdale, Ingham, Ionia, Jackson, Kalamazoo, Lenawee, Midland, Montcalm, St. Joseph, Saginaw, Shiawasse, and Van Buren.

(m) Approval—On November 24, 1994, the Michigan Department of Natural Resources submitted a revision to the ozone State Implementation Plan. The submittal pertained to a plan for the implementation and enforcement of the Federal transportation conformity requirements at the State or local level in accordance with 40 CFR part 51, subpart T—Conformity to State or Federal Implementation Plans of Transportation Plans, Programs, and Projects Developed, Funded or Approved Under Title 23 U.S.C. or the Federal Transit Act.

(n) Approval—On November 29, 1994, the Michigan Department of Natural Resources submitted a revision to the ozone State Implementation Plan for general conformity rules. The general conformity SIP revisions enable the State of Michigan to implement and enforce the Federal general conformity requirements in the nonattainment or maintenance areas at the State or local level in accordance with 40 CFR part 93, subpart B—Determining Conformity of General Federal Actions to State or Federal Implementation Plans.

(o) Approval—On March 9, 1996, the Michigan Department of Environmental Quality submitted a request to redesignate the Grand Rapids ozone nonattainment area (consisting of Kent and Ottawa Counties) to attainment for ozone. As part of the redesignation request, the State submitted a maintenance plan as required by 175A of the Clean Air Act, as amended in 1990. Elements of the section 175A maintenance plan include an attainment emission inventory for NOX and VOC, a demonstration of maintenance of the ozone NAAQS with projected emission inventories to the year 2007 for NOX and VOC, a plan to verify continued attainment, a contingency plan, and a commitment to submit a subsequent maintenance plan revision in 8 years as required by the Clean Air Act. If a violation of the ozone NAAQS, determined not to be attributable to transport from upwind areas, is monitored, Michigan will implement one or more appropriate contingency measure(s) contained in the contingency plan. Once a violation of the ozone NAAQS is recorded, the State will notify EPA, review the data for quality assurance, and conduct a technical analysis, including an analysis of meteorological conditions leading up to and during the exceedances contributing to the violation, to determine local culpability. This preliminary analysis will be submitted to EPA and subjected to public review and comment. The State will solicit and consider EPA's technical advice and analysis before making a final determination on the cause of the violation. The Governor or his designee will select the contingency measure(s) to be implemented within 6 months of a monitored violation attributable to ozone and ozone precursors from the Grand Rapids area. The menu of contingency measures includes a motor vehicle inspection and maintenance program, Stage II vapor recovery, RVP reduction to 7.8 psi, RACT on major non-CTG VOC sources in the categories of coating of plastics, coating of wood furniture, and industrial cleaning solvents. The redesignation request and maintenance plan meet the redesignation requirements in section 107(d)(3)(E) and 175A of the Act as amended in 1990, respectively. The redesignation meets the Federal requirements of section 182(a)(1) of the Clean Air Act as a revision to the Michigan Ozone State Implementation Plan for the above mentioned counties.

(p) Approval—On November 22, 1995 the Michigan Department of Natural Resources submitted a petition for exemption from transportation conformity requirements for the Muskegon ozone nonattainment area. This approval exempts the Muskegon ozone nonattainment area from transportation conformity requirements under section 182(b)(1) of the Clean Air Act. If a violation of the ozone standard occurs in the Muskegon County ozone nonattainment area, the exemption shall no longer apply.

(q) Correction of approved plan—Michigan air quality Administrative Rule, R336.1901 (Rule 901)—Air Contaminant or Water Vapor, has been removed from the approved plan pursuant to section 110(k)(6) of the Clean Air Act (as amended in 1990).

(r) Approval—On March 9, 1995, the Michigan Department of Environmental Quality submitted a request to redesignate the Muskegon County ozone nonattainment area to attainment. As part of the redesignation request, the State submitted a maintenance plan as required by 175A of the Clean Air Act, as amended in 1990. Elements of the section 175A maintenance plan include a contingency plan, and an obligation to submit a subsequent maintenance plan revision in 8 years as required by the Clean Air Act. If the area records a violation of the 1-hour ozone NAAQS, determined not to be attributable to transport from upwind areas, Michigan will implement one or more appropriate contingency measure(s) which are in the contingency plan. The menu of contingency measures includes a motor vehicle inspection and maintenance program, stage II vapor recovery, a low Reid vapor pressure gasoline program, and rules for industrial cleanup solvents, plastic parts coating, and wood furniture coating.

(s) Approval—On May 9, 2000, the State of Michigan submitted a revision to the Michigan State Implementation Plan for ozone containing a section 175A maintenance plan for the Flint and Saginaw-Midland-Bay City areas as part of Michigan's request to redesignate the areas from nonattainment to attainment for ozone. Elements of the section 175A maintenance plan include a contingency plan, and an obligation to submit a subsequent maintenance plan revision in 8 years as required by the Clean Air Act. If monitors in any of these areas record a violation of the ozone NAAQS (which must be confirmed by the State), Michigan will adopt, submit to EPA, and implement one or more appropriate contingency measure(s) which are in the contingency plan and will submit a full maintenance plan under section 175A of the Clean Air Act. The menu of contingency measures includes a low Reid vapor pressure gasoline program, stage I gasoline vapor recovery, and rules for industrial cleanup solvents, plastic parts coating, and wood furniture coating.

(t) Approval—On March 9, 1995, the Michigan Department of Environmental Quality submitted a request to redesignate the Allegan County ozone nonattainment area to attainment. As part of the redesignation request, the State submitted a maintenance plan as required by 175A of the Clean Air Act, as amended in 1990. Elements of the section 175A maintenance plan include a contingency plan, and an obligation to submit a subsequent maintenance plan revision in 8 years as required by the Clean Air Act. If the area records a violation of the 1-hour ozone NAAQS, determined not to be attributable to transport from upwind areas, Michigan will implement one or more appropriate contingency measure(s) which are in the contingency plan. The menu of contingency measures includes rules for plastic parts coating, wood furniture coating, and gasoline loading (Stage I vapor recovery).

(u) Approval—On March 22, 2001, Michigan submitted a revision to the ozone maintenance plan for the Muskegon County area. The revision consists of allocating a portion of the Muskegon County area's Volatile Organic Compounds (VOC) and Oxides of Nitrogen (NOX) safety margin to the transportation conformity Motor Vehicle Emission Budget (MVEB). The MVEB for transportation conformity purposes for the Muskegon County area are now: 8.5 tons per day of VOC emissions and 10.2 tons per day of NOX emissions for the year 2010. This approval only changes the VOC and NOX transportation conformity MVEB for Muskegon County.

(v) Approval—On December 19, 2003, Michigan submitted an update to the Section 175(A) maintenance plan for the Southeast Michigan 1-hour ozone maintenance area, which consists of Livingston, Macomb, Monroe, Oakland, St. Clair, Washtenaw, and Wayne counties. This update addresses the second 10-year period of maintenance of the ozone standard in Southeast Michigan, which spans the years 2005 through 2015. The maintenance plan also revises the Motor Vehicle Emissions Budget (MVEB). For the year 2005, the MVEB for VOC is 218.1 tons per day (tpd), and the MVEB for NOX is 412.9 tpd. For the year 2015, the MVEB for VOC is 172.8 tpd, and the MVEB for NOX is 412.9 tpd.

(w) Approval—On June 17, 2005, the Michigan Department of Environmental Quality submitted a petition requesting the exemption from Clean Air Act oxides of nitrogen control requirements in six 8-hour ozone nonattainment areas. The Grand Rapids, Kalamazoo/Battle Creek, Lansing/East Lansing, Benzie County, Huron County, and Mason County nonattainment areas each receive an exemption. Section 182(f) of the 1990 amended Clean Air Act authorizes the exceptions. The exemption will no longer apply in an area if it experiences a violation of the 8-hour ozone standard.

(x) Approval—On May 9, 2006, Michigan submitted requests to redesignate the Grand Rapids (Kent and Ottawa Counties), Kalamazoo-Battle Creek (Calhoun, Kalamazoo, and Van Buren Counties), Lansing-East Lansing (Clinton, Eaton, and Ingham Counties), Benzie County, Huron County, and Mason County areas to attainment of the 8-hour ozone National Ambient Air Quality Standard (NAAQS). The State supplemented its redesignation requests on May 26, 2006, and August 25, 2006. As part of its redesignation requests, the State submitted maintenance plans as required by section 175A of the Clean Air Act. Elements of the section 175 maintenance plan include a contingency plan and an obligation to submit subsequent maintenance plan revisions in 8 years as required by the Clean Air Act. If monitors in any of these areas record a violation of the 8-hour ozone NAAQS, Michigan will adopt and implement one or more contingency measures. The list of possible contingency measures includes: Lower Reid vapor pressure gasoline requirements; reduced volatile organic compound (VOC) content in architectural, industrial, and maintenance coatings rule; auto body refinisher self-certification audit program; reduced VOC degreasing rule; transit improvements; diesel retrofit program; reduced VOC content in commercial and consumer products rule; and a program to reduce idling. Also included in the Michigan's submittal were motor vehicle emission budgets (MVEBs) for use to determine transportation conformity in the areas. For the Grand Rapids area, the 2018 MVEBs are 40.70 tpd for VOC and 97.87 tpd for oxides of nitrogen (NOX). For the Kalamazoo-Battle Creek area, the 2018 MVEBs are 29.67 tpd for VOC and 54.36 tpd for NOX. For the Lansing-East Lansing area, the 2018 MVEBs are 28.32 tpd for VOC and 53.07 tpd for NOX. For the Benzie County area, the 2018 MVEBs are 2.24 tpd for VOC and 1.99 tpd for NOX. For the Huron County area, the 2018 MVEBs are 2.34 tpd for VOC and 7.53 tpd for NOX. For the Mason County area, the 2018 MVEBs are 1.81 tpd for VOC and 2.99 tpd for NOX.

(y) Approval—On June 13, 2006, Michigan submitted requests to redesignate the Flint (Genesee and Lapeer Counties), Muskegon (Muskegon County), Benton Harbor (Berrien County), and Cass County areas to attainment of the 8-hour ozone National Ambient Air Quality Standard (NAAQS). The State supplemented its redesignation requests on August 25, 2006, and November 30, 2006. As part of its redesignation requests, the State submitted maintenance plans as required by section 175A of the Clean Air Act. Elements of the section 175 maintenance plan include a contingency plan and an obligation to submit subsequent maintenance plan revisions in 8 years as required by the Clean Air Act. If monitors in any of these areas record a violation of the 8-hour ozone NAAQS, Michigan will adopt and implement one or more contingency measures. The list of possible contingency measures includes: Lower Reid vapor pressure gasoline requirements; reduced volatile organic compound (VOC) content in architectural, industrial, and maintenance coatings rule; auto body refinisher self-certification audit program; reduced VOC degreasing rule; transit improvements; diesel retrofit program; reduced VOC content in commercial and consumer products rule; and a program to reduce idling. Also included in the Michigan's submittal were motor vehicle emission budgets (MVEBs) for use to determine transportation conformity in the areas. For the Flint area, the 2018 MVEBs are 25.68 tpd for VOC and 37.99 tpd for oxides of nitrogen (NOX). For the Muskegon area, the 2018 MVEBs are 6.67 tpd for VOC and 11.00 tpd for NOX. For the Benton Harbor area, the 2018 MVEBs are 9.16 tpd for VOC and 15.19 tpd for NOX. For the Cass County area, the 2018 MVEBs are 2.76 tpd for VOC and 3.40 tpd for NOX.

(z) Approval—On March 6, 2009, Michigan submitted a request to redesignate the Detroit-Ann Arbor area (Lenawee, Livingston, Macomb, Monroe, Oakland, St. Clair, Washtenaw, and Wayne Counties) to attainment of the 1997 8-hour ozone National Ambient Air Quality Standard (NAAQS). As part of its redesignation requests, the State submitted a maintenance plan as required by section 175A of the Clean Air Act. Elements of the section 175 maintenance plan include a contingency plan and an obligation to submit subsequent maintenance plan revisions in 8 years as required by the Clean Air Act. If monitors in any of these areas record a violation of the 8-hour ozone NAAQS, Michigan will adopt and implement one or more contingency measures. The list of possible contingency measures includes: Reduced VOC content in architectural, industrial, and maintenance (AIM) coatings rule; auto body refinisher self-certification audit program; reduced VOC degreasing/solvent cleaning rule; diesel retrofit program; reduced idling program; portable fuel container replacement rule; and, food preparation flame broiler control rule. Also included in the Michigan's submittal were a 2005 base year emissions inventory and motor vehicle emission budgets (MVEBs) for use to determine transportation conformity in the area. For the Detroit-Ann Arbor area, Michigan has established separate MVEBS for the Southeast Michigan Council of Governments (SEMCOG) region (Livingston, Macomb, Monroe, Oakland, St. Clair, Washtenaw, and Wayne Counties) and for Lenawee County. MDEQ has determined the 2020 MVEBs for the SEMCOG region to be 106 tons per day for VOC and 274 tpd for NOX. MDEQ has determined the 2020 MVEBs for Lenawee County to be 2.1 tpd for VOC and 4.4 tpd for NOX.

[45 FR 58528, Sept. 4, 1980] Editorial Note:For Federal Register citations affecting § 52.1174, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.

(a) The requirements of § 51.15(a)(2) of this chapter as of May 31, 1972, (36 FR 22398) are not met since Rule 336.49 of the Michigan Air Pollution Control Commission provides for individual compliance schedules to be submitted to the State Agency by January 1, 1974. This would not be in time for submittal to the Environmental Protection Agency with the first semiannual report.

(b) [Reserved]

(c) The requirements of § 51.262(a) of this chapter are not met since compliance schedules with adequate increments of progress have not been submitted for every source for which they are required.

(d) Federal compliance schedules. (1) Except as provided in paragraph (d)(3) of this section, the owner or operator of any stationary source subject to the following emission-limiting regulations in the Michigan implementation plan shall comply with the applicable compliance schedule in paragraph (d)(2) of this section: Air Pollution Control Commission, Department of Public Health, Michigan Rule 336.49.

(2) Compliance schedules. (i) The owner or operator of any boiler or furnace of more than 250 million Btu per hour heat input subject to Rule 336.49 and located in the Central Michigan Intrastate AQCR, South Bend-Elkhart-Benton Harbor Interstate AQCR, or Upper Michigan Intrastate AQCR (as defined in part 81 of this title) shall notify the Administrator, no later than October 1, 1973, of his intent to utilize either low-sulfur fuel or stack gas desulfurization to comply with the limitations effective July 1, 1975, in Table 3 or Table 4 of Rule 336.49.

(ii) Any owner or operator of a stationary source subject to paragraph (d)(2)(i) of this section who elects to utilize low-sulfur fuel shall take the following actions with respect to the source no later than the dates specified.

(a) November 1, 1973—Submit to the Administrator a projection of the amount of fuel, by types, that will be substantially adequate to enable compliance with Table 3 of Rule 336.49 on July 1, 1975, and for at least one year thereafter.

(b) December 31, 1973—Sign contracts with fuel suppliers for projected fuel requirements.

(c) January 31, 1974—Submit a statement as to whether boiler modifications will be required. If modifications will be required, submit plans for such modifications.

(d) March 15, 1974—Let contracts for necessary boiler modifications, if applicable.

(e) June 15, 1974—Initiate onsite modifications, if applicable.

(f) March 31, 1975—Complete onsite modifications, if applicable.

(g) July 1, 1975—Achieve final compliance with the applicable July 1, 1975, sulfur-in-fuel limitation listed in Table 3 of Rule 336.49.

(iii) Any owner or operator of a stationary source subject to paragraph (d)(2)(i) of this section who elects to utilize stack gas desulfurization shall take the following actions with respect to the source no later than the dates specified.

(a) November 1, 1973—Let necessary contracts for construction.

(b) March 1, 1974—Initiate onsite construction.

(c) March 31, 1975—Complete onsite construction.

(d) July 1, 1975—Achieve final compliance with the applicable July 1, 1975, emission limitation listed in Table 4 of Rule 336.49.

(e) If a performance test is necessary for a determination as to whether compliance has been achieved, such a test must be completed by July 1, 1975. Ten days prior to such a test, notice must be given to the Administrator to afford him the opportunity to have an observer present.

(iv) The owner or operator of any boiler or furnace of more than 250 million Btu per hour heat input subject to Rule 336.49 and located in the Central Michigan Intrastate AQCR. South Bend-Elkhart-Benton Harbor Interstate AQCR, or Upper Michigan Intrastate AQCR shall notify the Administrator, no later than January 31, 1974, of his intent to utilize either low-sulfur fuel or stack gas desulfurization to comply with the limitation effective July 1, 1978, in Table 3 or Table 4 of Rule 336.49.

(v) Any owner or operator of a stationary source subject to paragraph (d)(2)(iv) of this section who elects to utilize low-sulfur fuel shall take the following actions with respect to the source no later than the dates specified.

(a) October 15, 1976—Submit to the Administrator a projection of the amount of fuel, by types, that will be substantially adequate to enable compliance with Table 3 of Rule 336.49 on July 1, 1978, and for at least one year thereafter.

(b) December 31, 1976—Sign contracts with fuel suppliers for projected fuel requirements.

(c) January 31, 1977—Submit a statement as to whether boiler modifications will be required. If modifications will be required, submit plans for such modifications.

(d) March 15, 1977—Let contracts for necessary boiler modifications, if applicable.

(e) June 15, 1977—Initiate onsite modifications, if applicable.

(f) March 31, 1978—Complete onsite modifications, if applicable.

(g) July 1, 1978—Achieve final compliance with the applicable July 1, 1978, sulfur-in-fuel limitation listed in Table 3 of Rule 336.49.

(vi) Any owner or operator of a stationary source subject to paragraph (d)(2)(iv) of this section who elects to utilize stack gas desulfurization shall take the following actions with regard to the source no later than the dates specified.

(a) November 1, 1976—Let necessary contracts for construction.

(b) March 1, 1977—Initiate onsite construction.

(c) March 31, 1978—Complete onsite construction.

(d) July 1, 1978—Achieve final compliance with the applicable July 1, 1978, mission limitation listed in Table 4 of Rule 336.49.

(e) If a performance test is necessary for a determination as to whether compliance has been achieved, such a test must be completed by July 1, 1978. Ten days prior to such a test, notice must be given to the Administrator to afford him the opportunity to have an observer present.

(vii) Any owner or operator subject to a compliance schedule above shall certify to the Administrator, within five days after the deadline for each increment of progress in that schedule, whether or not the increment has been met.

(3)(i) Paragraphs (d) (1) and (2) of this section shall not apply to a source which is presently in compliance with Table 3 or Table 4 of Rule 336.49 and which has certified such compliance to the Administrator by October 1, 1973. The Administrator may request whatever supporting information he considers necessary for proper certification.

(ii) Any compliance schedule adopted by the State and approved by the Administrator shall satisfy the requirements of this paragraph for the affected source.

(iii) Any owner or operator subject to a compliance schedule in this paragraph may submit to the Administrator no later than October 1, 1973, a proposed alternative compliance schedule. No such compliance schedule may provide for final compliance after the final compliance date in the applicable compliance schedule of this paragraph. If promulgated by the Administrator, such schedule shall satisfy the requirements of this paragraph for the affected source.

(4) Nothing in this paragraph shall preclude the Administrator from promulgating a separate schedule for any source to which the application of the compliance schedule in paragraph (d)(2) of this section fails to satisfy the requirements of §§ 51.261 and 51.262(a) of this chapter.

(e) The compliance schedules for the sources identified below are approved as meeting the requirements of § 51.104 and subpart N of this chapter. All regulations cited are air pollution control regulations of the State, unless otherwise noted.

(f) The compliance schedules for the sources identified below are disapproved as not meeting the requirements of § 51.15 of this chapter. All regulations cited are air pollution control regulations of the State, unless otherwise noted.

[37 FR 10873, May 31, 1972] Editorial Note:For Federal Register citations affecting § 52.1175, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.

