1. On 02/06/2017, Commerce published in the Federal Register its amended final determination and antidumping duty order on large residential washers (LRWs) from the People's Republic of China (82 FR 9371). This message amends certain instructions pertaining to the final determination in this proceeding. See, message 6350302, dated 12/15/2016.

2. The products covered by this order are all large residential washers and certain parts thereof from the People's Republic of China. For purposes of this order, the term “large residential washers” denotes all automatic clothes washing machines, regardless of the orientation of the rotational axis, with a cabinet width (measured from its widest point) of at least 24.5 inches (62.23 cm) and no more than 32.0 inches (81.28 cm), except as noted below.

Also covered are certain parts used in large residential washers, namely: (1) all cabinets, or portions thereof, designed for use in large residential washers; (2) all assembled tubs designed for use in large residential washers which incorporate, at a minimum: (a) a tub; and (b) a seal; (3) all assembled baskets designed for use in large residential washers which incorporate, at a minimum: (a) a side wrapper; (b) a base; and (c) a drive hub; and (4) any combination of the foregoing parts or subassemblies.

Excluded from the scope are stacked washer-dryers and commercial washers. The term “stacked washer-dryers” denotes distinct washing and drying machines that are built on a unitary frame and share a common console that controls both the washer and the dryer. The term “commercial washer” denotes an automatic clothes washing machine designed for the “pay per use” segment meeting either of the following two definitions:

(1) (a) it contains payment system electronics; (b) it is configured with an externally mounted steel frame at least six inches high that is designed to house a coin/token operated payment system (whether or not the actual coin/token operated payment system is installed at the time of importation); (c) it contains a push button user interface with a maximum of six manually selectable wash cycle settings, with no ability of the end user to otherwise modify water temperature, water level, or spin speed for a selected wash cycle setting; and (d) the console containing the user interface is made of steel and is assembled with security fasteners; or
(2) (a) it contains payment system electronics; (b) the payment system electronics are enabled (whether or not the payment acceptance device has been installed at the time of importation) such that, in normal operation, the unit cannot begin a wash cycle without first receiving a signal from a bona fide payment acceptance device such as an electronic credit card reader; (c) it contains a push button user interface with a maximum of six manually selectable wash cycle settings, with no ability of the end user to otherwise modify water temperature, water level, or spin speed for a selected wash cycle setting; and (d) the console containing the user interface is made of steel and is assembled with security fasteners.

Also excluded from the scope are automatic clothes washing machines that meet all of the following conditions: (1) have a vertical rotational axis; (2) are top loading; (3) have a drive train consisting, inter alia, of (a) a permanent split capacitor (PSC) motor, (b) a belt drive, and (c) a flat wrap spring clutch.

Also excluded from the scope are automatic clothes washing machines that meet all of the following conditions: (1) have a horizontal rotational axis; (2) are front loading; and (3) have a drive train consisting, inter alia, of (a) a controlled induction motor (CIM), and (b) a belt drive.

Also excluded from the scope are automatic clothes washing machines that meet all of the following conditions: (1) have a horizontal rotational axis; (2) are front loading; and (3) have cabinet width (measured from its widest point) of more than 28.5 inches (72.39 cm).

The products subject to this order are currently classifiable under subheadings 8450.20.0040 and 8450.20.0080 of the Harmonized Tariff Schedule of the United States (HTSUS). Products subject to this order may also enter under HTSUS subheadings 8450.11.0040, 8450.11.0080, 8450.90.2000, and 8450.90.6000. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to this order is dispositive.

3. For imports of large residential washers from the People's Republic of China, CBP shall continue to suspend liquidation of entries of subject merchandise entered, or withdrawn from warehouse, for consumption on or after 02/03/2017 (the date on which the International Trade Commission published its final determination in the Federal Register). Effective 02/03/2017, CBP shall require a cash deposit equal to the percentages for the exporter/producer combinations identified below.

Exporter: PRC-Wide Entity
Case Number: A-570-033-000
Cash Deposit: 49.72 percent

Exporter: Nanjing LG-Panda Appliances Co., Ltd./LG Electronics, Inc.
Producer: Nanjing LG-Panda Appliances Co., Ltd.
Case Number: A-570-033-001
Cash Deposit: 38.43 percent

Note to CBP: LG Electronics, Inc. was inadvertently omitted from the exporter information in message 6350302, dated 12/15/2016.

Exporter: Suzhou Samsung Electronics Co., Ltd./Suzhou Samsung Electronics Co. Ltd. – Export/Samsung Electronics Co., Ltd.
Producer: Suzhou Samsung Electronics Co., Ltd./Suzhou Samsung Electronics Co. Ltd. – Export
Case Number: A-570-033-002
Cash Deposit: 57.37 percent

Note to CBP: Samsung Electronics Co., Ltd. was inadvertently omitted from the exporter information in message 6350302, dated 12/15/2016.

4. If there are any questions by the importing public regarding this message, please contact the Call Center for the Office of AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce at (202) 482-0984. CBP ports should submit their inquiries through authorized CBP channels only. (This message was generated by O8:BS)

5. There are no restrictions on the release of this information.

Alexander Amdur