1. This is a correction to message 5104402, dated 4/14/2025, to correct the header and the RE line, and paragraph 3 of that message. 2. The header, RE line and paragraph 3 contain an incorrect case number (C-570-204) for this investigation. The case number of this investigation (C-570-208) was corrected in the Federal Register (90 FR 21455). The header and RE line are corrected above and below is the fully corrected message. 3. On 04/14/2025, Commerce published in the Federal Register its initiation of the countervailing duty investigation of polypropylene corrugated boxes from the People's Republic of China (90 FR 15555). The effective date of this initiation is 04/07/2025 (the applicable date stated in the FR notice). 4. The merchandise covered by this investigation is polypropylene corrugated boxes. Polypropylene corrugated boxes are boxes, bins, totes, or other load-bearing containers made for holding goods, that are made of corrugated polypropylene sheets, also known as polypropylene hollow core sheets, polypropylene fluted sheets, polypropylene twin wall sheets, or multi wall sheets. Such polypropylene sheets are "corrugated," "fluted," or "hollow core," meaning the inside of the sheet contains channels or pockets of air which make the sheets lightweight, while retaining strength and durability. Polypropylene corrugated boxes are typically produced from a plastic resin consisting of 50 percent or more polypropylene. Polypropylene corrugated boxes are covered by the scope irrespective of the particular mix of polypropylene homo-polymer, polypropylene co-polymer, recycled or virgin polypropylene, or ancillary chemicals such as electrostatic agents or flame retardants. Polypropylene corrugated boxes are formed by corrugated polypropylene sheets cut to length, die-cut into specific box shapes, and may be cut or scored to allow each side of the box to be folded into shape. Polypropylene corrugated boxes may include a tab or attached portion of polypropylene corrugated sheet (commonly referred to as a "manufacturer's joint") that has been cut, slotted, or scored to facilitate the formation of the box by stapling, gluing, welding, or taping the sides together to form a tight seal. One-piece polypropylene corrugated boxes are die-cut or otherwise formed so that the top, bottom, and sides form a single, contiguous unit. Two-piece polypropylene corrugated boxes are those with a folded bottom and a folded top as separate pieces. Multi-piece polypropylene corrugated boxes are those with separate bottoms and tops that are fitted to a single folded piece comprising the sides of the box. Polypropylene corrugated boxes may be printed with ink or digital designs. The subject merchandise includes polypropylene corrugated boxes with or without handles, with or without lids or tops, with or without reinforcing wire, whether in a one-piece, two-piece, or multi-piece configuration, and whether folded into shape or in an unfolded form. The subject merchandise includes all polypropylene corrugated boxes regardless of size, shape, or dimension. The subject merchandise also includes polypropylene corrugated box lids or tops when imported separately from polypropylene corrugated boxes. The products subject to this investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under statistical reporting number 3923.10.9000. Although the HTSUS statistical reporting number is provided for convenience and customs purposes, the written description of the merchandise is dispositive. 5. This proceeding has been assigned case number C-570-208. 6. If there are any questions by the importing public regarding this message, please contact the Call Center for the Office of AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce at (202) 482-0984. CBP ports should submit their inquiries through authorized CBP channels only. (This message was generated by OIII:PZ.) 7. There are no restrictions on the release of this information. Alexander Amdur