1. On 08/06/2019, Commerce published in the Federal Register its initiation of the countervailing duty investigation of utility scale wind towers from Canada (84 FR 38216). The effective date of this initiation is 07/29/2019 (the applicable date stated in the FR notice).

2. The merchandise covered by this investigation consists of certain wind towers, whether or not tapered, and sections thereof. Certain wind towers support the nacelle and rotor blades in a wind turbine with a minimum rated electrical power generation capacity in excess of 100 kilowatts and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle (i.e., where the top of the tower and nacelle are joined) when fully assembled.

A wind tower section consists of, at a minimum, multiple steel plates rolled into cylindrical or conical shapes and welded together (or otherwise attached) to form a steel shell, regardless of coating, end-finish, painting, treatment, or method of manufacture, and with or without flanges, doors, or internal or external components (e.g., flooring/decking, ladders, lifts, electrical buss boxes, electrical cabling, conduit, cable harness for nacelle generator, interior lighting, tool and storage lockers) attached to the wind tower section. Several wind tower sections are normally required to form a completed wind tower.

Wind towers and sections thereof are included within the scope whether or not they are joined with nonsubject merchandise, such as nacelles or rotor blades, and whether or not they have internal or external components attached to the subject merchandise.

Specifically excluded from the scope are nacelles and rotor blades, regardless of whether they are attached to the wind tower. Also excluded are any internal or external components which are not attached to the wind towers or sections thereof, unless those components are shipped with the tower sections.

Further, excluded from the scope of the antidumping duty investigation are any products covered by the existing antidumping duty order on utility scale wind towers from the Socialist Republic of Vietnam. See Utility Scale Wind Towers from the Socialist Republic of Vietnam: Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order, 78 FR 11150 (February 15, 2013).

Merchandise covered by this investigation is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheading 7308.20.0020 or 8502.31.0000. Wind towers of iron or steel are classified under HTSUS 7308.20.0020 when imported separately as a tower or tower section(s). Wind towers may be classified under HTSUS 8502.31.0000 when imported as combination goods with a wind turbine (i.e., accompanying nacelles and/or rotor blades). While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the investigation is dispositive.

3. This proceeding has been assigned case number C-122-868.

4. If there are any questions by the importing public regarding this message, please contact the Call Center for the Office of AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce at (202) 482-0984. CBP ports should submit their inquiries through authorized CBP channels only. (This message was generated by OVI: MYS.)

5. There are no restrictions on the release of this information.

Alexander Amdur