(a) Approval—On March 18, 1999, the Michigan Department of Environmental Quality submitted a request to redesignate the Detroit CO nonattainment area (consisting of portions of Wayne, Oakland and Macomb Counties) to attainment for CO. As part of the redesignation request, the State submitted a maintenance plan as required by 175A of the Clean Air Act, as amended in 1990. Elements of the section 175A maintenance plan include a base year (1996 attainment year) emission inventory for CO, a demonstration of maintenance of the ozone NAAQS with projected emission inventories to the year 2010, a plan to verify continued attainment, a contingency plan, and an obligation to submit a subsequent maintenance plan revision in 8 years as required by the Clean Air Act. If the area records a violation of the CO NAAQS (which must be confirmed by the State), Michigan will implement one or more appropriate contingency measure(s) which are contained in the contingency plan. The menu of contingency measures includes enforceable emission limitations for stationary sources, transportation control measures, or a vehicle inspection and maintenance program. The redesignation request and maintenance plan meet the redesignation requirements in sections 107(d)(3)(E) and 175A of the Act as amended in 1990.

(b) Approval—On December 19, 2003, Michigan submitted a request to revise its plan for the Southeast Michigan CO maintenance area (consisting of portions of Wayne, Oakland and Macomb Counties). The submittal contains updated emission inventories for 1996 and 2010, and an update to the 2010 motor vehicle emissions budget (MVEB). The 2010 MVEB is 3,842.9 tons of CO per day.

(c) Approval—On October 3, 2016, the State of Michigan submitted a revision to their Carbon Monoxide State Implementation Plan. The submittal established transportation conformity “Conformity” criteria and procedures related to interagency consultation, and enforceability of certain transportation related control and mitigation measures.

[70 FR 4023, Jan. 28, 2005, as amended at 82 FR 17136, Apr. 10, 2017]

(a) The requirements of sections 160 through 165 of the Clean Air Act are not met, since the plan does not include approvable procedures for preventing the significant deterioration of air quality.

(b) Regulations for preventing significant deterioration of air quality. The provisions of § 52.21 except paragraph (a)(1) are hereby incorporated and made a part of the applicable State plan for the State of Michigan.

(c) All applications and other information required pursuant to § 52.21 of this part from sources located in the State of Michigan shall be submitted to the state agency, Michigan Department of Natural Resources and Environment, Air Quality Division, P.O. Box 30028, Lansing, Michigan 48909, rather than to EPA's Region 5 office.

[45 FR 8299, Feb. 7, 1980; 45 FR 52741, Aug. 7, 1980, as amended at 68 FR 11323, Mar. 10, 2003; 68 FR 74489, Dec. 24, 2003; 75 FR 55275, Sept. 10, 2010]

(a) The requirements of Section 126(a)(1) of the Clean Air Act as amended in 1977 are not met since the state has not submitted to EPA, as a part of its State Implementation Plan, the procedures on which the state is relying to notify nearby states of any proposed major stationary source which may contribute significantly to levels of air pollution in excess of the National Ambient Air Quality Standards in that state.

[46 FR 30084, June 5, 1981]

(a) The requirements of Section 128 of the Clean Air Act as amended in 1977 are not met since the state has not submitted to EPA, as a part of its State Implementation Plan, the measures on which the state is relying to insure that the Air Pollution Control Commission contains a majority of members who represent the public interest and do not derive a significant portion of their income from persons subject to permits or enforcement orders under the Act and that the board members adequately disclose any potential conflicts of interest.

[46 FR 30084, June 5, 1981]

(a) [Reserved]

(b) Regulation for visibility monitoring and new source review. The provisions of § 52.28 are hereby incorporated and made a part of the applicable plan for the State of Michigan.

(c) [Reserved]

(d) Regional Haze. The requirements of section 169A of the Clean Air Act are not met because the regional haze plan submitted by Michigan on November 5, 2010, does not include fully approvable measures for meeting the requirements of 40 CFR 51.308(d)(3) and 51.308(e) with respect to emissions of NOX and SO2 from electric generating units. EPA has given limited approval and limited disapproval to the plan provisions addressing these requirements.

(e) Measures Addressing Limited Disapproval Associated With NOX. The deficiencies associated with NOX identified in EPA's limited disapproval of the regional haze plan submitted by Michigan on November 5, 2010, are satisfied by § 52.1186.

(f) Measures Addressing Limited Disapproval Associated With SO2. The deficiencies associated with SO2 identified in EPA's limited disapproval of the regional haze plan submitted by Michigan on November 5, 2010, are satisfied by § 52.1187.

(g) The requirements of section 169A of the Clean Air Act are not met because the regional haze plan submitted on November 5, 2010, does not meet the best available retrofit technology requirements of 40 CFR 51.308(e) with respect to emissions of NOX and SO2 from Saint Marys Cement in Charlevoix and NOX from Escanaba Paper Company in Escanaba. These requirements for these two facilities are satisfied by 40 CFR 52.1183(h) and 40 CFR 52.1183(i), respectively.

(h)(1) For the 30-day period beginning January 1, 2017, and thereafter, Saint Marys Cement, or any subsequent owner or operator of the Saint Marys Cement facility located in Charlevoix, Michigan, shall not cause or permit the emission of oxides of nitrogen (expressed as NO2) to exceed 2.80 lb per ton of clinker as a 30-day rolling average.

(2) For the 12-month period beginning January 1, 2017, and thereafter, Saint Marys Cement, or any subsequent owner or operator of the Saint Marys Cement facility located in Charlevoix, Michigan, shall not cause or permit the emission of NOX (expressed as NO2) to exceed 2.40 lb per ton of clinker as a 12-month average.

(3) Saint Marys Cement, or any subsequent owner or operator of the Saint Marys Cement facility located in Charlevoix, Michigan, shall not cause or permit the emission of SO2 to exceed 7.50 lb per ton of clinker as a 12-month average.

(4) Saint Marys Cement, or any subsequent owner or operator of the Saint Marys Cement facility located in Charlevoix, Michigan, shall operate continuous emission monitoring systems to measure NOX and SO2 emissions from its kiln system in conformance with 40 CFR part 60 appendix F procedure 1.

(5) The reference test method for assessing compliance with the limit in paragraph (h)(1) of this section shall be use of a continuous emission monitoring system operated in conformance with 40 CFR part 60, appendix F, procedure 1. A new 30-day average shall be computed at the end of each calendar day in which the kiln operates, based on the following procedure: First, sum the total pounds of NOX (expressed as NO2) emitted during the operating day and the previous twenty-nine operating days, second, sum the total tons of clinker produced during the same period, and third, divide the total number of pounds by the total clinker produced during the thirty operating days.

(6) The reference test method for assessing compliance with the limit in paragraphs (h)(2) and (h)(3) of this section shall be use of a continuous emission monitoring system operated in conformance with 40 CFR part 60, appendix F, procedure 1. A new 12-month average shall be computed at the end of each calendar month, based on the following procedure: First, sum the total pounds of NOX or SO2, as applicable, emitted from the unit during the month and the previous eleven calendar months, second, sum the total tons of clinker production during the same period, and third, divide the total number of pounds of emissions of NOX or SO2, as applicable, by the total clinker production during the twelve calendar months.

(7) Recordkeeping. The owner/operator shall maintain the following records for at least five years:

(i) All CEMS data, including the date, place, and time of sampling or measurement; parameters sampled or measured; and results.

(ii) All records of clinker production, which shall be monitored in accordance with 40 CFR 60.63.

(iii) Records of quality assurance and quality control activities for emissions measuring systems including, but not limited to, any records required by 40 CFR part 60, appendix F, Procedure 1.

(iv) Records of all major maintenance activities conducted on emission units, air pollution control equipment, CEMS and clinker production measurement devices.

(v) Any other records required by 40 CFR part 60, subpart F, or 40 CFR part 60, appendix F, procedure 1.

(8) Reporting. All reports under this section shall be submitted to Chief, Air Enforcement and Compliance Assurance Branch, U.S. Environmental Protection Agency, Region 5, Mail Code AE-17J, 77 W. Jackson Blvd., Chicago, IL 60604-3590.

(i) The owner/operator shall submit quarterly excess emissions reports for SO2 and NOX BART limits no later than the 30th day following the end of each calendar quarter. Excess emissions means emissions that exceed the emissions limits specified in paragraph (h)(1), (h)(2), and (h)(3) of this section. The reports shall include the magnitude, date(s), and duration of each period of excess emissions, specific identification of each period of excess emissions that occurs during startups, shutdowns, and malfunctions of the unit, the nature and cause of any malfunction (if known), and the corrective action taken or preventative measures adopted.

(ii) Owner/operator of each unit shall submit quarterly CEMS performance reports, to include dates and duration of each period during which the CEMS was inoperative (except for zero and span adjustments and calibration checks), reason(s) why the CEMS was inoperative and steps taken to prevent recurrence, and any CEMS repairs or adjustments.

(iii) The owner/operator shall also submit results of any CEMS performance tests required by 40 CFR part 60, appendix F, Procedure 1 (Relative Accuracy Test Audits, Relative Accuracy Audits, and Cylinder Gas Audits).

(iv) When no excess emissions have occurred or the CEMS has not been inoperative, repaired, or adjusted during the reporting period, such information shall be stated in the quarterly reports required by paragraphs (h)(7)(i) and (ii) of this section.

(i) Escanaba Paper Company, or any subsequent owner or operator of the Escanaba Paper Company facility in Escanaba, Michigan, shall meet the following requirements and shall not cause or permit the emission of NOX (expressed as NOX) to exceed the following limits:

(1) For Boiler 8, designated as EU8B13, a rolling 30-day average limit of 0.35 lb per MMBTU.

(2) A continuous emission monitoring system shall be operated to measure NOX emissions from Boiler 8 in conformance with 40 CFR part 60, appendix F.

(3) The reference test method for assessing compliance with the limit in paragraph (i)(1) of this section shall be a continuous emission monitoring system operated in conformance with 40 CFR part 60, appendix F. A new 30-day average shall be computed at the end of each calendar day in which the boiler operated, based on the following procedure: first, sum the total pounds of NOX emitted from the unit during the operating day and the previous twenty-nine operating days, second sum the total heat input to the unit in MMBTU during the same period, and third, divide the total number of pounds of NOX emitted by the total heat input during the thirty operating days.

(4) For Boiler 9, also identified as EU9B03, a limit of 0.27 lb per MMBTU.

(5) The reference test method for assessing compliance with the limit in paragraph (i)(4) of this section shall be a test conducted in accordance with 40 CFR part 60, appendix A, Method 7.

(6) Recordkeeping. The owner/operator shall maintain the following records regarding Boiler 8 and Boiler 9 for at least five years:

(i) All CEMS data, including the date, place, and time of sampling or measurement; parameters sampled or measured; and results.

(ii) All stack test results.

(iii) Daily records of fuel usage, heat input, and data used to determine heat content.

(iv) Records of quality assurance and quality control activities for emissions measuring systems including, but not limited to, any records required by 40 CFR part 60, appendix F, Procedure 1.

(v) Records of all major maintenance activities conducted on emission units, air pollution control equipment, and CEMS.

(vi) Any other records identified in 40 CFR 60.49b(g) or 40 CFR part 60, appendix F, Procedure 1.

(7) Reporting. All reports under this section shall be submitted to the Chief, Air Enforcement and Compliance Assurance Branch, U.S. Environmental Protection Agency, Region 5, Mail Code AE-17J, 77 W. Jackson Blvd., Chicago, IL 60604-3590.

(i) Owner/operator of Boiler 8 shall submit quarterly excess emissions reports for the limit in paragraph (i)(1) no later than the 30th day following the end of each calendar quarter. Excess emissions means emissions that exceed the emissions limit specified in paragraph (i)(1) of this section. The reports shall include the magnitude, date(s), and duration of each period of excess emissions, specific identification of each period of excess emissions that occurs during startups, shutdowns, and malfunctions of the unit, the nature and cause of any malfunction (if known), and the corrective action taken or preventative measures adopted.

(ii) Owner/operator of Boiler 8 shall submit quarterly CEMS performance reports, to include dates and duration of each period during which the CEMS was inoperative (except for zero and span adjustments and calibration checks or when Boiler 8 is not operating), reason(s) why the CEMS was inoperative and steps taken to prevent recurrence, and any CEMS repairs or adjustments.

(iii) Owner/operator of Boiler 8 shall also submit results of any CEMS performance tests required by 40 CFR part 60, appendix F, procedure 1 (Relative Accuracy Test Audits, Relative Accuracy Audits, and Cylinder Gas Audits).

(iv) When no excess emissions have occurred or the CEMS has not been inoperative, repaired, or adjusted during the reporting period, such information shall be stated in the quarterly reports required by paragraph (i)(7) of this section.

(v) Owner/operator of Boiler 9 shall submit reports of any compliance test measuring NOX emissions from Boiler 9 within 60 days of the last day of the test. If owner/operator commences operation of a continuous NOX emission monitoring system for Boiler 9, owner/operator shall submit reports for Boiler 9 as specified for Boiler 8 in paragraphs (i)(7)(i) to (i)(7)(iv) of this section.

(j) [Reserved]

(k) Tilden Mining Company, or any subsequent owner/operator of the Tilden Mining Company facility in Ishpeming, Michigan, shall meet the following requirements:

(1) NOX Emission Limits. (i) An emission limit of 2.8 lbs NOX/MMBTU, based on a 720-hour rolling average, shall apply to Tilden Grate Kiln Line 1 when burning natural gas, and an emission limit of 1.5 lbs NOX/MMBTU, based on a 720-hour rolling average, shall apply to Tilden Grate Kiln Line 1 when burning coal or a mixture of coal and natural gas. These emission limits will become enforceable 60 months after May 12, 2016 and only after EPA's confirmation or modification of the emission limit in accordance with the procedures set forth in paragraphs (k)(1)(ii) through (viii) of this section.

(ii) Compliance with these emission limits shall be demonstrated with data collected by a continuous emissions monitoring system (CEMS) for NOX. The owner or operator must start collecting CEMS data for NOX upon May 12, 2016 and submit the data to EPA no later than 30 days from the end of each calendar quarter. Any remaining data through the end of the 57th month from May 12, 2016, that does not fall within a calendar quarter, must be submitted to EPA no later than 30 days from the end of the 57th month. Although CEMS data must continue to be collected, it does not need to be submitted to EPA starting 57 months after May 12, 2016.

(iii) No later than 48 months from May 12, 2016, the owner or operator must submit to EPA a report, including any final report(s) completed by the selected NOX reduction technology supplier and furnace retrofit engineer, containing a detailed engineering analysis and modeling of the NOX reduction control technology being installed on Tilden Grate Kiln Line 1. This report must include a list of all variables that can reasonably be expected to have an impact on NOX emission control technology performance, as well as a description of how these variables can be adjusted to reduce NOX emissions to meet the NOX design emission limit. This NOX reduction control technology must be designed to meet emission limits of 2.8 lbs NOX/MMBTU when burning natural gas and 1.5 lbs NOX/MMBTU when burning coal or a mixture of coal and natural gas.

(iv) The NOX reduction control technology shall be installed on Tilden Grate Kiln Line 1 furnace no later than 50 months from May 12, 2016.

(v) Commencing on the earlier of: Six months from the installation of the NOX reduction control technology or 50 months from May 12, 2016, the owner or operator must provide to EPA the results from pellet quality analyses. The owner or operator shall provide the results from pellet quality analyses no later than 30 days from the end of each calendar quarter up until 57 months after May 12, 2016. Any remaining results through the end of the 57th month that do not fall within a calendar quarter must be submitted to EPA no later than 30 days from the end of the 57th month. The pellet quality analyses shall include results for the following factors: Compression, reducibility, before tumble, after tumble, and low temperature disintegration. For each of the pellet quality analysis factors the owner or operator must explain the pellet quality analysis factor as well as the defined acceptable range for each factor using the applicable product quality standards based upon customers' pellet specifications that are contained in Tilden's ISO 9001 quality management system. The owner or operator shall provide pellet quality analysis testing results that state the date and time of the analysis and, in order to define the time period when pellets were produced outside of the defined acceptable range for the pellet quality factors listed, provide copies of the production logs that document the starting and ending times for such periods. The owner or operator shall provide an explanation of causes for pellet samples that fail to meet the acceptable range for any pellet quality analysis factor. Pellet quality information and data may be submitted to EPA as Confidential Business Information.

(vi) No later than 57 months after May 12, 2016, the owner or operator may submit to EPA a report to either confirm or modify the NOX limits for Tilden Grate Kiln Line 1 within the upper and lower bounds described below. EPA will review the report and either confirm or modify the NOX limits. If the CEMS data collected during operating periods between months 50 and 57 that both meet pellet quality specifications and proper furnace/burner operation is normally distributed, the limit adjustment determination shall be based on the appropriate (depending upon whether data are statistically independent or dependent) 95% upper predictive limit (UPL) equations in paragraph (p) of this section. If the CEMS data collected during operating periods between months 50 and 57 that both meet pellet quality specifications and proper furnace/burner operation are not normally distributed, the limit adjustment determination shall be based on the non-parametric equation provided in paragraph (p) of this section. The data set for the determination shall exclude periods when pellet quality did not fall within the defined acceptable ranges of the pellet quality factors identified pursuant to paragraph (k)(1)(v) of this section and for any subsequent period when production had been reduced in response to pellet quality concerns consistent with Tilden's ISO 9001 operating standards. Any excluded period will commence at the time documented on the production log demonstrating pellet quality did not fall within the defined acceptable range and shall end when pellet quality within the defined acceptable range has been re-established at planned production levels, which will be presumed to be the level that existed immediately prior to the reduction in production due to pellet quality concerns. EPA may also exclude data where operations are inconsistent with the reported design parameters of the NOX reduction control technology that were installed.

(vii) EPA will take final agency action by publishing its final confirmation or modification of the NOX limits in the Federal Register no later than 60 months after May 12, 2016. The confirmed or modified NOX limit for Tilden Grate Kiln Line 1 when burning only natural gas may be no lower than 2.8 lbs NOX/MMBTU, based on a 720-hour rolling average, and may not exceed 3.0 lbs NOX/MMBTU, based on a 720-hour rolling average. The confirmed or modified NOX limit for Tilden Grate Kiln Line 1 when burning coal or a mixture of coal and natural gas may be no lower than 1.5 lbs NOX/MMBTU, based on a 720-hour rolling average, and may not exceed 2.5 lbs NOX/MMBTU, based on a 720-hour rolling average.

(viii) If the owner or operator submits a report proposing a single NOX limit for all fuels, EPA may approve the proposed NOX limit for all fuels based on a 30-day rolling average. The confirmed or modified limit will be established and enforceable within 60 months from May 12, 2016.

(2) SO2 Emission Limits. A fuel sulfur content limit of no greater than 1.20 percent sulfur content by weight shall apply to fuel combusted in Process Boiler #1 (EUBOILER1) and Process Boiler #2 (EUBOILER2) beginning three months from March 8, 2013. A fuel sulfur content limit of no greater than 1.50 percent sulfur content by weight shall apply to fuel combusted in the Line 1 Dryer (EUDRYER1) beginning 3 months from March 8, 2013. The sampling and calculation methodology for determining the sulfur content of fuel must be described in the monitoring plan required at paragraph (n)(8)(x) of this section.

