Certain material is incorporated by reference into this subpart with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. All approved incorporation by reference (IBR) material is available for inspection at the U.S. Environmental Protection Agency (EPA) and at the National Archives and Records Administration (NARA). Contact the EPA at: EPA Docket Center, Public Reading Room, EPA WJC West, Room 3334, 1301 Constitution Ave. NW, Washington, DC; phone: (202) 566-1744. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email [email protected]. The material may be obtained from the following sources:

(a) ASTM, International (ASTM), 100 Barr Harbor Drive, P.O. Box CB700, West Conshohocken, Pennsylvania 19428-2959; phone: (800) 262-1373; website: www.astm.org.

(1) ASTM Method D523-08, Standard Test Method for Specular Gloss (June 1, 2008), IBR approved for § 59.508(c).

(2) ASTM Method D523-89 (Reapproved 1999), Standard Test Method for Specular Gloss (May 10, 1999), IBR approved for table 3 of appendix A to subpart E of part 59.

(b) California Air Resources Board (CARB), 1001 I Street, P.O. Box 2815, Sacramento, CA 95812-2815, Telephone (916) 327-0900, www.arb.ca.gov.

(1) California Air Resources Board Method 310—Determination of Volatile Organic Compounds (VOC) in Consumer Products and Reactive Organic Compounds in Aerosol Coating Products (May 25, 2018) (CARB Method 310 (2018)), IBR approved for §§ 59.505(c) and 59.508(a).

(2) California Air Resources Board Method 310—Determination of Volatile Organic Compounds (VOC) in Consumer Products and Reactive Organic Compounds in Aerosol Coating Products (May 5, 2005) (CARB Method 310 (2005)), IBR approved for table 3 of appendix A to subpart E of part 59.

(c) South Coast Air Quality Management District (SCAQMD), 21865 Copley Dr, Diamond Bar, CA 91765, Telephone (909-396-2000), www.aqmd.gov.

(1) South Coast Air Quality Management District Test Method 318-95, Determination of Weight Percent Elemental Metal in Coatings by X-ray Diffraction, (July, 1996) (SCAQMD Test Method 318-95), IBR approved for § 59.508(b) and table 3 of appendix A to subpart E of part 59.

(2) [Reserved]