The provisions of this subpart are applicable to discharges resulting from the manufacture of luminescent materials.
The definitions in 40 CFR part 401 and the chemical analysis methods in 40 CFR part 136 apply to this subpart. In addition,
(a) The term “luminescent materials” shall mean materials that emit light upon excitation by such energy sources as photons, electrons, applied voltage, chemical reactions or mechanical energy and which are specifically used as coatings in fluorescent lamps and cathode ray tubes. Luminescent materials include, but are not limited to, calcium halophosphate, yttrium oxide, zinc sulfide, and zinc-cadmium sulfide.
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
| Pollutant or pollutant property
| Maximum for any 1 day
| Monthly average shall not exceed
|
|---|
| | Milligrams per liter (mg/l)
|
| pH | (
1) | (
1)
|
| Cadmium | 0.55 | 0.26
|
| Antimony | 0.10 | 0.04
|
| Zinc | 1.64 | 0.67
|
| Fluoride | 35.0 | 18.0
|
| TSS | 60.0 | 31.0
|
Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources (PSNS):
| Pollutant property
| For any 1 day
| Monthly average shall not exceed
|
|---|
| | Milligrams per liter (mg/l)
|
| Cadmium | 0.55 | 0.26
|
| Antimony | 0.10 | 0.04
|
| Zinc | 1.64 | 0.67
|
| Fluoride | 35.0 | 18.0 |
authority: Secs. 301, 304, 306, 307, 308, and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977,
33 U.S.C. 1311,
1314,
1316,
1317,
1318,
and; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217, unless otherwise noted
source: 48 FR 15394, Apr. 8, 1983, unless otherwise noted.
cite as: 40 CFR 469.41