(3) The owner or operator of the Tilden Grate Kiln Line 1 furnace shall meet an emission limit of 500 lbs SO2/hr based on a 30-day rolling average beginning six months after May 12, 2016. Compliance with these emission limits shall be demonstrated with data collected by a continuous emissions monitoring system (CEMS) for SO2. The owner or operator must start collecting CEMS data for SO2 beginning six months after May 12, 2016 and submit the data to EPA no later than 30 days from the end of each calendar quarter. The Tilden Grate Kiln Line 1 furnace shall not be limited to natural gas fuel. Beginning six months after May 12, 2016, any coal burned on Tilden Grate Kiln Line 1 shall have no more than 0.60 percent sulfur by weight based on a monthly block average. The sampling and calculation methodology for determining the sulfur content of coal must be described in the monitoring plan required for this furnace. The owner or operator must calculate an SO2 limit based on 12 continuous months of CEMS emissions data and submit such limit, calculations, and CEMS data to EPA no later than 36 months after May 12, 2016. If the submitted CEMS SO2 hourly data are normally distributed, the SO2 lbs/hr emission rate shall be based on the appropriate (depending upon whether data are statistically independent or dependent) 99% upper predictive limit (UPL) equation. If the submitted CEMS SO2 hourly data are not normally distributed, the SO2 lbs/hr emission rate shall be based on the non-parametric equation provided in paragraph (p) of this section. Compliance with the SO2 lbs/hr emission rate shall be determined on a 30-day rolling average basis. EPA will take final agency action by publishing a confirmation or modification of the SO2 limit in the Federal Register no later than 39 months after May 12, 2016. EPA may adjust the 500 lbs SO2/hr limit downward to reflect the calculated SO2 emission rate; however, EPA will not increase the SO2 limit above 500 lbs SO2/hr.

(4) Starting 26 months from May 12, 2016, records shall be kept for any day during which fuel oil is burned as fuel (either alone or blended with other fuels) in Grate Kiln Line 1. These records must include, at a minimum, the gallons of fuel oil burned per hour, the sulfur content of the fuel oil, and the SO2 emissions in pounds per hour.

(5) Starting 26 months from May 12, 2016, the SO2 limit for Grate Kiln Line 1 does not apply for any hour in which it is documented that there is a natural gas curtailment beyond Cliffs' control necessitating that the supply of natural gas to Tilden's Line 1 indurating furnace is restricted or eliminated. Records must be kept of the cause of the curtailment and duration of such curtailment. During such curtailment, the use of backup coal is restricted to coal with no greater than 0.60 percent sulfur by weight.

(l) Testing and monitoring. (1) The owner or operator shall install, certify, calibrate, maintain, and operate a CEMS for NOX on Tilden Grate Kiln Line 1. Compliance with the emission limits for NOX shall be determined using data from the CEMS.

(2) The owner or operator shall install, certify, calibrate, maintain, and operate a CEMS for SO2 on Tilden Grate Kiln Line 1. Compliance with the emission standard selected for SO2 shall be determined using data from the CEMS.

(3) The owner or operator shall install, certify, calibrate, maintain, and operate one or more continuous diluent monitor(s) (O2 or CO2) and continuous flow rate monitor(s) on Tilden Grate Kiln Line 1 to allow conversion of the NOX and SO2 concentrations to units of the standard (lbs/MMBTU and lbs/hr, respectively) unless a demonstration is made that a diluent monitor and continuous flow rate monitor are not needed for the owner or operator to demonstrate compliance with applicable emission limits in units of the standards.

(4) For purposes of this section, all CEMS required by this section must meet the requirements of paragraphs (l)(4)(i) through (xiv) of this section.

(i) All CEMS must be installed, certified, calibrated, maintained, and operated in accordance with 40 CFR part 60, appendix B, Performance Specification 2 (PS-2) and appendix F, Procedure 1.

(ii) All CEMS associated with monitoring NOX (including the NOX monitor and necessary diluent and flow rate monitors) must be installed and operational upon May 12, 2016. All CEMS associated with monitoring SO2 must be installed and operational no later than six months after May 12, 2016. Verification of the CEMS operational status shall, as a minimum, include completion of the manufacturer's written requirements or recommendations for installation, operation, and calibration of the devices.

(iii) The owner or operator must conduct a performance evaluation of each CEMS in accordance with 40 CFR part 60, appendix B, PS-2. The performance evaluations must be completed no later than 60 days after the respective CEMS installation.

(iv) The owner or operator of each CEMS must conduct periodic Quality Assurance, Quality Control (QA/QC) checks of each CEMS in accordance with 40 CFR part 60, appendix F, Procedure 1. The first CEMS accuracy test will be a relative accuracy test audit (RATA) and must be completed no later than 60 days after the respective CEMS installation.

(v) The owner or operator of each CEMS must furnish the Regional Administrator two, or upon request, more copies of a written report of the results of each performance evaluation and QA/QC check within 60 days of completion.

(vi) The owner or operator of each CEMS must check, record, and quantify the zero and span calibration drifts at least once daily (every 24 hours) in accordance with 40 CFR part 60, appendix F, Procedure 1, Section 4.

(vii) Except for CEMS breakdowns, repairs, calibration checks, and zero and span adjustments, all CEMS required by this section shall be in continuous operation during all periods of process operation of the indurating furnaces, including periods of process unit startup, shutdown, and malfunction.

(viii) All CEMS required by this section must meet the minimum data requirements at paragraphs (l)(4)(viii)(A) through (C) of this section.

(A) Complete a minimum of one cycle of operation (sampling, analyzing, and data recording) for each successive 15-minute quadrant of an hour.

(B) Sample, analyze, and record emissions data for all periods of process operation except as described in paragraph (l)(4)(viii)(C) of this section.

(C) When emission data from CEMS are not available due to continuous monitoring system breakdowns, repairs, calibration checks, or zero and span adjustments, emission data must be obtained using other monitoring systems or emission estimation methods approved by the EPA. The other monitoring systems or emission estimation methods to be used must be incorporated into the monitoring plan required by this section and provide information such that emissions data are available for a minimum of 18 hours in each 24-hour period and at least 22 out of 30 successive unit operating days.

(ix) Owners or operators of each CEMS required by this section must reduce all data to 1-hour averages. Hourly averages shall be computed using all valid data obtained within the hour but no less than one data point in each 15-minute quadrant of an hour. Notwithstanding this requirement, an hourly average may be computed from at least two data points separated by a minimum of 15 minutes (where the unit operates for more than one quadrant in an hour) if data are unavailable as a result of performance of calibration, quality assurance, preventive maintenance activities, or backups of data from data acquisition and handling systems and recertification events.

(x) The 30-day rolling average emission rate determined from data derived from the CEMS required by this section (in lbs/MMBTU or lbs/hr depending on the emission standard selected) must be calculated in accordance with paragraphs (l)(4)(x)(A) through (F) of this section.

(A) Sum the total pounds of the pollutant in question emitted from the unit during an operating day and the previous 29 operating days.

(B) Sum the total heat input to the unit (in MMBTU) or the total actual hours of operation (in hours) during an operating day and the previous 29 operating days.

(C) Divide the total number of pounds of the pollutant in question emitted during the 30 operating days by the total heat input (or actual hours of operation depending on the emission limit selected) during the 30 operating days.

(D) For purposes of this calculation, an operating day is any day during which fuel is combusted in the BART affected unit regardless of whether pellets are produced. Actual hours of operation are the total hours a unit is firing fuel regardless of whether a complete 24-hour operational cycle occurs (i.e., if the furnace is firing fuel for only five hours during a 24-hour period, then the actual operating hours for that day are five. Similarly, total number of pounds of the pollutant in question for that day is determined only from the CEMS data for the five hours during which fuel is combusted.)

(E) If the owner or operator of the CEMS required by this section uses an alternative method to determine 30-day rolling averages, that method must be described in detail in the monitoring plan required by this section. The alternative method will only be applicable if the final monitoring plan and the alternative method are approved by EPA.

(F) A new 30-day rolling average emission rate must be calculated for the period ending each new operating day.

(xi) The 720-hour rolling average emission rate determined from data derived from the CEMS required by this section (in lbs/MMBTU) must be calculated in accordance with paragraphs (l)(4)(xi)(A) through (C) of this section.

(A) Sum the total pounds of NOX emitted from the unit every hour and the previous (not necessarily consecutive) 719 hours for which that type of fuel (either natural gas or mixed coal and natural gas) was used.

(B) Sum the total heat input to the unit (in MMBTU) every hour and the previous (not necessarily consecutive) 719 hours for which that type of fuel (either natural gas or mixed coal and natural gas) was used.

(C) Divide the total number of pounds of NOX emitted during the 720 hours, as defined above, by the total heat input during the same 720-hour period. This calculation must be done separately for each fuel type (either for natural gas or mixed coal and natural gas).

(xii) Data substitution must not be used for purposes of determining compliance under this regulation.

(xiii) All CEMS data shall be reduced and reported in units of the applicable standard.

(xiv) A Quality Control Program must be developed and implemented for all CEMS required by this section in accordance with 40 CFR part 60, appendix F, Procedure 1, Section 3. The program will include, at a minimum, written procedures and operations for calibration checks, calibration drift adjustments, preventative maintenance, data collection, recording and reporting, accuracy audits/procedures, periodic performance evaluations, and a corrective action program for malfunctioning CEMS.

(m) Recordkeeping requirements. (1)(i) Records required by this section must be kept in a form suitable and readily available for expeditious review.

(ii) Records required by this section must be kept for a minimum of five years following the date of creation.

(iii) Records must be kept on site for at least two years following the date of creation and may be kept offsite, but readily accessible, for the remaining three years.

(2) The owner or operator of the BART affected unit must maintain the records identified in paragraphs (m)(2)(i) through (xi) of this section.

(i) A copy of each notification and report developed for and submitted to comply with this section including all documentation supporting any initial notification or notification of compliance status submitted, according to the requirements of this section.

(ii) Records of the occurrence and duration of each startup, shutdown, and malfunction of the BART affected unit, air pollution control equipment, and CEMS required by this section.

(iii) Records of activities taken during each startup, shutdown, and malfunction of the BART affected unit, air pollution control equipment, and CEMS required by this section.

(iv) Records of the occurrence and duration of all major maintenance conducted on the BART affected unit, air pollution control equipment, and CEMS required by this section.

(v) Records of each excess emission report, including all documentation supporting the reports, dates and times when excess emissions occurred, investigations into the causes of excess emissions, actions taken to minimize or eliminate the excess emissions, and preventative measures to avoid the cause of excess emissions from occurring again.

(vi) Records of all CEMS data including, as a minimum, the date, location, and time of sampling or measurement, parameters sampled or measured, and results.

(vii) All records associated with quality assurance and quality control activities on each CEMS as well as other records required by 40 CFR part 60, appendix F, Procedure 1 including, but not limited to, the quality control program, audit results, and reports submitted as required by this section.

(viii) Records of the NOX emissions during all periods of BART affected unit operation, including startup, shutdown, and malfunction, in the units of the standard. The owner or operator shall convert the monitored data into the appropriate unit of the emission limitation using appropriate conversion factors and F-factors. F-factors used for purposes of this section shall be documented in the monitoring plan and developed in accordance with 40 CFR part 60, appendix A, Method 19. The owner or operator may use an alternate method to calculate the NOX emissions upon written approval from EPA.

(ix) Records of the SO2 emissions or records of the removal efficiency (based on CEMS data), depending on the emission standard selected, during all periods of operation, including periods of startup, shutdown, and malfunction, in the units of the standard.

(x) Records associated with the CEMS unit including type of CEMS, CEMS model number, CEMS serial number, and initial certification of each CEMS conducted in accordance with 40 CFR part 60, appendix B, Performance Specification 2 must be kept for the life of the CEMS unit.

(xi) Records of all periods of fuel oil usage as required in paragraph (k)(4) of this section.

(n) Reporting requirements. (1) All requests, reports, submittals, notifications, and other communications to the Regional Administrator required by this section shall be submitted, unless instructed otherwise, to the Air and Radiation Division, U.S. Environmental Protection Agency, Region 5 (A-18J) at 77 West Jackson Boulevard, Chicago, Illinois 60604. References in this section to the Regional Administrator shall mean the EPA Regional Administrator for Region 5.

(2) The owner or operator of each BART affected unit identified in this section and CEMS required by this section must provide to the Regional Administrator the written notifications, reports, and plans identified at paragraphs (n)(2)(i) through (viii) of this section. If acceptable to both the Regional Administrator and the owner or operator of each BART affected unit identified in this section and CEMS required by this section the owner or operator may provide electronic notifications, reports, and plans.

(i) A notification of the date construction of control devices and installation of burners required by this section commences postmarked no later than 30 days after the commencement date.

(ii) A notification of the date the installation of each CEMS required by this section commences postmarked no later than 30 days after the commencement date.

(iii) A notification of the date the construction of control devices and installation of burners required by this section is complete postmarked no later than 30 days after the completion date.

(iv) A notification of the date the installation of each CEMS required by this section is complete postmarked no later than 30 days after the completion date.

(v) A notification of the date control devices and burners installed by this section startup postmarked no later than 30 days after the startup date.

(vi) A notification of the date CEMS required by this section postmarked no later than 30 days after the startup date.

(vii) A notification of the date upon which the initial CEMS performance evaluations are planned. This notification must be submitted at least 60 days before the performance evaluation is scheduled to begin.

(viii) A notification of initial compliance signed by the responsible official, who shall certify its accuracy, attesting to whether the source has complied with the requirements of this section, including, but not limited to, applicable emission standards, control device and burner installations, and CEMS installation and certification. This notification must be submitted before the close of business on the 60th calendar day following the completion of the compliance demonstration and must include, at a minimum, the information in paragraphs (n)(2)(viii)(A) through (F) of this section.

(A) The methods used to determine compliance.

(B) The results of any CEMS performance evaluations and other monitoring procedures or methods that were conducted.

(C) The methods that will be used for determining continuing compliance, including a description of monitoring and reporting requirements and test methods.

(D) The type and quantity of air pollutants emitted by the source, reported in units of the standard.

(E) A description of the air pollution control equipment and burners installed as required by this section for each emission point.

(F) A statement by the owner or operator as to whether the source has complied with the relevant standards and other requirements.

(3) The owner or operator must develop and implement a written startup, shutdown, and malfunction plan for NOX and SO2. The plan must include, at a minimum, procedures for operating and maintaining the source during periods of startup, shutdown, and malfunction and a program of corrective action for a malfunctioning process and air pollution control and monitoring equipment used to comply with the relevant standard. The plan must ensure that, at all times, the owner or operator operates and maintains each affected source, including associated air pollution control and monitoring equipment, in a manner which satisfies the general duty to minimize or eliminate emissions using good air pollution control practices. The plan must ensure that owners or operators are prepared to correct malfunctions as soon as practicable after their occurrence.

(4) The written reports of the results of each performance evaluation and QA/QC check in accordance with and as required in paragraph (l)(4)(v) of this section.

(5) Compliance reports. The owner or operator of each BART affected unit must submit semiannual compliance reports. The semiannual compliance reports must be submitted in accordance with paragraphs (n)(5)(i) through (iv) of this section, unless the Regional Administrator has approved a different schedule.

(i) The first compliance report must cover the period beginning on the compliance date that is specified for the affected source through June 30 or December 31, whichever date comes first after the compliance date that is specified for the affected source.

(ii) The first compliance report must be postmarked no later than 30 calendar days after the reporting period covered by that report (July 30 or January 30), whichever comes first.

(iii) Each subsequent compliance report must cover the semiannual reporting period from January 1 through June 30 or the semiannual reporting period from July 1 through December 31.

(iv) Each subsequent compliance report must be postmarked no later than 30 calendar days after the reporting period covered by that report (July 30 or January 30).

(6) Compliance report contents. Each compliance report must include the information in paragraphs (n)(6)(i) through (vi) of this section.

(i) Company name and address.

(ii) Statement by a responsible official, with the official's name, title, and signature, certifying the truth, accuracy, and completeness of the content of the report.

(iii) Date of report and beginning and ending dates of the reporting period.

(iv) Identification of the process unit, control devices, and CEMS covered by the compliance report.

(v) A record of each period of a startup, shutdown, or malfunction during the reporting period and a description of the actions the owner or operator took to minimize or eliminate emissions arising as a result of the startup, shutdown, or malfunction and whether those actions were or were not consistent with the source's startup, shutdown, and malfunction plan.

(vi) A statement identifying whether there were or were not any deviations from the requirements of this section during the reporting period. If there were deviations from the requirements of this section during the reporting period, then the compliance report must describe in detail the deviations which occurred, the causes of the deviations, actions taken to address the deviations, and procedures put in place to avoid such deviations in the future. If there were no deviations from the requirements of this section during the reporting period, then the compliance report must include a statement that there were no deviations. For purposes of this section, deviations include, but are not limited to, emissions in excess of applicable emission standards established by this section, failure to continuously operate an air pollution control device in accordance with operating requirements designed to assure compliance with emission standards, failure to continuously operate CEMS required by this section, and failure to maintain records or submit reports required by this section.

(7) Each owner or operator of a CEMS required by this section must submit quarterly excess emissions and monitoring system performance reports to the Regional Administrator for each pollutant monitored for each BART affected unit monitored. All reports must be postmarked by the 30th day following the end of each 3-month period of a calendar year (January-March, April-June, July-September, October-December) and must include, at a minimum, the requirements of paragraphs (n)(7)(i) through (xv) of this section.

(i) Company name and address.

(ii) Identification and description of the process unit being monitored.

(iii) The dates covered by the reporting period.

(iv) Total source operating hours for the reporting period.

(v) Monitor manufacturer, monitor model number, and monitor serial number.

(vi) Pollutant monitored.

(vii) Emission limitation for the monitored pollutant.

(viii) Date of latest CEMS certification or audit.

(ix) A description of any changes in continuous monitoring systems, processes, or controls since the last reporting period.

(x) A table summarizing the total duration of excess emissions, as defined in paragraphs (n)(7)(x)(A) through (B) of this section, for the reporting period broken down by the cause of those excess emissions (startup/shutdown, control equipment problems, process problems, other known causes, unknown causes), and the total percent of excess emissions (for all causes) for the reporting period calculated as described in paragraph (n)(7)(x)(C) of this section.

(A) For purposes of this section, an excess emission is defined as any 30-day or 720-hour rolling average period, including periods of startup, shutdown, and malfunction, during which the 30-day or 720-hour (as appropriate) rolling average emissions of either regulated pollutant (SO2 and NOX), as measured by a CEMS, exceeds the applicable emission standards in this section.

(B)(1) For purposes of this section, if a facility calculates a 30-day rolling average emission rate in accordance with this section which exceeds the applicable emission standards of this section, then it will be considered 30 days of excess emissions. If the following 30-day rolling average emission rate is calculated and found to exceed the applicable emission standards of this section as well, then it will add one more day to the total days of excess emissions (i.e. 31 days). Similarly, if an excess emission is calculated for a 30-day rolling average period and no additional excess emissions are calculated until 15 days after the first, then that new excess emission will add 15 days to the total days of excess emissions (i.e. 30 + 15 = 45). For purposes of this section, if an excess emission is calculated for any period of time within a reporting period, there will be no fewer than 30 days of excess emissions but there should be no more than 121 days of excess emissions for a reporting period.

(2) For purposes of this section, if a facility calculates a 720-hour rolling average emission rate in accordance with this section which exceeds the applicable emission standards of this section, then it will be considered 30 days of excess emissions. If the 24th following 720-hour rolling average emission rate is calculated and found to exceed the applicable emission standards of the rule as well, then it will add one more day to the total days of excess emissions (i.e. 31 days). Similarly, if an excess emission is calculated for a 720-hour rolling average period and no additional excess emissions are calculated until 360 hours after the first, then that new excess emission will add 15 days to the total days of excess emissions (i.e. 30+15 = 45). For purposes of this section, if an excess emission is calculated for any period of time with a reporting period, there will be no fewer than 30 days of excess emissions but there should be no more than 121 days of excess emissions for a reporting period.

(C) For purposes of this section, the total percent of excess emissions will be determined by summing all periods of excess emissions (in days) for the reporting period, dividing that number by the total BART affected unit operating days for the reporting period, and then multiplying by 100 to get the total percent of excess emissions for the reporting period. An operating day, as defined previously, is any day during which fuel is fired in the BART affected unit for any period of time. Because of the possible overlap of 30-day rolling average excess emissions across quarters, there are some situations where the total percent of excess emissions could exceed 100 percent. This extreme situation would only result from serious excess emissions problems where excess emissions occur for nearly every day during a reporting period.

(xi) A table summarizing the total duration of monitor downtime, as defined in paragraph (n)(7)(xi)(A) of this section, for the reporting period broken down by the cause of the monitor downtime (monitor equipment malfunctions, non-monitor equipment malfunctions, quality assurance calibration, other known causes, unknown causes), and the total percent of monitor downtime (for all causes) for the reporting period calculated as described in paragraph (n)(7)(xi)(B) of this section.

(A) For purposes of this section, monitor downtime is defined as any period of time (in hours) during which the required monitoring system was not measuring emissions from the BART affected unit. This includes any period of CEMS QA/QC, daily zero and span checks, and similar activities.

(B) For purposes of this section, the total percent of monitor downtime will be determined by summing all periods of monitor downtime (in hours) for the reporting period, dividing that number by the total number of BART affected unit operating hours for the reporting period, and then multiplying by 100 to get the total percent of excess emissions for the reporting period.

(xii) A table which identifies each period of excess emissions for the reporting period and includes, at a minimum, the information in paragraphs (n)(7)(xii)(A) through (F) of this section.

(A) The date of each excess emission.

(B) The beginning and end time of each excess emission.

(C) The pollutant for which an excess emission occurred.

(D) The magnitude of the excess emission.

(E) The cause of the excess emission.

(F) The corrective action taken or preventative measures adopted to minimize or eliminate the excess emissions and prevent such excess emission from occurring again.

(xiii) A table which identifies each period of monitor downtime for the reporting period and includes, at a minimum, the information in paragraphs (n)(7)(xiii)(A) through (D) of this section.

(A) The date of each period of monitor downtime.

(B) The beginning and end time of each period of monitor downtime.

(C) The cause of the period of monitor downtime.

(D) The corrective action taken or preventative measures adopted for system repairs or adjustments to minimize or eliminate monitor downtime and prevent such downtime from occurring again.

(xiv) If there were no periods of excess emissions during the reporting period, then the excess emission report must include a statement which says there were no periods of excess emissions during this reporting period.

(xv) If there were no periods of monitor downtime, except for daily zero and span checks, during the reporting period, then the excess emission report must include a statement which says there were no periods of monitor downtime during this reporting period except for the daily zero and span checks.

(8) The owner or operator of each CEMS required by this section must develop and submit for review and approval by the Regional Administrator a site specific monitoring plan. The purpose of this monitoring plan is to establish procedures and practices which will be implemented by the owner or operator in its effort to comply with the monitoring, recordkeeping, and reporting requirements of this section. The monitoring plan must include, at a minimum, the information in paragraphs (n)(8)(i) through (x) of this section.

(i) Site specific information including the company name, address, and contact information.

(ii) The objectives of the monitoring program implemented and information describing how those objectives will be met.

(iii) Information on any emission factors used in conjunction with the CEMS required by this section to calculate emission rates and a description of how those emission factors were determined.

(iv) A description of methods to be used to calculate emission rates when CEMS data are not available due to downtime associated with QA/QC events.

(v) A description of the QA/QC program to be implemented by the owner or operator of CEMS required by this section. This can be the QA/QC program developed in accordance with 40 CFR part 60, appendix F, Procedure 1, Section 3.

(vi) A list of spare parts for CEMS maintained on site for system maintenance and repairs.

(vii) A description of the procedures to be used to calculate 30-day rolling averages and 720-hour rolling averages and example calculations which show the algorithms used by the CEMS to calculate 30-day rolling averages and 720-hour rolling averages.

(viii) A sample of the document to be used for the quarterly excess emission reports required by this section.

(ix) A description of the procedures to be implemented to investigate root causes of excess emissions and monitor downtime and the proposed corrective actions to address potential root causes of excess emissions and monitor downtime.

(x) A description of the sampling and calculation methodology for determining the percent sulfur by weight as a monthly block average for coal used during that month.

(o) The requirements of section 169A of the Clean Air Act are not met because the regional haze plan submitted by the state on November 5, 2010, does not meet the requirements of 40 CFR 51.308(e) with respect to NOX and SO2 emissions from Tilden Mining Company L.C. of Ishpeming, Michigan. The requirements for this facility are satisfied by complying with § 52.1183(k-n)

(p) Equations for establishing the upper predictive limit—(1) Equation for normal distribution and statistically independent data.

Where: x = average or mean of hourly test run data; t[(n−1),(0.95)] = t score, the one-tailed t value of the Student's t distribution for a specific degree of freedom (n−1) and a confidence level (0.95; 0.99 for Tilden SO2) s 2 = variance of the hourly data set; n = number of values (e.g. 5,760 if 8 months of valid lbs NOX/MMBTU hourly values) m = number of values used to calculate the test average (m = 720 as per averaging time)

(i) To determine if statistically independent, use the Rank von Neumann Test on p. 137 of data Quality Assessment: Statistical Methods for Practitioners EPA QA/G-9S.

(ii) Alternative to Rank von Neumann test to determine if data are dependent, data are dependent if t test value is greater than t critical value, where:

ρ = correlation between data points t critical = t[(n−2),(0.95)] = t score, the two-tailed t value of the Student's t distribution for a specific degree of freedom (n−2) and a confidence level (0.95)

(iii) The Anderson-Darling normality test is used to establish whether the data are normally distributed. That is, a distribution is considered to be normally distributed when p > 0.05.

(2) Non-parametric equation for data not normally distributed and normally distributed but not statistically independent.

m = (n + 1) * α m = the rank of the ordered data point, when data are sorted smallest to largest. The data points are 720-hour averages for establishing NOX limits. n = number of data points (e.g., 5040 720-hourly averages for eight months of valid NOX lbs/MMBTU values) α = 0.95, to reflect the 95th percentile

If m is a whole number, then the limit, UPL, shall be computed as:

UPL = Xm Where: Xm = value of the m th data point in terms of lbs SO2/hr or lbs NOX/MMBTU, when the data are sorted smallest to largest.

If m is not a whole number, the limit shall be computed by linear interpolation according to the following equation.

UPL = xm = xmi·md = xmi + 0.md (xmi+1−xmi) Where: mi = the integer portion of m, i.e., m truncated at zero decimal places, and md = the decimal portion of m [50 FR 28553, July 12, 1985, as amended at 52 FR 45137, Nov. 24, 1987; 77 FR 33657, June 7, 2012; 77 FR 71550, Dec. 3, 2012; 78 FR 8733, Feb. 6, 2013; 78 FR 59839, Sept. 30, 2013; 81 FR 21681, Apr. 12, 2016; 82 FR 3129, Jan. 10, 2017]

The Michigan program submitted on November 13, 1992, January 8, 1993, and November 12, 1993, as a requested revision to the Michigan State Implementation Plan satisfies the requirements of section 507 of the Clean Air Act Amendments of 1990.

[59 FR 28788, June 3, 1994]

(a) Approval—On November 24, 1994, the Michigan Department of Natural Resources submitted a revision to the carbon monoxide State Implementation Plan. The submittal pertained to a plan for the implementation and enforcement of the Federal transportation conformity requirements at the State or local level in accordance with 40 CFR part 51, subpart T—Conformity to State or Federal Implementation Plans of Transportation Plans, Programs, and Projects Developed, Funded or Approved Under Title 23 U.S.C. or the Federal Transit Act.

(b) Approval—On November 29, 1994, the Michigan Department of Natural Resources submitted a revision to the carbon monoxide State Implementation Plan for general conformity rules. The general conformity SIP revisions enable the State of Michigan to implement and enforce the Federal general conformity requirements in the nonattainment or maintenance areas at the State or local level in accordance with 40 CFR part 93, subpart B—Determining Conformity of General Federal Actions to State or Federal Implementation Plans.

[61 FR 66609, 66611, Dec. 18, 1996]

(a)(1) The owner and operator of each source located within the State of Michigan and for which requirements are set forth under the Federal CAIR NOX Annual Trading Program in subparts AA through II of part 97 of this chapter must comply with such applicable requirements. The obligation to comply with these requirements in part 97 of this chapter will be eliminated by the promulgation of an approval by the Administrator of a revision to the Michigan State Implementation Plan (SIP) as meeting the requirements of CAIR for PM2.5 relating to NOX under § 51.123 of this chapter, except to the extent the Administrator's approval is partial or conditional or unless such approval is under § 51.123(p) of this chapter.

(2) Notwithstanding any provisions of paragraph (a)(1) of this section, if, at the time of such approval of the State's SIP, the Administrator has already allocated CAIR NOX allowances to sources in the State for any years, the provisions of part 97 of this chapter authorizing the Administrator to complete the allocation of CAIR NOX allowances for those years shall continue to apply, unless the Administrator approves a SIP provision that provides for the allocation of the remaining CAIR NOX allowances for those years.

(b)(1) The owner and operator of each NOX source located within the State of Michigan and for which requirements are set forth under the Federal CAIR NOX Ozone Season Trading Program in subparts AAAA through IIII of part 97 of this chapter must comply with such applicable requirements. The obligation to comply with these requirements in part 97 of this chapter will be eliminated by the promulgation of an approval by the Administrator of a revision to the Michigan State Implementation Plan (SIP) as meeting the requirements of CAIR for ozone relating to NOX under § 51.123 of this chapter, except to the extent the Administrator's approval is partial or conditional or unless such approval is under § 51.123(ee) of this chapter.

(2) Notwithstanding any provisions of paragraph (b)(1) of this section, if, at the time of such approval of the State's SIP, the Administrator has already allocated CAIR NOX Ozone Season allowances to sources in the State for any years, the provisions of part 97 of this chapter authorizing the Administrator to complete the allocation of CAIR NOX Ozone Season allowances for those years shall continue to apply, unless the Administrator approves a SIP provision that provides for the allocation of the remaining CAIR NOX Ozone Season allowances for those years.

(c) Notwithstanding any provisions of paragraphs (a) and (b) of this section and subparts AA through II and AAAA through IIII of part 97 of this chapter to the contrary:

(1) With regard to any control period that begins after December 31, 2014,

(i) The provisions in paragraphs (a) and (b) of this section relating to NOX annual or ozone season emissions shall not be applicable; and

(ii) The Administrator will not carry out any of the functions set forth for the Administrator in subparts AA through II and AAAA through IIII of part 97 of this chapter;

(2) The Administrator will not deduct for excess emissions any CAIR NOX allowances or CAIR NOX Ozone Season allowances allocated for 2015 or any year thereafter;

(3) By March 3, 2015, the Administrator will remove from the CAIR NOX Allowance Tracking System accounts all CAIR NOX allowances allocated for a control period in 2015 and any subsequent year, and, thereafter, no holding or surrender of CAIR NOX allowances will be required with regard to emissions or excess emissions for such control periods; and

(4) By March 3, 2015, the Administrator will remove from the CAIR NOX Ozone Season Allowance Tracking System accounts all CAIR NOX Ozone Season allowances allocated for a control period in 2015 and any subsequent year, and, thereafter, no holding or surrender of CAIR NOX Ozone Season allowances will be required with regard to emissions or excess emissions for such control periods.

(d)(1) The owner and operator of each source and each unit located in the State of Michigan and Indian country within the borders of the State and for which requirements are set forth under the CSAPR NOX Annual Trading Program in subpart AAAAA of part 97 of this chapter must comply with such requirements. The obligation to comply with such requirements with regard to sources and units in the State will be eliminated by the promulgation of an approval by the Administrator of a revision to Michigan's State Implementation Plan (SIP) as correcting the SIP's deficiency that is the basis for the CSAPR Federal Implementation Plan under § 52.38(a) for those sources and units, except to the extent the Administrator's approval is partial or conditional. The obligation to comply with such requirements with regard to sources and units located in Indian country within the borders of the State will not be eliminated by the promulgation of an approval by the Administrator of a revision to Michigan's SIP.

(2) Notwithstanding the provisions of paragraph (d)(1) of this section, if, at the time of the approval of Michigan's SIP revision described in paragraph (d)(1) of this section, the Administrator has already started recording any allocations of CSAPR NOX Annual allowances under subpart AAAAA of part 97 of this chapter to units in the State for a control period in any year, the provisions of subpart AAAAA of part 97 of this chapter authorizing the Administrator to complete the allocation and recordation of CSAPR NOX Annual allowances to units in the State for each such control period shall continue to apply, unless provided otherwise by such approval of the State's SIP revision.

(e)(1) The owner and operator of each source and each unit located in the State of Michigan and Indian country within the borders of the State and for which requirements are set forth under the CSAPR NOX Ozone Season Group 1 Trading Program in subpart BBBBB of part 97 of this chapter must comply with such requirements with regard to emissions occurring in 2015 and 2016.

(2) The owner and operator of each source and each unit located in the State of Michigan and Indian country within the borders of the State and for which requirements are set forth under the CSAPR NOX Ozone Season Group 2 Trading Program in subpart EEEEE of part 97 of this chapter must comply with such requirements with regard to emissions occurring in 2017 through 2020.

(3) The owner and operator of each source and each unit located in the State of Michigan and Indian country within the borders of the State and for which requirements are set forth under the CSAPR NOX Ozone Season Group 3 Trading Program in subpart GGGGG of part 97 of this chapter must comply with such requirements with regard to emissions occurring in 2021 and each subsequent year. The obligation to comply with such requirements with regard to sources and units in the State and areas of Indian country within the borders of the State subject to the State's SIP authority will be eliminated by the promulgation of an approval by the Administrator of a revision to Michigan's State Implementation Plan (SIP) as correcting the SIP's deficiency that is the basis for the CSAPR Federal Implementation Plan (FIP) under § 52.38(b)(1) and (b)(2)(iii) for those sources and units, except to the extent the Administrator's approval is partial or conditional. The obligation to comply with such requirements with regard to sources and units located in areas of Indian country within the borders of the State not subject to the State's SIP authority will not be eliminated by the promulgation of an approval by the Administrator of a revision to Michigan's SIP.

(4) Notwithstanding the provisions of paragraph (e)(3) of this section, if, at the time of the approval of Michigan's SIP revision described in paragraph (e)(3) of this section, the Administrator has already started recording any allocations of CSAPR NOX Ozone Season Group 3 allowances under subpart GGGGG of part 97 of this chapter to units in the State and areas of Indian country within the borders of the State subject to the State's SIP authority for a control period in any year, the provisions of subpart GGGGG of part 97 of this chapter authorizing the Administrator to complete the allocation and recordation of CSAPR NOX Ozone Season Group 3 allowances to such units for each such control period shall continue to apply, unless provided otherwise by such approval of the State's SIP revision.

(5) Notwithstanding the provisions of paragraph (e)(2) of this section, after 2020 the provisions of § 97.826(c) of this chapter (concerning the transfer of CSAPR NOX Ozone Season Group 2 allowances between certain accounts under common control), the provisions of § 97.826(d) of this chapter (concerning the conversion of amounts of unused CSAPR NOX Ozone Season Group 2 allowances allocated for control periods before 2021 to different amounts of CSAPR NOX Ozone Season Group 3 allowances), and the provisions of § 97.811(d) of this chapter (concerning the recall of CSAPR NOX Ozone Season Group 2 allowances equivalent in quantity and usability to all such allowances allocated to units in the State and Indian country within the borders of the State for control periods after 2020) shall continue to apply.

(f) The owner and operator of each source located in the State of Michigan and Indian country within the borders of the State and for which requirements are set forth in § 52.40 and § 52.41, § 52.42, § 52.43, § 52.44, § 52.45, or § 52.46 must comply with such requirements with regard to emissions occurring in 2026 and each subsequent year.

[72 FR 62350, Nov. 2, 2007, as amended at 76 FR 48367, Aug. 8, 2011; 76 FR 80774, Dec. 27, 2011; 79 FR 71671, Dec. 3, 2014; 81 FR 74586, 74597, Oct. 26, 2016; 83 FR 65924, Dec. 21, 2018; 86 FR 23175, Apr. 30, 2021; 88 FR 36891, June 5, 2023]

(a) The owner and operator of each SO2 source located within the State of Michigan and for which requirements are set forth under the Federal CAIR SO2 Trading Program in subparts AAA through III of part 97 of this chapter must comply with such applicable requirements. The obligation to comply with these requirements in part 97 of this chapter will be eliminated by the promulgation of an approval by the Administrator of a revision to the Michigan State Implementation Plan as meeting the requirements of CAIR for PM2.5 relating to SO2 under § 51.124 of this chapter, except to the extent the Administrator's approval is partial or conditional or unless such approval is under § 51.124(r) of this chapter.

(b) Notwithstanding any provisions of paragraph (a) of this section and subparts AAA through III of part 97 of this chapter and any State's SIP to the contrary:

(1) With regard to any control period that begins after December 31, 2014,

(i) The provisions of paragraph (a) of this section relating to SO2 emissions shall not be applicable; and

(ii) The Administrator will not carry out any of the functions set forth for the Administrator in subparts AAA through III of part 97 of this chapter; and

(2) The Administrator will not deduct for excess emissions any CAIR SO2 allowances allocated for 2015 or any year thereafter.

(c)(1) The owner and operator of each source and each unit located in the State of Michigan and Indian country within the borders of the State and for which requirements are set forth under the CSAPR SO2 Group 1 Trading Program in subpart CCCCC of part 97 of this chapter must comply with such requirements. The obligation to comply with such requirements with regard to sources and units in the State will be eliminated by the promulgation of an approval by the Administrator of a revision to Michigan's State Implementation Plan (SIP) as correcting the SIP's deficiency that is the basis for the CSAPR Federal Implementation Plan under § 52.39 for those sources and units, except to the extent the Administrator's approval is partial or conditional. The obligation to comply with such requirements with regard to sources and units located in Indian country within the borders of the State will not be eliminated by the promulgation of an approval by the Administrator of a revision to Michigan's SIP.

(2) Notwithstanding the provisions of paragraph (c)(1) of this section, if, at the time of the approval of Michigan's SIP revision described in paragraph (c)(1) of this section, the Administrator has already started recording any allocations of CSAPR SO2 Group 1 allowances under subpart CCCCC of part 97 of this chapter to units in the State for a control period in any year, the provisions of subpart CCCCC of part 97 of this chapter authorizing the Administrator to complete the allocation and recordation of CSAPR SO2 Group 1 allowances to units in the State for each such control period shall continue to apply, unless provided otherwise by such approval of the State's SIP revision.

[72 FR 62350, Nov. 2, 2007, as amended at 76 FR 48368, Aug. 8, 2011; 79 FR 71671, Dec. 3, 2014; 81 FR 74586, 74597, Oct. 26, 2016]

(a) Based upon EPA's review of the air quality data for the three-year period 2012 to 2014, EPA determined that the Belding, MI Pb nonattainment area has attained the 2008 Pb National Ambient Air Quality Standard (NAAQS). This clean data determination suspends the requirements for this area to submit an attainment demonstration, associated reasonably available control measures, a reasonable further progress plan, contingency measures, and other planning SIPs related to attainment of the standard as long as this area continues to meet the 2008 Pb NAAQS.

(b) Michigan's 2013 lead emissions inventory for the Belding area as submitted on January 12, 2016, satisfying the emission inventory requirements of section 172(c)(3) of the Clean Air Act for the Belding area.

(c) Approval. The 2008 lead maintenance plan for the Belding, Michigan nonattainment area has been approved as submitted on January 12, 2016.

[80 FR 43960, July 24, 2015, as amended at 82 FR 24870, May 31, 2017]

(a) The plan submitted by the State on May 31, 2016 to attain the 2010 1-hour primary sulfur dioxide (SO2) national ambient air quality standard for the Detroit SO2 nonattainment area does not meet the requirements of Clean Air Act (CAA) section 172 with respect to SO2 emissions from the U.S. Steel (Ecorse and Zug Island), EES Coke, Cleveland-Cliffs Steel Corporation (formerly AK or Severstal Steel), and Dearborn Industrial Generation (DIG) facilities in the Detroit, Michigan area. These requirements for these four facilities are satisfied by paragraphs (b)through(e) of this section, respectively.

(b) This section addresses and satisfies CAA section 172 requirements for the Detroit SO2 nonattainment area by specifying the necessary emission limits and other control measures applicable to the U.S. Steel Ecorse and Zug Island facilities. This section applies to the owner(s) and operator(s) of the facilities located at 1 Quality Drive and 1300 Zug Island Road in Detroit, Michigan. The requirements in this section for the Hot Strip Mill Slab Reheat Furnaces 1-5, No. 2 Baghouse, Main Plant Boiler No. 8, and Main Plant Boiler No. 9 apply to the owner and operator of the U.S. Steel Ecorse facility, and the requirements in this section for Boilerhouse 1, Boilerhouse 2, A1 Blast Furnace, B2 Blast Furnace, D4 Blast Furnace, A/B Blast Furnace Flares, and D Furnace Flare apply to the owner and operator of the U.S. Steel Zug Island facility.

(1) SO2 emission limits. (i) Beginning on the effective date of the FIP, no owner or operator shall emit SO2 from the following units in excess of the following limits:

(ii) Beginning two years after the effective date of the FIP, no owner or operator shall emit SO2 from Boilerhouse 2 in excess of the following limits:

(A) Boilerhouse 2 shall emit less than 750.00 lbs/hr unless Boilerhouse 1, A1 Blast Furnace, B2 Blast Furnace, D4 Blast Furnace, A/B Blast Furnace Flares, or D Furnace Flare is operating, in which case it shall emit less than 81.00 lbs/hr.

(B) [Reserved]

(2) Stack restrictions and permit requirements. (i) The owner or operator shall construct a stack for Boilerhouse 2. The stack emission point must be at least 170 feet above ground level. The owner or operator shall submit a construction permit application for the stack to the State of Michigan within 90 days of the effective date of the FIP. Where any compliance obligation under this section requires any other state or local permits or approvals, the owner or operator shall submit timely and complete applications and take all other actions necessary to obtain all such permits or approvals.

(ii) Beginning two years after the effective date of the FIP, no owner or operator shall emit SO2 from Boilerhouse 2, except from the stack emission point at least 170 feet above ground level.

(3) Monitoring requirements. (i) Not later than two years after the effective date of the FIP, the owner or operator shall install and continuously operate an SO2 continuous emission monitoring system (CEMS) to measure SO2 emissions from Boilerhouse 2 in conformance with 40 CFR part 60, appendix F procedure 1.

(ii) The owner or operator shall determine SO2 emissions from Boilerhouse 1, Hot Strip Mill Slab Reheat Furnaces 1-5, No. 2 Baghouse, Main Plant Boiler No. 8, Main Plan Boiler No. 9, A1 Blast Furnace, B2 Blast Furnace, D4 Blast Furnace, A/B Blast Furnace Flares, and D Furnace Flare using mass balance calculations as described in paragraph (b)(4) of this section.

(iii) Within 180 days of the installation of the CEMS specified in paragraph (b)(3)(i) of this section, the owner or operator shall perform an initial compliance test for SO2 emissions from Boilerhouse 2 while the boilerhouse is operating in accordance with the applicable emission limit during the period of testing identified in paragraph (b)(1)(ii) of this section. The initial compliance test shall be performed using EPA Test Method 6 at 40 CFR part 60, appendix A-4.

(4) Compliance assurance plan. To determine compliance with the limits in paragraph (b)(1)(i) of this section, the owner or operator shall calculate hourly SO2 emissions using all raw material sulfur charged into each affected emission unit and assume 100 percent conversion of total sulfur to SO2. The owner or operator shall implement a compliance assurance plan (CAP) for all units except Boilerhouse 2 and any idled units that shall specify the calculation methodology, procedures, and inputs used in these calculations and submit the plan to EPA within 30 days after the effective date of the FIP. The owner or operator must submit a list of idled units to EPA within 30 days of the effective date of the FIP. The owner or operator must submit a CAP for any idled units prior to resuming operations.

(5) Recordkeeping. The owner/operator shall maintain the following records continuously for five years beginning on the effective date of the FIP:

(i) All records of production for each affected emission unit.

(ii) All records of hourly emissions calculated in accordance with the CAP.

(iii) In accordance with paragraphs (b)(3) of this section, all CEMS data, including the date, place, and time of sampling or measurement; parameters sampled or measured; and results.

(iv) Records of quality assurance and quality control activities for emission monitoring systems including, but not limited to, any records required by 40 CFR part 60, appendix F Procedure 1.

(v) Records of all major maintenance activities performed on emission units, air pollution control equipment, CEMS, and other production measurement devices.

(vi) Any other records required by the Quality Assurance Requirements for Gas Continuous Emission Monitoring Systems Used for Compliance Determination rule at 40 CFR part 60, appendix F Procedure 1 or the National Emission Standards for Hazardous Air Pollutants for Integrated Iron and Steel Manufacturing Facilities rule at 40 CFR part 63, subpart FFFFF.

(6) Reporting. Beginning on the effective date of the FIP, all reports under this section shall be submitted quarterly to Compliance Tracker, Air Enforcement and Compliance Assurance Branch, U.S. Environmental Protection Agency, Region 5, Mail Code AE-17J, 77 W. Jackson Blvd., Chicago, IL 60604-3590.

(i) The owner or operator shall submit a CAP in accordance with paragraph (b)(4) of this section within 30 days of the effective date of the FIP.

(ii) The owner or operator shall report CEMS data and hourly mass balance calculations quarterly in accordance with CEMS requirements in paragraph (b)(3) of this section and the CAP requirements set forth in paragraph (b)(4) of this section no later than the 30th day following the end of each calendar quarter.

(iii) The owner or operator shall report the results of the initial compliance test for the Boilerhouse 2 stack within 60 days of conducting the test.

(iv) The owner or operator shall submit quarterly excess emissions reports for all units identified in paragraphs (b)(1)(i) and (ii) of this section no later than the 30th day following the end of each calendar quarter. Excess emissions means emissions that exceed the emission limits specified in paragraph (b)(1) of this section. The reports shall include the magnitude, date(s), and duration of each period of excess emissions, specific identification of each period of excess emissions that occurs during all periods of operation including startups, shutdowns, and malfunctions of the unit, the nature and cause of any malfunction (if known), and the corrective action taken, or preventative measures adopted.

(v) The owner or operator of each unit shall submit quarterly CEMS performance reports, to include dates and duration of each period during which the CEMS was inoperative (except for zero and span adjustments and calibration checks), reason(s) why the CEMS was inoperative and steps taken to prevent recurrence, and any CEMS repairs or adjustments no later than the 30th day following the end of each calendar quarter.

(vi) The owner or operator shall also submit results of any CEMS performance tests required by 40 CFR part 60, appendix F, Procedure 1 (e.g., Relative Accuracy Test Audits, Relative Accuracy Audits, and Cylinder Gas Audits) no later than 30 days after the test is performed.

(vii) When no excess emissions have occurred or the CEMS has not been inoperative, repaired, or adjusted during the reporting period, such information shall be stated in the quarterly reports required by paragraphs (b)(6) of this section.

(c) This section addresses and satisfies CAA section 172 requirements for the Detroit SO2 nonattainment area by specifying the necessary emission limits and other control measures applicable to the EES Coke facility. This section applies to the owner and operator of the facility located at 1400 Zug Island Road in Detroit, Michigan.

(1) SO2 emission limits. Beginning on the effective date of the FIP, no owner or operator shall emit SO2 from the Underfire Combustion Stack EUCoke-Battery in excess of 544.6 lbs/hr, as a 3-hour average, and 2071 tons per year, on a 12-month rolling basis as determined at the end of each calendar month, and 0.702 pounds per 1000 standard cubic feet of coke oven gas, as a 1-hour average.

(2) Monitoring requirements. The owner or operator shall maintain and operate in a satisfactory manner a device to monitor and record the SO2 emissions from the Underfire Combustion Stack EUCoke-Battery on a continuous basis. The owner or operator shall use Continuous Emission Rate Monitoring (CERM) data for determining compliance with the hourly limit in paragraph (c)(1) of this section. The owner or operator shall operate the CERM system in conformance with 40 CFR part 60, appendix F.

(d) This section addresses and satisfies CAA section 172 requirements for the Detroit SO2 nonattainment area by specifying the necessary emission limits and other control measures applicable to the Cleveland-Cliffs Steel Corporation (formerly AK or Severstal Steel) facility. This section applies to the owner and operator of the facility located at 4001 Miller Road in Dearborn, Michigan.

(1) SO2 emission limits. Beginning on the effective date of the FIP, no owner or operator shall emit SO2 from the following units in excess of the following limits:

(2) Monitoring requirements. The owner or operator shall maintain and operate in a satisfactory manner a device to monitor and record the SO2 emissions and flow from “B” Blast Furnace and “C” Blast Furnace Baghouse and Stove Stacks on a continuous basis. The owner or operator shall use CERM data for determining compliance with the hourly limits in paragraph (d)(1) of this section. The owner or operator shall operate the CERM system in conformance with 40 CFR part 60, appendix F.

(e) This section addresses and satisfies CAA section 172 requirements for the Detroit SO2 nonattainment area by specifying the necessary emission limits and other control measures applicable to the Dearborn Industrial Generation (DIG) facility. This section applies to the owner and operator of the facility located at 2400 Miller Road in Dearborn, Michigan.

(1) SO2 emission limits. (i) Beginning on the effective date of the FIP, no owner or operator shall emit SO2 from the following units in excess of the following limits:

(ii) [Reserved]

(2) Monitoring requirements. (i) The owner or operator shall maintain and operate in a satisfactory manner a device to monitor and record the SO2 emissions from Boilers 1, 2, and 3 on a continuous basis. Installation and operation of each CEMS shall meet the timelines, requirements and reporting detailed in 40 CFR part 60, appendix F. If the owner or operator chooses to use a Predictive Emissions Monitoring System (PEMS) in lieu of a CEMS to monitor SO2 emissions, the permittee shall follow the protocol delineated in Performance Specification 16 in appendix B of 40 CFR part 60.

(ii) The owner or operator shall verify compliance with the emission limits for Boilers 1, 2 and 3 and Flares 1 and 2 (combined) by following the procedures and methodologies contained in the document entitled “Protocol for Demonstrating Continuous Compliance with the Emission Limitations of ROP MI-ROP-N6631-2004” dated May 31, 2011, or subsequent revisions to this document approved by EPA.

[87 FR 61528, Oct. 12, 2022]

(a) This section identifies the original “Air Implementation Plan for the State of Michigan” and all revisions submitted by Michigan that were federally approved prior to August 1, 2006.

(b) The plan was officially submitted on February 3, 1972.

(c) The plan revisions listed below were submitted on the dates specified.

(1) Re-evaluation of control strategies for Berrien and Ingham Counties were submitted on March 3, 1972, by the State Air Pollution Office.

(2) Amendments to the Michigan air pollution rules for the control of SO2 emissions (Part 3) and the prevention of air pollution episodes (Part 6) submitted by the Governor on March 30, 1972.

(3) An amendment to the Grand Rapids air pollution ordinance (section 9.35 and section 9.36) was submitted on May 4, 1972, by the Grand Rapids Department of Environmental Protection.

(4) Reasons and justifications concerning general requirements of control strategy for nitrogen dioxide, compliance schedules, and review of new sources and modifications submitted on July 12, 1972, by the Governor.

(5) A letter from the State Department of Public Health submitted on July 24, 1972, described how emissions data would be made available to the public.

(6) Compliance schedules were submitted by the State of Michigan, Department of Natural Resources on February 16, 1973.

(7) Compliance schedules were submitted by the State of Michigan, Department of Natural Resources on May 4, 1973.

(8) Compliance schedules were submitted by the State of Michigan, Department of Natural Resources on September 19, 1973.

(9) Compliance schedules were submitted by the State of Michigan, Department of Natural Resources on October 23, 1973.

(10) Compliance schedules were submitted by the State of Michigan, Department of Natural Resources on December 13, 1973.

(11) Air Quality Maintenance Area identifications were submitted on June 27, 1974, by the State of Michigan Department of Natural Resources.

(12) Air Quality Maintenance Area identifications were submitted on October 18, 1974, by the State of Michigan Department of Natural Resources.

(13) Provisions to disapprove an installation permit if the applicant source would interfere with the attainment or maintenance of national air quality standards were submitted by the Governor on January 25, 1974.

(14) Order extending the final compliance dates for meeting the sulfur dioxide emission limitation was submitted by the Michigan Department of Natural Resources for the Karn, Weadock and Cobb Plant Units of the Consumers Power Co.

(15) Order extending compliance date for meeting the sulfur dioxide emission limitation was submitted by the State of Michigan Department of Natural Resources for the Detroit Edison Company, Monroe County Plant on December 12, 1977.

(16) On April 25, 1979, the State submitted its nonattainment area plan for areas designated nonattainment as of March 3, 1978 and as revised on October 5, 1978. This submittal contained Michigan's Part D attainment plans for particulate matter, carbon monoxide, sulfur dioxide, transportation and new source review, plus a copy of Michigan's existing and proposed regulations. USEPA is not taking action at this time to include in the federally approved SIP certain portions of the submittal: Provisions in R 336.1310 concerning open burning; 336.1331, insofar as it may pertain to process sources in the iron and steel category and site specific revisions; 1349, 1350, 1351, 1352, 1353, 1354, 1355, 1356 and 1357 as they pertain to specific iron and steel source operations; Part 5, Extension of Sulfur Dioxide Compliance Date for Power Plants Past January 1, 1980; Part 7, Emission Limitations and Prohibitions—New Sources of Volatile Organic Compound Emissions; R336.1701-1710 controlling minor sources of volatile organic compounds; Part 11, Continuous Emission Monitoring; Part 13, Air Pollution Episodes; Part 16, Organization and Procedures; and Part 17, Hearings.

(17) On October 12, 1979, the State submitted comments and commitments in response to USEPA's notice of proposed rulemaking.

(18) On January 9, 1980, the State submitted a copy of the finally adopted rules of the Commission. These rules became fully effective on January 18, 1980. These finally adopted rules are identical to the rules submitted on April 25, 1979, as part of Michigan's Part D nonattainment area plan except for a modification in the numbering system. Paragraph (c)(16) of this subpart identifies those rules on which USEPA has not taken action.

(19) On February 6, 1980, the State submitted the visible emission test method for stationary sources referenced in Rule 336.1303 as being on file with the Michigan Air Pollution Control Commission. On March 7, 1980, the State submitted clarifications to the visible emissions test method.

(20) On March 31, 1980, the State submitted revisions to the conditional approval schedules for total suspended particulates.

(21) On July 25, 1979, the State submitted the official ozone attainment plan as part of the State Implementation Plan.

(22) On October 26, 1979, the State submitted comments and revisions to the transportation plans and vehicle inspection/maintenance portions of the State Implementation Plan for ozone in response to USEPA's notice of proposed rulemaking (45 FR 47350).

(23) On November 8, 1979, the State submitted revisions to the ozone attainment plan.

(24) On December 26, 1979, the State submitted comments and additional information from the lead local agencies on the transportation control plans for the Flint, Lansing, Grand Rapids and Detroit urban areas.

(25) On May 12, 1980, the State submitted corrections and comments in response to USEPA's notice of proposed rulemaking (45 FR 25087).

(26) On March 20, 1980, the State submitted commitments and additional revisions to the Inspection/Maintenance program for the Detroit urban area.

(27) On February 23, 1979, compliance schedules were submitted by the State of Michigan, Department of Natural Resources to USEPA for the Detroit Edison, St. Clair Power Plant. Additional material concerning the Final Order issued to the Detroit Edison, St. Clair Power Plant was submitted on June 17, 1979 and August 14, 1979.

(28) On August 22, 1979, the State of Michigan submitted to USEPA an Administrative Order, for the Lansing Board of Water and Light (Order No. 4-1979, adopted May 23, 1979). In letters dated February 13, 1980 and April 1, 1980, the State of Michigan withdrew certain paragraphs (sections A, B, C1, D, E, F, and G) of the Order from consideration by USEPA.

(29) Compliance schedules were submitted by the State of Michigan, Department of Natural Resources to USEPA on October 26, 1979, for the Dundee Cement Company, Monroe County (Michigan Final Order, APC No. 08-1979, adopted October 17, 1979).

(30) On July 26, 1979, the State of Michigan submitted to USEPA a revision to Rule 336.49 for the Consumers Power Company's J. H. Campbell Plant. The revision is a Final Order (No. 05-1979) extending the compliance date until January 1, 1985 for the Campbell Plant to meet the sulfur dioxide emission limitations in Rule 336.49. On February 14, 1980, the State of Michigan submitted to USEPA an amendment to Order No. 05-1979.

(31) Compliance schedules were submitted by the State of Michigan, Department of Natural Resources to USEPA on November 13, 1979, for the S. D. Warren Company, Muskegon County (Michigan Final Order, No. 09-1979, adopted October 31, 1979).

(32) On December 19, 1979, the State of Michigan submitted a revision to provide for modification of the existing air quality surveillance network.

(33) On December 10, 1979, the State of Michigan submitted to USEPA a Final Order (APC No. 6-1979) issued by the Michigan Air Pollution Control Commission to the Consumers Power Company B.C. Cobb Plant. The Order requires the source to utilize 2.5% sulfur on an annual basis until January 1, 1985 when the company must meet the sulfur dioxide (SO2) emission limitation in Michigan Rule 336.1401.

(34) On January 8, 1980, the State of Michigan submitted to USEPA a Final Order (APC No. 14-1979) requested of the Michigan Air Pollution Control Commission (MAPCC) by the Union Camp Corporation in Monroe County, Michigan. The Order permitted the Union Camp Corporation to burn 2.7% sulfur fuel on an annual average and 4.0% sulfur fuel on a daily average between January 1, 1980 and July 1, 1980. Beginning July 1, 1980 until July 1, 1982 the Company is permitted to burn 2.5% sulfur fuel on an annual average and 4.0% sulfur fuel daily average. Beginning July 1, 1982 until January 1, 1985, the Company is allowed to burn 2.2% sulfur fuel annual average and 3.5% sulfur fuel daily average. After January 1, 1985; the Company has agreed to comply with the SO2 emission limitations of 1.5% sulfur fuel required in Michigan Rule 336.1401.

(35) On August 4, 1980 and August 8, 1980, the State of Michigan submitted to EPA additional information on the transportation control plan for the Niles, Michigan urbanized area.

(36) On January 10, 1980, the State of Michigan submitted to USEPA a Final Order (APC No. 16-1979) issued by the Michigan Air Pollution Control Commission to the Northern Michigan Electric Cooperative Advance Steam Plant. The Order allows the source to continue burning 2.0% sulfur coal (maximum daily average) until January 1, 1985 when the Company must meet the sulfur dioxide (S02) emission limitations in Michigan Rule 336.1401.

(37) On November 26, 1980, the State submitted a schedule to correct plan deficiencies cited by USEPA in its September 9, 1980 notice of proposed rulemaking on a portion of Michigan's Part D TSP control strategy pertaining to iron and steel sources. On April 1, 1981, the State submitted a revised schedule. USEPA has not taken action on the schedule submitted by the State.

(38) On April 10, 1981 the Governor of Michigan committed to annually administer and submit the questionnaire developed for the purposes of section 128.

(39) On July 28, 1980, the State of Michigan submitted to EPA, as revisions to the Michigan SIP, amendments to Rules 283 and 610 of the Michigan Air Pollution Control Commission.

(40) Revised compliance schedules were submitted by the State of Michigan, Department of Natural Resources (MDNR) to EPA on January 14, 1981, for the Dundee Cement Company, Monroe County (Michigan Final Order, APC No. 16—1980, adopted November 19, 1980). The revised Order provides an earlier final compliance date of December 31, 1980 for reducing the particulate matter emissions to 0.20 pounds per 1,000 pounds of exhaust gases and December 31, 1981 for visible emission reductions from the Company's cement kilns.

(41) On April 25, 1979, the State submitted materials which satisfy the intergovernmental consultation process.

(42) On July 28, 1980, the State submitted an amendment to Michigan Air Pollution Control Commission Rule 221 which exempts minor sources of particulate matter and sulfur dioxide from the offset requirements.

(43) On August 25, 1981, the State of Michigan, Department of Natural Resources (MDNR), submitted to EPA Consent Order No. 16-1981 for the Marathon Oil Company in Muskegon County. Consent Order No. 16-1981 satisfies USEPA's conditional approval of R336.1603 by providing detailed compliance schedules containing the increments of progress required by 40 CFR 51.15.

(44) On September 1, 1981, the State of Michigan, Department of Natural Resources (MDNR) submitted to USEPA a revision to its R336.1220 requiring offsets in ozone nonattainment areas to exempt the same compounds listed in EPA's Federal Register of July 22, 1980 (45 FR 48941). The revised R336.1220 also allows offsets of emissions for new sources in any of the seven counties in the southeastern Michigan ozone nonattainment area to be obtained from any of those counties, not just the county in which the new source is locating (Wayne, Oakland, Macomb, St. Clair, Washtenaw, Livingston, and Monroe).

(45) On May 24, 1980, the State of Michigan, Department of Natural Resources (MDNR) submitted Consent Order APC No. 10-1979 for the Buick Motor Division Complex (BMDC) of the Buick Motors Division, General Motors Corporation. The BMDC is located in the City of Flint, Genesee County, a primary nonattainment area. On December 2, 1980, supplementary information was submitted by MDNR. The Consent Order contains enforceable emission limitations and control measures for the attainment of the primary TSP standards in Genesee County by December 31, 1982.

(46) On July 17, 1980, the State of Michigan, Department of Natural Resources (MDNR) submitted Consent Order APC No. 01-1980 for the Grey Iron Casting Plant and the Nodular Iron Casting Plant, of the Chevrolet Motor Division, General Motors Corporation. The two plants are located in Saginaw County, a primary nonattainment area. On September 5, 1980 and February 6, 1981, supplementary information was submitted by MDNR. The Consent Order contains enforceable emission limitations and control measures for the attainment of the primary TSP standards in Saginaw County by December 31, 1982.

(47) On March 4, 1981, the State of Michigan, Department of Natural Resources (MDNR) submitted Consent Order APC No. 12-1980 for the New Haven Foundry located in Macomb County, a secondary nonattainment area. The Consent Order contains enforceable emission reductions to achieve the secondary TSP standards by June 30, 1985.

(48) On May 1, 1981, the State of Michigan, through the Department of Natural Resources, submitted Consent Order 07-1981 for the Detroit Edison Company, Boulevard Heating Plant located in the City of Detroit, Wayne County. Under Michigan Rule 336.1331(1)(a), the plant was restricted to a particulate emission limit of 0.45 pounds of particulate per 1000 pounds flue gas or an equivalent of 410 tons per year. The Consent Order, pursuant to Michigan Rule 333.1331(1)(d), establishes a new limitation for the Boulevard Plant of 0.65 pounds per 1000 pounds of flue gas with a daily limit of 0.9 tons per day and 10 tons per year.

Pursuant to the provisions of 5 U.S.C. 605(b), the Administrator certified on January 27, 1981 (46 FR 8709) that the attached rule will not have a significant economic impact on a substantial number of small entities.

(49) On March 7, 1980 and April 21, 1981 the State of Michigan submitted particulate studies for the Detroit area. These studies satisfy EPA's conditional approval and the State's commitment.

(50) On October 22, 1981, the State of Michigan submitted as a SIP revision Consent Order No. 17-1981, between Conoco, Inc., and the Michigan Air Pollution Control Commission. The Consent Order establishes a compliance schedule for Conoco, Inc. to achieve the Volatile Organic Compounds (VOC) limitations in R336.1609 by December 31, 1982.

(51) On December 27, 1979, the State of Michigan, Department of Natural Resources (MDNR), submitted to EPA a revision to the State Implementation Plan (SIP) for Lead. On February 9, 1981, the State of Michigan submitted a letter clarifying provisions of its Lead SIP. The SIP provides for the implementation of measures for controlling lead emissions for the attainment and maintenance of the national ambient air quality standards for lead in Michigan by October 31, 1982.

(52) On June 26, 1981, the State of Michigan, Department of Natural Resources, submitted to EPA Consent Order No. 12-1981 for controlling particulate emissions from the liquid waste incinerator in Building 830 at the Dow Chemical Company's Midland plant. The Consent Order provides a schedule which establishes a final particulate emissions compliance date of October 1, 1982.

(53) On August 24, 1981, the State of Michigan, Department of Natural Resources, submitted to EPA Consent Order APC No. 19-1981 for controlling particulate emissions from Dow's West Side and South Side powerplants. On October 16, 1981, the State of Michigan submitted a letter to EPA clarifying specific sections intended for EPA's rulemaking action. All particulate emission sources at Dow must comply with various parts of Michigan's SIP by December 31, 1985. The Consent Order does not interfere with the attainment of the primary particulate NAAQS standard by December 31, 1982 or the secondary particulate NAAQS by October 1, 1984.

(54) On December 16, 1981, the State of Michigan submitted to EPA Consent Order APC No. 21-1981 for the Monitor Sugar Company. Consent Order APC No. 21-1981 provides for additional controls on its coal-fired boilers, 1, 2, 3, and 4 and establishes a final compliance date of October 15, 1982 for attaining the primary National Ambient Air Quality Standards.

(55) On January 7, 1982, the State of Michigan submitted to EPA Consent Order APC No. 23-1981 for the Traverse City Board of Light and Power. Consent Order APC No. 23-1981 limits the company's operation of its No. 1 and No. 2 coal-fired boilers after December 31, 1982; provides for additional controls on its No. 4 coal-fired boiler; and establishes a final compliance date of December 31, 1982.

(56) On September 2, 1981, the State of Michigan submitted a revision to the ozone plan consisting of RACT requirements for the control of volatile organic compound emissions from stationary industrial sources (Group II) referenced in Rules R336.1101-3, 5-9, 14-16, 18-21, 23; R336.1601, 3-4, 10, 19-27; and R336.2005.

(57) On March 3, 1982, the State of Michigan submitted a modification to its schedule for submitting by December 31, 1982 regulations developed to correct the State's deficiencies in its Part D State Implementation Plan for the attainment of the total suspended particulate air quality standards in its nonattainment areas containing iron and steel sources.

(58) On December 16, 1981, the State of Michigan submitted as a SIP revision consent order APC No. 18-1981 between General Motors Warehousing and Distribution Division and the Michigan Air Pollution Control Commission. On March 16, 1982, Michigan submitted an amendment to consent order APC No. 18-1981. The Consent Order provides a one year extension from October 15, 1982 until October 15, 1983 for the Company's No. 1 and No. 2 boilers and establishes a compliance date of October 15, 1981, for boilers 3 and 4. The Consent Order contains a schedule for compliance which specifies emission limits of 0.45 pounds of particulate per 1,000 pounds of gas as required in Michigan's rule 336.1331(c) Table 31.

(59) [Reserved]

(60) On April 5, 1982, the State of Michigan submitted Consent Order APC No. 02-1980 along with alterations to Section 5(D) of the Consent Order for the Hayes-Albion foundry in Calhoun County. The Consent Order contains control measures beyond the present requirements of Michigan's R336.1301 and R336.1331 for Total Suspended Particulate (TSP) emissions and evaluation methods for determining significant particulate emission sources from the foundry. On June 18, 1982, the State of Michigan also submitted a Fugitive Dust Control Plan and a Malfunction Abatement Plan for the Hayes-Albion foundry. On September 21, 1982, the State of Michigan formally submitted Permits 314-79 and 375-79 for the American Colloid Plant.

(61) On March 6, 1981, the State of Michigan submitted as a SIP revision general rules for fugitive dust control. These rules were approved by the Michigan Air Pollution Control Commission on January 20, 1981, and became effective at the State level on February 17, 1981. On January 25, 1982, May 3, 1982, and August 24, 1982, Michigan submitted additional information and commitments. The submittal of March 6, 1981, along with the additional information and commitments satisfies the State's commitment to submit industrial fugitive dust regulations that represent reasonably available control techniques for industrial fugitive dust sources.

(62) On July 28, 1982, the State of Michigan submitted Consent Order No. 06-1981 for the Clark Oil and Refining Corporation for volatile organic compound (VOC) emissions. This revision is a detailed compliance schedule containing increments of progress with a final compliance date of December 31, 1982 and an emission limitation of 0.7 pound of organic vapor per 1000 gallons of organic compound load.

(63) On September 8, 1982, the State of Michigan submitted as a SIP revision Consent Order No. 03-1982, between the Hydra-Matic Division, General Motors Corporation and the Michigan Air Pollution Control Commission. The Consent Order establishes a compliance schedule containing increments of progress dates and a final date of November 1, 1982 for Boiler No. 5 to comply with Michigan's R336.331.

(64) On September 21, 1982, the State of Michigan submitted as a SIP revision Consent Order No. 13-1982, between the Diamond Crystal Salt and the Michigan Air Pollution Control Commission, the Consent Order establishes a compliance schedule containing increments of progress dates and a final date of December 18, 1982 for Boiler No. 5 to comply with Michigan's R336.331.

(65) [Reserved]

(66) On September 8, 1982, the State of Michigan submitted as a State Implementation Plan (SIP) revision consent order No. 08-1982, between the General Motors, Buick Motor Division and the Michigan Air Pollution Control Commission. The Consent Order establishes a Volatile Organic Compound (VOC) emissions compliance schedule as required under Michigan's Rule 336.1603 and 336.1610, and extends the final compliance date for surface coating operations until December 31, 1987. On November 29, 1982, and March 10, 1983, the State submitted additional information.

(67) On September 8, 1982, the State of Michigan submitted Consent Order No. 09-1982, between the General Motors, Fisher Body Division and the Michigan Air Pollution Control Commission as a State Implementation Plan (SIP) revision. The Consent Order establishes a Volatile Organic Compound (VOC) emission compliance schedule as required under Michigan's Rule 336.1603 and 336.1610, and extends the compliance date for surface coating operations until December 31, 1987. On November 29, 1982, and March 10, 1983, the State submitted additional information.

(68) On September 8, 1982, the State of Michigan submitted as a State Implementation Plan (SIP) revision Consent Order No. 10-1982, between Chevrolet Truck Assembly and the Michigan Air Pollution Control Commission. The Consent Order establishes a Volatile Organic Compound (VOC) emission compliance schedule as required under Michigan's Rule 336.1603 and 336.1610, and extends the compliance date for surface coating operations until December 31, 1987. On November 29, 1982, and March 10, 1983, the State submitted additional information.

(69) On September 8, 1982, the State of Michigan submitted as a State Implementation Plan (SIP) revision Consent Order No. 11-1982, between the General Motors Fisher Body Division, Fleetwood Plant and the Michigan Air Pollution Control Commission. On March 10, 1983, the State submitted additional information for this SIP revision. The Consent Order establishes a Volatile Organic Compound (VOC) emissions compliance schedule as required under Michigan's Rules 336.1603 and 336.1610, and extends the final compliance date for surface coating operations until December 31, 1987.

(70) On September 8, 1982, the State of Michigan submitted as a State Implementation Plan (SIP) revision Consent Order No. 12-1982, between the General Motors, Cadillac Motors Car Division and the Michigan Air Pollution Control Commission. On March 10, 1983, the State submitted additional information for this SIP revision. The Consent Order establishes a Volatile Organic Compound (VOC) emission compliance schedule as required under Michigan's Rule 336.1603 and R336.1610, and extends the compliance date for surface coating operations until December 31, 1987.

(71) On September 1, 1982, the State of Michigan submitted a request to reduce the size of the ozone demonstration area for Southeast Michigan from the seven-county area of Wayne, Oakland, Macomb, Livingston, Monroe, St. Clair and Washtenaw to a three-county area consisting of Wayne, Oakland, and Macomb Counties.

(72) On November 18, 1982, the State of Michigan submitted Consent Order APC No. 06-1980, along with alterations for the General Motors Corporation (GMC) Central Foundry Division, Saginaw Malleable Iron Plant in the City of Saginaw, County of Saginaw as a revision to the Michigan SIP. Consent Order No. 06-1980, as amended, reflects an interim and final particulate emission limit more stringent than Michigan's rule 336.1331; extends the final date of compliance with Michigan's Rule 336.1301 for opacity on the oil quench facilities from December 31, 1982, to December 15, 1983, which is as expeditiously as practicable and before the July 31, 1985, attainment date for the secondary TSP NAAQS in Michigan.

(73) On June 30, 1983, the State of Michigan submitted as a State Implementation Plan (SIP) revision. Consent Order No. 4-1983 between the General Motors Corporation's Oldsmobile Division and the Michigan Air Pollution Control Commission. The Consent Order establishes a Volatile Organic Compound (VOC) emissions compliance schedule as required under Michigan's Rule 336.1603 and 336.1610, and extends the final compliance dates for prime, primer-surfacer, topcoat, and final repair operations until December 31, 1987.

(74) On June 30, 1983, the State of Michigan submitted as a State Implementation Plan (SIP) revision. Consent Order No. 5-1983, between the General Motors Corporation's Assembly Division and the Michigan Air Pollution Control Commission. The Consent Order established a Volatile Organic Compound (VOC) emission compliance schedule as required under Michigan's Rule 336.1603 and R336.1610, and provides interim compliance limits to be achieved by December 31, 1984, and extends the final compliance dates for topcoating and final repair coating operations until December 31, 1987.

(75) On October 4, 1983, the State of Michigan submitted: (1) A revised Consent Order APC No. 12-1979 between CWC Castings Division of Textron and the Michigan Air Pollution Control Commission and (2) Article 14, Section J of the Muskegon County APC Rules. Consent Order APC No. 12-1979 requires reductions of point source emissions and fugitive emissions and extends the installation schedule of specified control devices to December 31, 1984. Article 14, Section J, provides a ban on open residential and leaf burning in Muskegon County. EPA approves the additional control measures contained in Consent Order APC No. 12-1979 and the open burning ban. EPA takes no action on the overall approval of Michigan's Part D secondary nonattainment area for Muskegon County.

(76) On August 24, 1983, the State of Michigan submitted a State Implementation Plan (SIP) revision request for an extension of the compliance date for Boiler No. 2 for the General Motors Corporation Warehousing and Distribution Division, in Swartz Creek County. Consent Order No. 18-1981 extends the compliance date until October 15, 1985 for GMC to install mechanical collectors on Boiler No. 2.

(77) On March 8, 1984, the State of Michigan submitted a report which demonstrated that Rule 336.1606 contains emission limits equivalent to Reasonable Available Control Technology (RACT) for Wayne, Oakland and Macomb Counties. Therefore, USEPA remove its conditional approval of Rule 336.1606 and fully approves the State's rule.

(78) On September 6, 1984, the State of Michigan submitted a revision to the Michigan State Implementation Plan for the General Motors Corporation Buick Motor Division in the form of an Alteration of Stipulation for Entry of Consent Order and Final Order, No. 8-1982. The original Consent Order No. 8-1982 was federally approved on July 6, 1983. This alteration revises Consent Order No. 8-1982, in that it accelerates the final compliance dates for prime and prime-surfacer operations and extends an interim compliance date for topcoat operations.

(i) Incorporation by reference.

(A) State of Michigan, Air Pollution Control Commission, Alteration of Stipulation for Entry Consent Order and Final Order SIP No. 8-1983, which was approved by the Air Pollution Control Commission on April 2, 1984.

(B) Letter of September 6, 1984, from the State of Michigan, Department of Natural Resources, to EPA.

(79) On December 2, 1983, USEPA proposed to withdraw its approval of Michigan's fugitive dust regulations. On April 25, 1985, the State of Michigan submitted revised Rule 336.1371, existing Rule 336.1372, and new Rule 336.1373. However, they did not meet the requirements of Part D of section 172(b); and USEPA, therefore, withdrew its approval of these submittals, disapproved these submittals, and instituted new source restrictions for major sources in the Michigan primary Total Suspended Particulate (TSP) nonattainment areas on August 20, 1985. USEPA incorporates revised Rule 336.1371 and newly submitted Rule 336.1373 into the Michigan State Implementation Plan because they provide a framework for the development of fugitive dust control programs at the State level in Michigan. USEPA retains Rule 336.1372, which is already incorporated into the Michigan SIP, insofar as it applies to sources in TSP attainment areas. This paragraph supersedes paragraph (C)(61) of this section.

(i) Incorporation by reference.

(A) Michigan Department of Natural Resources Rules 336.1371 and 336.1373 (Fugitive Dust Regulations), as adopted on April 23, 1985.

(80) On July 27, 1983, the State of Michigan submitted Consent Order No. 08-1983 for the General Motors Corporation Central Foundry Division's Saginaw Malleable Iron Plant, as a revision to the Michigan State Implementation Plan for Total Suspended Particulates. Consent Order No. 08-1983 amends control strategy provisions of federally approved (November 18, 1982 and August 15, 1983) Consent Order No. 06-1980 and its alteration.

(i) Incorporation by reference.

(A) Stipulation for Entry of Consent Order and Final Order No. 08-1983 for the General Motors Corporation Central Foundry Division's Saginaw Malleable Iron Plant amending Control Strategy Provisions issued June 9, 1983.

(81) On October 1, 1984, the State of Michigan submitted the Stipulation for Entry of Consent Order and Final Order, SIP No. 12-1984, between the Consumer Power Company's J.H. Campbell and the Michigan Air Pollution Control Commission as a revision to the Michigan SO2 SIP. Consent Order No. 12-1984 provides a 3-year compliance date extension (January 1, 1985, to December 31, 1987) for the J.H. Campbell Units 1 and 2 to emit SO2 at an allowable rate on a daily basis of 4.88 lbs/MMBTU in 1985, 4.78 lbs/MMBTU in 1986, and 4.68 lbs/MMBTU in 1987.

(i) Incorporation by reference.

(A) October 1, 1984, Stipulation for Entry of Consent Order and Final Order, SIP No. 12-1984, establishing interim daily average SO2 emission limitations and quarterly average limits on percent sulfur is fuel fired.

(82) The State of Michigan submitted negative declarations for several volatile organic compound source categories, as follows:

October 10, 1983—Large petroleum dry cleaners; May 17, 1985—High-density polyethylene, polypropylene, and polystyrene resin manufacturers; June 12, 1985—Synthetic organic chemical manufacturing industry sources (SOCMI) oxidation.

(i) Incorporation by reference.

(A) Letters dated October 10, 1983, May 17, 1985, and June 12, 1985, from Robert P. Miller, Chief, Air Quality Division, Michigan Department of Natural Resources. The letter dated June 12, 1985, includes pages 2-119 and 2-120 from the revised 1982 Air Quality Implementation Plan for Ozone and Carbon Monoxide in Southeast Michigan.

(83) On September 16, 1985, the State of Michigan submitted a SIP revision requesting alternate opacity limits for the Packaging Corporation of America (PCA) bark boiler. The request is in the form of a Stipulation for Entry of Consent Order and Final Order (No. 23-1984). The Consent Order contains an extended schedule for the PCA's bark boiler to comply with Michigan's Rule 336.1301.

(i) Incorporation by reference.

(A) Stipulation for Entry of Consent Order and Final Order No. 23-1984 for the Packaging Corporation of America, approved on July 8, 1985.

(84) On April 29, 1986, the State of Michigan submitted a revision to the Michigan State Implementation Plan (SIP) for total suspended particulates (TSP). The revision, in the form of Air Pollution Control Act (APCA) No. 65, revises the State's 1965 APCA No. 348 contained in the TSP portion of the Michigan SIP with respect to: car ferries having the capacity to carry more than 110 motor vehicles; and coal-fired trains used in connection with tourism.

(i) Incorporation by reference.

(A) Act No. 65 of the Public Acts of 1986, as approved by the Governor of Michigan on March 30, 1986.

(85) On April 25, 1979, the State of Michigan submitted as revisions to the Air Quality Implementation Plan, Michigan Department of Natural Resources Air Pollution Control Commission General Rules for Open Burning; Continuous Emission Monitoring; Air Pollution Episodes; Organization, Operation and Procedures; and Hearings.

(i) Incorporation by reference.

(A) R 336.1310, Open Burning, effective January 18, 1980.

(B) R 336.2101-3, R 336.2150-5, R 336.336-2159, R 336.2170, R336.2175-6, R 336.2189-90, and R 336.2199; Continuous Emission Monitoring, effective January 18, 1980.

(C) R 336.2301-8, Air Pollution Episodes, effective January 18, 1980.

(D) R 336.2601-8, Organization, Operating, and Procedures, effective January 18, 1980.

(E) R 336.2701-6, Hearings, effective January 18, 1980.

(86) On May 25, 1988, the State of Michigan submitted an SIP revision in the form of an addendum to the State's Rule 336.1122, effective at the State level on May 20, 1988. The amendment will allow coating companies to exclude methyl chloroform from the VOC emission calculation when it is not technically or economically reasonable. This exemption applies only to the surface coating operations that are subject to Part 6 (Emission Limitations and Prohibitions—Existing Sources of VOC Emissions) or Part 7 (Emission Limitations and Prohibitions—New Sources of VOC Emissions) of the State's regulations.

(i) Incorporation by reference.

(A) R336.1122, Methyl Chloroform; effective at the State level on May 20, 1988.

(87)-(89) [Reserved]

(90) On December 17, 1987, the State of Michigan submitted to USEPA a revision to the Michigan State Implementation Plan for the Continental Fiber Drum, Inc., which limits volatile organic compound emissions from the surface coating operations at the facility.

(i) Incorporation by reference.

(A) State of Michigan, Air Pollution Control Commission, Stipulation for Entry of Consent Order and Final Order No. 14-1987, which was adopted by the State on December 9, 1987.

(B) Letter of December 17, 1987, from the State of Michigan, Department of Natural Resources to USEPA.

(91) On May 17, 1985, the State submitted revised rules for the control of particulate matter from iron and steel sources and from other sources in Michigan. These rules were submitted to fulfill conditions of USEPA's May 22, 1981, approval (46 FR 27923 of the State's part D total suspended particulates (TSP) State Implementation Plan (SIP). USEPA is approving these revised rules in the Michigan submittal except for the following provisions: The quench tower limit in rule 336.1331, Table 31, Section C.8, because allowing water quality limits to apply only to makeup water is a relaxation; the deletion of the limit in rule 336.1331 for coke oven coal preheater equipment, because it is a relaxation, and rule 336.1355, because it provides an unlimited exemption for emissions from emergency relief valves in coke oven gas collector mains.

(i) Incorporation by reference.

(A) Revision to parts 1, 3, and 10 of Michigan's administrative rules for air pollution control (Act 348 of 1967, as amended) as adopted by the Michigan Air Pollution Control Commission on December 18, 1984. These rules became effective in Michigan on February 22, 1985.

(92) On October 10, 1986, the State of Michigan supported portions of the revised Wayne County Air Pollution Control Division Air Pollution Control Ordinance as approved by Wayne County on September 19, 1985, as a revision to the Michigan State Implementation Plan.

(i) Incorporation by reference.

(A) Chapters 1, 2, 3, 5 (except for the portions of Chapter 5, section 501, of the Wayne County Ordinance which incorporate by reference the following parts of the State rules: The quench tower limit in Rule 336.1331, Table 31, Section C.8; the deletion of the limit in Rule 336.1331 for coke oven coal preheater equipment; and Rule 336.1355), 8 (except section 802), 9, 11, 12, 13 and appendices A and D of the Wayne County Air Pollution Control Division (WCAPCD) Air Pollution Control Ordinance as approved by WCAPCD on September 19, 1985.

(93) On November 16, 1992, the Michigan Department of Natural Resources submitted Natural Resources Commission Rule 336.202 (Rule 2), Sections 5 and 14a of the 1965 Air Pollution Act 348, and the 1991 Michigan Air Pollution Reporting Forms, Reference Tables, and General Instructions as the States emission statement program. Natural Resources Commission Rule 336.202 (Rule 2) became effective November 11, 1986. Section 5 and 14a of the 1965 Air Pollution Act 348 became effective July 23, 1965.

(i) Incorporation by reference.

(A) Natural Resources Commission Rule 336.202 (Rule 2) became effective November 11, 1986. Section 5 and 14a of the 1965 Air Pollution Act 348 became effective July 23, 1965.

(94) On November 13, 1992, January 8, 1993, and November 12, 1993, the State of Michigan submitted a Small Business Stationary Source Technical and Environmental Assistance Program for incorporation in the Michigan State Implementation Plan as required by section 507 of the Clean Air Act.

(i) Incorporation by reference.

(A) Small Business Clean Air Assistance Act, Act No. 12, Public Acts of 1993, approved by the Governor on April 1, 1993, and effective upon approval.

(95) On November 15, 1993, the State of Michigan requested revision to the Michigan State Implementation Plan (SIP) to incorporate miscellaneous technical rule changes that the State had made effective April 20, 1989.

(i) Incorporation by reference.

(A) Michigan Air Pollution Control Rules: R 336.1107 (except paragraph (c)); R 336.1121, R 336.1403. R 336.1606, R 336.1607, R 336.1608, R 336.1609, R 336.1616, R 336.1626 (deleted), and R 336.1705, effective April 20, 1989.

(96) Revisions to the Michigan Regulations submitted on June 12, 1993 and November 12, 1993 by the Michigan Department of Natural Resources:

(i) Incorporation by reference.

(A) Revisions to the following provisions of the Michigan Air Pollution Control Commission General Rules filed with the Secretary of State on April 12, 1993 and effective on April 27, 1993:

(1) R 336.1101 Definitions; A—Revised definitions of the following terms: actual emissions, air-dried coating, air quality standard, allowable emissions and alternate opacity.

(2) R 336.1103 Definitions; C—Added definition of coating category. Revised definitions of the following terms: calendar day, class II hardboard paneling finish, coating line, coating of automobiles and light-duty trucks coating of fabric, coating of large appliances, coating of paper, coating of vinyl, component, component in field gas service, component in gaseous volatile organic compound service, component in heavy liquid service, component in light liquid service, component in liquid volatile organic compound service, condenser, conveyorized vapor degreaser, and creditable.

(3) R 336.1105 Definitions; E—Added definition of the term extreme environmental conditions. Revised definitions of the following terms: electrostatic prep coat, equivalent method and extreme performance coating.

(4) R 336.1116 Definitions; P—Revised definitions of the following terms: packaging rotogravure printing, printed interior panel, process unit turnaround, publication rotogravure printing and pushside. Deleted definition of the term pneumatic rubber tire manufacturing.

(5) R 336.1122 Definitions; V—Added definition of the term vapor collection system. Revised definitions of the following terms: very large precipitator and volatile organic compound.

(6) R 336.1602 General provisions for existing sources of volatile organic compound emissions (entire rule).

(7) R 336.1610 Existing coating lines; emission of volatile organic compounds from exiting automobile, light-duty truck, and other product and material coating lines (entire rule).

(8) R 336.1611 Existing cold cleaners (entire rule).

(9) R 336.1619 Perchloroethylene; emission from existing dry cleaning equipment (entire rule).

(10) R 336.1620 Emission of volatile organic compounds from existing flat wood paneling coating lines (entire rule).

(11) R 336.1621 Emission of volatile organic compounds from existing metallic surface coating lines (entire rule).

(12) R 336.1622 Emission of volatile organic compounds from existing components of petroleum refineries; refinery monitoring program (entire rule).

(13) R 336.1623 Storage of petroleum liquids having a true vapor pressure of more than 1.0 psia, but less than 11.0 psia, in existing external floating roof stationary vessels of more than 40,000-gallon capacity (entire rule).

(14) R 336.1625 Emission of volatile organic compounds from existing equipment utilized in manufacturing synthesized pharmaceutical products (entire rule).

(15) R 336.1627 Delivery vessels; vapor collection systems (entire rule).

(16) R 336.1630 Emission of volatile organic compounds from existing paint manufacturing processes (entire rule).

(17) R 336.1631 Emission of volatile organic compounds from existing process equipment utilized in manufacture of polystyrene or other organic resins (entire rule).

(18) R 336.1632 Emission of volatile organic compounds from existing automobile, truck, and business machine plastic part coating lines (entire rule).

(19) R 336.1702 General provisions of new sources of volatile organic compound emissions (entire rule).

(20) R 336.2004 Appendix A; reference test methods; adoption of federal reference test methods (entire rule).

(21) R 336.2006 Reference test method serving as alternate version of federal reference test method 25 by incorporating Byron analysis (entire rule).

(22) R 336.2007 Alternate version of procedure L, referenced in R 336.2040(10) (entire rule).

(23) R 336.2040 Method for determination of volatile organic compound emissions from coating lines and graphic arts lines (except R 336.2040(9) and R 336.2040(10)).

(24) R 336.2041 Recordkeeping requirements for coating lines and graphic arts lines (entire rule).

(B) Revisions to the following provisions of the Michigan Air Pollution Control Commission General Rules filed with the Secretary of State on November 3, 1993 and effective on November 18, 1993:

(1) R 336.1601 Definitions—Added definition of the term person responsible.

(2) R 336.1602 General provisions for existing sources of volatile organic compound emissions—Addition of provisions requiring submittal of site-specific SIP revisions to EPA for the use of equivalent control methods allowed under rules 336.1628(1) and 336.1629(1).

(3) R 336.1624 Emission of volatile organic compounds from existing graphic arts lines (entire rule).

(4) R 336.1628 Emission of volatile organic compounds from components of existing process equipment used in manufacturing synthetic organic chemicals and polymers; monitoring program (entire rule).

(5) R 336.1629 Emission of volatile organic compounds from components of existing process equipment used in processing natural gas; monitoring program (entire rule).

(C) Senate Bill No. 726 of the State of Michigan 87th Legislature for Stage I controls signed and effective on November 13, 1993.

(D) State of Michigan, Department of Natural Resources, Stipulation for Entry of Consent Order and Final Order No. 39-1993 which was adopted by the State on November 12, 1993.

(E) State of Michigan, Department of Natural Resources, Stipulation for Entry of Consent Order and Final Order No. 40-1993 which was adopted by the State on November 12, 1993.

(F) State of Michigan, Department of Natural Resources, Stipulation for Entry of Consent Order and Final Order No. 3-1993 which was adopted by the State on June 21, 1993.

(97) On November 12, 1993, the State of Michigan submitted a revision to the State Implementation Plan (SIP) for the implementation of a motor vehicle inspection and maintenance (I/M) program in the Grand Rapids and Muskegon ozone nonattainment areas. This revision included House Bill No. 4165 which establishes an I/M program in Western Michigan, SIP narrative, and the State's Request for Proposal (RFP) for implementation of the program. House Bill No. 4165 was signed and effective on November 13, 1993.

(i) Incorporation by reference.

(A) House Bill No. 4165; signed and effective November 13, 1993.

(ii) Additional materials.

(A) SIP narrative plan titled “Motor Vehicle Emissions Inspection and Maintenance Program for Southeast Michigan, Grand Rapids MSA, and Muskegon MSA Moderate Nonattainment Areas,” submitted to the EPA on November 12, 1993.

(B) RFP, submitted along with the SIP narrative on November 12, 1993.

(C) Supplemental materials, submitted on July 19, 1994, in a letter to EPA.

(98) [Reserved]

(99) On July 13, 1994, the State of Michigan requested a revision to the Michigan State Implementation Plan (SIP). The State requested that a consent order for the Eagle-Ottawa Leather Company of Grand Haven be included in the SIP.

(i) Incorporation by reference. State of Michigan, Department of Natural Resources, Stipulation for Entry of Consent Order and Final Order No. 7-1994 which was adopted on July 13, 1994.

(100) On June 11, 1993 the Michigan Department of Natural Resources (MDNR) submitted a plan, with revisions submitted on April 7, 1994 and October 14, 1994 for the purpose of bringing about the attainment of the National Ambient Air Quality Standards for particulate matter with an aerodynamic diameter less than or equal to a nominal 10 micrometers (PM) in the Wayne County moderate PM nonattainment area.

(i) Incorporation by reference.

(A) Consent Order 4-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Allied Signal, Inc., Detroit Tar Plant.

(B) Consent Order 5-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Asphalt Products Company, Plant 5A.

(C) Consent Order 6-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Clawson Concrete Company, Plant #1.

(D) Consent Order 7-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Cummings-Moore Graphite Company.

(E) Consent Order 8-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Delray Connecting Railroad Company.

(F) Consent Order 9-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Detroit Edison Company, River Rouge Plant.

(G) Consent Order 10-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Detroit Edison Company, Sibley Quarry.

(H) Consent Order 11-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the city of Detroit, Detroit Water and Sewage Department, Wastewater Treatment Plant.

(I) Consent Order 12-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Ferrous Processing and Trading Company.

(J) Consent Order 13-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Ford Motor Company, Rouge Industrial Complex.

(K) Consent Order 14-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Ford Motor Company, Vulcan Forge.

(L) Consent Order 15-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Edward C. Levy Company, Detroit Lime Company.

(M) Consent Order 16-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Edward C. Levy Company, Plant #1.

(N) Consent Order 17-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Edward C. Levy Company, Plant #3.

(O) Consent Order 18-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Edward C. Levy Company, Plant #6.

(P) Consent Order 19-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Edward C. Levy Company, Plant 4 and 5.

(Q) Consent Order 20-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Edward C. Levy Company, Plant Scrap Up-Grade Facility.

(R) Consent Order 21-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Marblehead Lime, Brennan Avenue Plant.

(S) Consent Order 22-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Marblehead Lime, River Rouge Plant.

(T) Consent Order 23-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the McLouth Steel Company, Trenton Plant.

(U) Consent Order 24-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Michigan Foundation Company, Cement Plant.

(V) Consent Order 25-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Michigan Foundation Company, Sibley Quarry.

(W) Consent Order 26-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Morton International, Inc., Morton Salt Division.

(X) Consent Order 27-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the National Steel Corporation, Great Lakes Division.

(Y) Consent Order 28-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the National Steel Corporation, Transportation and Materials Handling Division.

(Z) Consent Order 29-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Peerless Metals Powders, Incorporated.

(AA) Consent Order 30-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Rouge Steel Company.

(BB) Consent Order 31-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Keywell Corporation.

(CC) Consent Order 32-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the St. Marys Cement Company.

(DD) Consent Order 33-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the United States Gypsum Company.

(EE) Consent Order 34-1993 effective October 12, 1994 issued by the MDNR. This Order limits the PM emissions for the Wyandotte Municipal Power Plant.

(101) On November 15, 1993, the State of Michigan submitted as a revision to the Michigan State Implementation Plan for ozone a State Implementation Plan for a motor vehicle inspection and maintenance program for the Detroit-Ann Arbor area. Michigan submitted House Bill No. 5016, signed by Governor John Engler on November 13, 1993.

(i) Incorporation by reference.

(A) State of Michigan House Bill No. 5016 signed by the Governor and effective on November 13, 1993.

(102) On November 12, 1993, the State of Michigan submitted as a revision to the Michigan State Implementation Plan for ozone a State Implementation Plan for a section 175A maintenance plan for the Detroit-Ann Arbor area as part of Michigan's request to redesignate the area from moderate nonattainment to attainment for ozone. Elements of the section 175A maintenance plan include a base year (1993 attainment year) emission inventory for NOX and VOC, a demonstration of maintenance of the ozone NAAQS with projected emission inventories (including interim years) to the year 2005 for NOX and VOC, a plan to verify continued attainment, a contingency plan, and an obligation to submit a subsequent maintenance plan revision in 8 years as required by the Clean Air Act. If the area records a violation of the ozone NAAQS (which must be confirmed by the State), Michigan will implement one or more appropriate contingency measure(s) which are contained in the contingency plan. Appropriateness of a contingency measure will be determined by an urban airshed modeling analysis. The Governor or his designee will select the contingency measure(s) to be implemented based on the analysis and the MDNR's recommendation. The menu of contingency measures includes basic motor vehicle inspection and maintenance program upgrades, Stage I vapor recovery expansion, Stage II vapor recovery, intensified RACT for degreasing operations, NOX RACT, and RVP reduction to 7.8 psi. Michigan submitted legislation or rules for basic I/M in House Bill No 5016, signed by Governor John Engler on November 13, 1993; Stage I and Stage II in Senate Bill 726 signed by Governor John Engler on November 13, 1993; and RVP reduction to 7.8 psi in House Bill 4898 signed by Governor John Engler on November 13, 1993.

(i) Incorporation by reference.

(A) State of Michigan House Bill No. 5016 signed by the Governor and effective on November 13, 1993.

(B) State of Michigan Senate Bill 726 signed by the Governor and effective on November 13, 1993.

(C) State of Michigan House Bill No. 4898 signed by the Governor and effective on November 13, 1993.

(103) On August 26, 1994 Michigan submitted a site-specific SIP revision in the form of a consent order for incorporation into the federally enforceable ozone SIP. This consent order determines Reasonably Available Control Technology (RACT) specifically for the Enamalum Corporation Novi, Michigan facility for the emission of volatile organic compounds (VOCs).

(i) Incorporation by reference. The following Michigan Stipulation for Entry of Final Order By Consent.

(A) State of Michigan, Department of Natural Resources, Stipulation for Entry of Final Order By Consent No. 6-1994 which was adopted by the State on June 27, 1994.

(104) On July 13, 1995, the Michigan Department of Natural Resources (MDNR) submitted a contingency measures plan for the Wayne County particulate matter nonattainment area.

(i) Incorporation by reference.

(A) State of Michigan Administrative Rule 374 (R 336.1374), effective July 26, 1995.

(105) [Reserved]

(106) On March 9, 1995, the State of Michigan submitted as a revision to the Michigan State Implementation Plan for ozone a State Implementation Plan for a section 175A maintenance plan for the Grand Rapids area as part of Michigan's request to redesignate the area from moderate nonattainment to attainment for ozone. Elements of the section 175A maintenance plan include an attainment emission inventory for NOX and VOC, a demonstration of maintenance of the ozone NAAQS with projected emission inventories to the year 2007 for NOX and VOC, a plan to verify continued attainment, a contingency plan, and a commitment to submit a subsequent maintenance plan revision in 8 years as required by the Clean Air Act. If a violation of the ozone NAAQS, determined not to be attributable to transport from upwind areas, is monitored, Michigan will implement one or more appropriate contingency measure(s) contained in the contingency plan. Once a violation of the ozone NAAQS is recorded, the State will notify EPA, review the data for quality assurance, and conduct a technical analysis, including an analysis of meteorological conditions leading up to and during the exceedances contributing to the violation, to determine local culpability. This preliminary analysis will be submitted to EPA and subjected to public review and comment. The State will solicit and consider EPA's technical advice and analysis before making a final determination on the cause of the violation. The Governor or his designee will select the contingency measure(s) to be implemented within six months of a monitored violation attributable to ozone and ozone precursors from the Grand Rapids area. The menu of contingency measures includes a motor vehicle inspection and maintenance program, Stage II vapor recovery, gasoline RVP reduction to 7.8 psi, RACT on major non-CTG VOC sources in the categories of coating of plastics, coating of wood furniture, and industrial cleaning solvents. Michigan submitted legislation or rules for I/M in House Bill No 4165, signed by Governor John Engler on November 13, 1993; Stage II in Senate Bill 726 signed by Governor John Engler on November 13, 1993; and RVP reduction to 7.8 psi in House Bill 4898 signed by Governor John Engler on November 13, 1993.

(i) Incorporation by reference.

(A) State of Michigan House Bill No. 4165 signed by the Governor and effective on November 13, 1993.

(B) State of Michigan Senate Bill 726 signed by the Governor and effective on November 13, 1993.

(C) State of Michigan House Bill No. 4898 signed by the Governor and effective on November 13, 1993.

(107) [Reserved]

(108) On May 16, 1996, the State of Michigan submitted a revision to the Michigan State Implementation Plan (SIP). This revision is for the purpose of establishing a gasoline Reid vapor pressure (RVP) limit of 7.8 pounds per square inch (psi) for gasoline sold in Wayne, Oakland, Macomb, Washtenaw, Livingston, St. Clair, and Monroe counties in Michigan.

(i) Incorporation by reference.

(A) House Bill No. 4898; signed and effective November 13, 1993.

(B) Michigan Complied Laws, Motor Fuels Quality Act, Chapter 290, Sections 642, 643, 645, 646, 647, and 649; all effective November 13, 1993.

(C) Michigan Complied Laws, Weights and Measures Act of 1964, Chapter 290, Sections 613, 615; all effective August 28, 1964.

(ii) Additional materials.

(A) Letter from Michigan Governor John Engler to Regional Administrator Valdas Adamkus, dated January 5, 1996.

(B) Letter from Michigan Director of Environmental Quality Russell Harding to Regional Administrator Valdas Adamkus, dated May 14, 1996.

(C) State report titled “Evaluation of Air Quality Contingency Measures for Implementation in Southeast Michigan,” submitted to the EPA on May 14, 1996.

(109) On December 13, 1994 and January 19, 1996, Michigan submitted correspondence and Executive Orders 1991-31 and 1995-18 which indicated that the executive branch of government had been reorganized. As a result of the reorganization, delegation of the Governor's authority under the Clean Air Act was revised. The Environmental Protection Agency's approval of these Executive Orders is limited to those provisions affecting air pollution control. The Air Pollution Control Commission was abolished and its authority was initially transferred to the Director of the Michigan Department of Natural Resources (DNR). Subsequently, the Michigan Department of Natural Resources of Environmental Quality (DEQ) was created by elevating eight program divisions and two program offices previously located within the DNR. The authority then earlier vested to the Director of the Michigan DNR was then transferred to the Director of the Michigan DEQ with the exception of some administrative appeals decisions.

(i) Incorporation by reference.

(A) State of Michigan Executive Order 1991-31 Commission of Natural Resources, Department of Natural Resources, Michigan Department of Natural Resources Executive Reorganization. Introductory and concluding words of issuance and Title I: General; Part A: Sections 1, 2, 4 and 5, Part B. Title III: Environmental Protection; Part A: Sections 1 and 2, Part B. Title IV: Miscellaneous; Parts A and B, Part C: Sections 1, 2, 4, Part D. Signed by John Engler, Governor, November 8, 1991. Filed with the Secretary of State November 8, 1991. Effective January 7, 1992.

(B) State of Michigan Executive Order No. 1995-18 Michigan Department of Environmental Quality, Michigan Department of Natural Resources Executive Reorganization. Introductory and concluding words of issuance. Paragraphs 1, 2, 3(a) and (g), 4, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18. Signed by John Engler, Governor, July 31, 1995. Filed with the Secretary of State on August 1, 1995. Effective September 30, 1995.

(110) A revision to Michigan's State Implementation Plan (SIP), containing part of Michigan's Natural Resources and Environmental Protection Act, was submitted by the Michigan Department of Environmental Quality (MDEQ) on May 16, 1996, and supplemented on September 23, 1997. On December 30, 1997, MDEQ withdrew much of the original submittal. The revision incorporated below contains control requirements and applicable definitions for fugitive dust sources.

(i) Incorporation by reference. The following sections of Part 55 of Act 451 of 1994, the Natural Resources and Environmental Protection Act are incorporated by reference.

(A) 324.5524 Fugitive dust sources or emissions, effective March 30, 1995.

(B) 324.5525 Definitions, effective March 30, 1995.

(111) On March 18, 1999, the State of Michigan submitted a revision to the Michigan State Implementation Plan for carbon monoxide containing a section 175A maintenance plan for the Detroit area as part of Michigan's request to redesignate the area from nonattainment to attainment for carbon monoxide. Elements of the section 175A maintenance plan include a base year (1996 attainment year) emission inventory for CO, a demonstration of maintenance of the ozone NAAQS with projected emission inventories to the year 2010, a plan to verify continued attainment, a contingency plan, and an obligation to submit a subsequent maintenance plan revision in 8 years as required by the Clean Air Act. If the area records a violation of the CO NAAQS (which must be confirmed by the State), Michigan will implement one or more appropriate contingency measure(s) which are in the contingency plan. The menu of contingency measures includes enforceable emission limitations for stationary sources, transportation control measures, or a vehicle inspection and maintenance program.

(112) The Michigan Department of Environmental Quality (MDEQ) submitted a revision to Michigan's State Implementation Plan (SIP) on August 20, 1998, and supplemented it on November 3, 1998. The revision removed from the SIP the following rules, which the State rescinded effective May 28, 1997: R 336.91 Purpose; R 336.92 Suspension of enforcement; requests by local agencies; R 336.93 Local agency requirements prior to suspension of enforcement; R 336.94 Commission public hearings on applications; R 336.95 Suspension of enforcement; procedures and public notice; R 336.96 Suspension of enforcement; conditions; R 336.97 Commission review of local agency programs; renewal of suspended enforcement; R 336.601 Affected counties and areas; R 336.602 Attainment of national ambient air quality standards; exemption from inspection and maintenance program requirements; R 336.603 Ozone and carbon monoxide attainment status determination; R 336.1373 Fugitive dust control requirements; areas listed in table 36; R 336.1501 Emission limits; extension of compliance date past January 1, 1980, generally; R 336.1502 Application; copies; R 336.1503 Application; contents; R 336.1504 Denial of request for extension past January 1, 1980; R 336.1505 Grant of extension past January 1, 1980; R 336.1506 Receipt of full and complete application; public notice; inspection; public hearing; R 336.1507 Modification or revocation of order granting extension; immediate effect; R 336.1603 Compliance program; R 336.2010 Reference test method 5A; R 336.2199(c); R 336.2601 Organization; R 336.2602 Offices and meetings; R 336.2603 Documents available for inspection and copying; R 336.2604 Document inspection and copying procedures; tape recording transcriptions; R 336.2605 Functions; R 336.2608 Hearings and informal conferences; R 336.2301 Definition of air pollution episode; R 336.2302 Definition of air pollution forecast; R 336.2303 Definition of air pollution alert; R 336.2304 Definition of air pollution warning; R 336.2305 Definition of air pollution emergency; R 336.2306 Declaration of air pollution episodes; R 336.2307 Episode emission abatement programs; and R 336.2308 Episode orders. The rules incorporated below contain revisions to degreasing, perchloroethylene dry cleaning, petroleum refinery, synthetic organic chemical manufacturing, and delivery vessel loading rules.

(i) Incorporation by reference. The following sections of the Michigan Administrative Code are incorporated by reference.

(A) R 336.1611 Existing cold cleaners, effective June 13, 1997.

(B) R336.1612 Existing open top vapor degreasers, effective June 13, 1997.

(C) R 336.1613 Existing conveyorized cold cleaners, effective June 13, 1997.

(D) R 336.1614 Existing conveyorized vapor degreasers, effective June 13, 1997.

(E) R 336.1619 Standards for perchloroethylene dry cleaning equipment, effective June 13, 1997.

(F) R 336.1622 Emission of volatile organic compounds from existing components of petroleum refineries; refinery monitoring program, effective June 13, 1997.

(G) R 336.1628 Emission of volatile organic compounds from components of existing process equipment used in manufacturing synthetic organic chemicals and polymers; monitoring program, effective June 13, 1997.

(H) R 336.1651 Standards for Degreasers, effective June 13, 1997.

(I) R 336.1706 Loading delivery vessels with organic compounds having a true vapor pressure of more than 1.5 psia at new loading facilities handling 5,000,000 or more gallons of such compounds per year, effective June 13, 1997.

(J) R 336.1707 New cold cleaners, effective June 13, 1997.

(K) R 336.1708 New open top vapor degreasers, effective June 13, 1997.

(L) R 336.1709 New conveyorized cold cleaners, effective June 13, 1997.

(M) R 336.1710 New conveyorized vapor degreasers, effective June 13, 1997.

(113) On March 9, 1995, the State of Michigan submitted a revision to the Michigan State Implementation Plan for ozone containing a section 175A maintenance plan for the Muskegon County area as part of Michigan's request to redesignate the area from nonattainment to attainment for ozone. Elements of the section 175A maintenance plan include a contingency plan, and an obligation to submit a subsequent maintenance plan revision in 8 years as required by the Clean Air Act. If the area records a violation of the 1-hour ozone NAAQS, determined not to be attributable to transport from upwind areas, Michigan will implement one or more appropriate contingency measure(s) which are in the contingency plan. The menu of contingency measures includes a motor vehicle inspection and maintenance program, stage II vapor recovery, a low Reid vapor pressure gasoline program, and rules for industrial cleanup solvents, plastic parts coating, and wood furniture coating.

(i) Incorporation by reference.

(A) State of Michigan House Bill No. 4165 signed by the Governor and effective on November 13, 1993.

(B) State of Michigan House Bill No. 726 signed by the Governor and effective on November 13, 1993.

(C) State of Michigan House Bill No. 4898 signed by the Governor and effective on November 13, 1993.

(114)-(115) [Reserved]

(116) The Michigan Department of Environmental Quality submitted revisions to Michigan's State Implementation Plan (SIP) on July 7, 2000 and supplemented them with letters dated January 29, 2001, and February 6, 2002. They include revisions to definitions, open burning rules, general volatile organic compound provisions, and administrative procedures. The revision removed from the SIP rules R 336.1320 and R 336.2703, which the State rescinded effective April 10, 2000.

(i) Incorporation by reference. The following sections of the Michigan Administrative Code are incorporated by reference.

(A) R 336.1104 Definitions; D, effective April 10, 2000.

(B) R 336.1310, Open burning, effective February 3, 1999.

(C) R 336.1602 General provisions for existing sources of volatile organic compound emissions, effective April 10, 2000.

(D) R 336.2701 Petitions for review and for contested case hearings; hearing procedure; “duly authorized agent” defined, effective April 10, 2000.

(E) R 336.2702 Appearances, effective April 10, 2000.

(117) [Reserved]

(118) The Michigan Department of Environmental Quality submitted revisions to Michigan's State Implementation Plan (SIP) on September 23, 2002. They include rules to address excess emissions occurring during startup, shutdown or malfunction as well as revisions to definitions.

(i) Incorporation by reference. The following sections of the Michigan Administrative Code are incorporated by reference.

(A) R 336.1102 Definitions; B, effective May 27, 2002.

(B) R 336.1104 Definitions; D, effective May 27, 2002.

(C) R 336.1105 Definitions; E, effective May 27, 2002.

(D) R 336.1107 Definitions; G, effective May 27, 2002.

(E) R 336.1108 Definitions; H, effective May 27, 2002.

(F) R 336.1113 Definitions; M, effective May 27, 2002.

(G) R 336.1118 Definitions; R, effective May 27, 2002.

(H) R 336.1120 Definitions; T, effective May 27, 2002.

(I) R 336.1915 Enforcement discretion in instances of excess emissions resulting from malfunction, start-up, or shutdown, effective May 27, 2002.

(J) R 336.1916 Affirmative defense for excess emissions during start-up or shutdown, effective May 27, 2002.

(119) The Michigan Department of Environmental Quality submitted a revision to Michigan's State Implementation Plan for ozone on April 25, 2003. This submittal contained a revised definition of volatile organic compound.

(i) Incorporation by reference.

(A) R 336.1122 Definitions; V, effective March 13, 2003.

(120) [Reserved]

(121) On April 3, 2003, the Michigan Department of Environmental Quality (MDEQ) submitted regulations restricting emissions of oxides of nitrogen (NOX) to address the Phase I NOX SIP Call requirements. EPA conditionally approved Michigan's April 3, 2003, SIP revision on April 16, 2004. On May 27, 2004 and August 5, 2004, Michigan subsequently submitted for EPA approval SIP revisions to address the requirements found in EPA's conditional approval. These additional submittals, in combination with the original SIP revision, fulfill the Phase I NOX SIP Call requirements.

(i) Incorporation by reference. The following sections of the Michigan Administrative Code are incorporated by reference.

(A) R336.1802 Applicability under oxides of nitrogen budget trading program, effective May 20, 2004.

(B) R336.1803 Definitions for oxides of nitrogen budget trading program, effective December 4, 2002.

(C) R336.1804 Retired unit exemption from oxides of nitrogen budget trading program, effective May 20, 2004.

(D) R336.1805 Standard requirements of oxides of nitrogen budget trading program, effective December 4, 2002.

(E) R336.1806 Computation of time under oxides of nitrogen budget trading program, effective December 4, 2002.

(F) R336.1807 Authorized account representative under oxides of nitrogen budget trading program, effective December 4, 2002.

(G) R336.1808 Permit requirements under oxides of nitrogen budget trading program, effective December 4, 2002.

(H) R336.1809 Compliance certification under oxides of nitrogen budget trading program, effective December 4, 2002.

(I) R336.1810 Allowance allocations under oxides of nitrogen budget trading program, effective December 4, 2002.

(J) R336.1811 New source set-aside under oxides of nitrogen budget trading program, effective May 20, 2004.

(K) R336.1812 Allowance tracking system and transfers under oxides of nitrogen budget trading program, effective December 4, 2002.

(L) R336.1813 Monitoring and reporting requirements under oxides of nitrogen budget trading, effective December 4, 2002.

(M) R336.1814 Individual opt-ins under oxides of nitrogen budget trading program, effective December 4, 2002.

(N) R336.1815 Allowance banking under oxides of nitrogen budget trading program, effective December 4, 2002.

(O) R336.1816 Compliance supplement pool under oxides of nitrogen budget trading program, effective December 4, 2002.

(P) R336.1817 Emission limitations and restrictions for Portland cement kilns, effective December 4, 2002.

(122) On April 3, 2003, May 28, 2003, September 17, 2004, October 25, 2004 and June 8, 2005, Michigan submitted revisions to the State Implementation Plan which affect the following sections of the Michigan Administrative Code: Part 3: Emission Limitations and Prohibitions—Particulate Matter; Part 4: Emission Limitations and Prohibitions—Sulfur-bearing Compounds; Part 6: Emission Limitations and Prohibitions—Existing Sources of Volatile Organic Compound Emissions; Part 7: Emission Limitations and Prohibitions—New Sources of Volatile Organic Compound Emissions; Part 9: Emission Limitations and Prohibitions—Miscellaneous; Part 10: Intermittent Testing and Sampling; and Part 11: Continuous Emission Monitoring.

(i) Incorporation by reference. The following sections of the Michigan Administrative Code are incorporated by reference.

(A) Revisions to the following provisions of the Michigan Administrative Code, effective April 30, 1998:

(1) R 336.1358 Roof monitor visible emissions at steel manufacturing facilities from electric arc furnaces and blast furnaces.

(2) R 336.1361 Visible emissions from blast furnace casthouse operations at steel manufacturing facilities.

(3) R 336.1362 Visible emissions from electric arc furnace operations at steel manufacturing facilities.

(4) R 336.1363 Visible emissions from argon-oxygen decarburization operations at steel manufacturing facilities.

(B) R 336.1625 Emission of volatile organic compound from existing equipment utilized in manufacturing synthesized pharmaceutical products, filed with the Secretary of State on November 14, 2000 and effective November 30, 2000.

(C) Revisions to the following provisions of the Michigan Administrative Code, filed with the Secretary of State March 11, 2002 and effective March 19, 2002:

(1) R 336.1301 Standards for density of emissions.

(2) R 336.1303 Grading visible emissions.

(3) R 336.1330 Electrostatic precipitator control systems.

(4) R 336.1331 Emission of particulate matter, except C8 of Table 31.

(5) R 336.1371 Fugitive dust control programs other than areas listed in table 36.

(6) R 336.1372 Fugitive dust control program; required activities; typical control methods.

(7) R 336.1374 Particulate matter contingency measures; area listed in table 37.

(8) R 336.1401 Emission of sulfur dioxide from power plants.

(9) R 336.1403 Oil- and natural gas-producing or transporting facilities and natural gas-processing facilities; emissions; operation.

(10) R 336.1601 Definitions.

(11) R 336.1604 Storage of organic compounds having true vapor pressure of more than 1.5 psia, but less than 11 psia, in existing fixed roof stationary vessels of more than 40,000-gallon capacity.

(12) R 336.1605 Storage of organic compounds having true vapor pressure of 11 or more psia in existing stationary vessels of more than 40,000-gallon capacity.

(13) R 336.1606 Loading gasoline into existing stationary vessels of more than 2,000-gallon capacity at dispensing facilities handling 250,000 or more gallons per year.

(14) R 336.1607 Loading gasoline into existing stationary vessels of more than 2,000-gallon capacity at loading facilities.

(15) R 336.1608 Loading gasoline into delivery vessels at existing loading facilities handling less than 5,000,000 gallons per year.

(16) R 336.1615 Existing vacuum-producing systems at petroleum refineries.

(17) R 336.1616 Process unit turnarounds at petroleum refineries.

(18) R 336.1617 Existing organic compound-water separators at petroleum refineries.

(19) R 336.1618 Use of cutback paving asphalt.

(20) R 336.1619 Standards for perchloroethylene dry cleaning equipment; adoption of standards by reference.

(21) R 336.1622 Emission of volatile organic compounds from existing components of petroleum refineries; refinery monitoring program.

(22) R 336.1623 Storage of petroleum liquids having a true vapor pressure of more than 1.0 psia, but less than 11.0 psia, in existing external floating roof stationary vessels of more than 40,000-gallon capacity.

(23) R 336.1627 Delivery vessels; vapor collection systems.

(24) R 336.1628 Emission of volatile organic compounds from components of existing process equipment used in manufacturing synthetic organic chemicals and polymers; monitoring program.

(25) R 336.1629 Emission of volatile organic compounds from components of existing process equipment used in processing natural gas; monitoring program.

(26) R 336.1630 Emission of volatile organic compounds from existing paint manufacturing processes.

(27) R 336.1631 Emission of volatile organic compounds from existing process equipment utilized in manufacture of polystyrene or other organic resins.

(28) R 336.1702 New sources of volatile organic compound emissions generally.

(29) R 336.1705 Loading gasoline into delivery vessels at new loading facilities handling less than 5,000,000 gallons per year.

(30) R 336.1906 Diluting and concealing emissions.

(31) R 336.1911 Malfunction abatement plans.

(32) R 336.1930 Emission of carbon monoxide from ferrous cupola operations.

(33) R 336.2001 Performance tests by owner.

(34) R 336.2002 Performance tests by department.

(35) R 336.2003 Performance test criteria.

(36) R 336.2004 Appendix A; reference test methods; adoption of Federal reference test methods.

(37) R 336.2005 Reference test methods for delivery vessels.

(38) R 336.2007 Alternate version of procedure L, referenced in R 336.2040(10).

(39) R 336.2013 Reference test method 5D.

(40) R 336.2021 Figures.

(41) R 336.2040 Method for determination of volatile organic compound emissions from coating lines and graphic arts lines, except subrules (9) and (10).

(42) R 336.2101 Continuous emission monitoring, fossil fuel-fired steam generators.

(43) R 336.2150 Performance specifications for continuous emission monitoring systems.

(44) R 336.2155 Monitor location for continuous emission monitoring systems.

(45) R 336.2159 Alternative continuous emission monitoring systems.

(46) R 336.2170 Monitoring data reporting and recordkeeping.

(47) R 336.2189 Alternative data reporting or reduction procedures.

(48) R 336.2190 Monitoring system malfunctions.

(D) Revisions to the following provisions of the Michigan Administrative Code, effective October 15, 2004:

(1) R 336.2012 Reference test method 5C.

(2) R 336.2014 Reference test method 5E.

(3) R 336.2175 Data reduction procedures for fossil fuel-fired steam generators.

(E) R 336.2011 Reference test method 5B, filed with the Secretary of State on April 21, 2005 and effective April 29, 2005.

[37 FR 10873, May 31, 1972. Redesignated at 71 FR 52469, Sept. 6, 2006] Editorial Note:For Federal Register citations affecting § 52.1190, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.