CLA 2-RR:NC:62:360 G88376
Ms. Abbie Kwan
TAK LEI SI
Av. Venceslau De Morais 11,
12 Andar A&B Edif. Ind. Kin. IP
Macau
RE: Classification and country of origin determination for women’s woven dresses and jackets; 19 CFR 102.21(c)(4); most important assembly or manufacturing process
Dear Ms Kwan:
This is in reply to your letter dated March 13, 2001 requesting a classification and country of origin determination for a women’s woven jacket and dress which will be imported into the United States.
FACTS:
The subject merchandise consists of a women’s woven dress and matching jacket which will be imported under style number 499631/599631. The garments are constructed from 75% rayon and 25% polyester woven fabric and each has a lining that is made from 100% polyester woven fabric. The ankle length, sleeveless dress features spaghetti straps approximately ¼ inch wide and beading on the front. The garment has a shaped front neckline and is cut straight across the rear top edge from side seam to side seam. The bolero styled jacket features short sleeves, shoulder pads, an unsecured front opening, a straight lapel and beading on the front panels.
The manufacturing operations for the garments are as follows:
ORIGIN OF COMPONENTS
Korea
shell fabric is formed
China
lining fabric is formed
II. MANUFACTURING STEPS
China (Part1)
Jacket
fabric is cut into components
front facing (lapel)sewn at center front
interlining sewn at rear neckline
sleeves are sewn with shell and lining
main label sewn on back panel of lining
Dress
fabric is cut into components
main label sewn on back panel of lining
components joined to form back panel of shell and lining
spaghetti straps sewn on top edge of back shell
B. Macau
Jacket
front and back panels of shell are joined at shoulder and side seams
front and back panels of lining are joined at shoulder and side seams
sleeves are joined with armhole
country of origin, care and size labels are sewn to lining
Dress
front and back panels of shell and lining are joined at the side seams
spaghetti straps sewn to top edge of front shell
care/size/country of origin label sewn on back panel of lining
China (Part 2)
Jacket
shell and lining are joined at bottom and neck
beading sewn on front
shoulder pad sewn
Dress
shell and lining are joined by sewing top edge of dress
beading is sewn on front
hem of shell and lining sewn
Jacket and Dress
hangtag attached
final inspection
packing
ISSUE:
What are the classification and country of origin of the subject merchandise?
CLASSIFICATION:
The applicable subheading for the jacket of style 499631/599631 will be 6204.39.3010 Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for women’s or girls’ suit-type jackets of artificial fibers. The rate of duty will be 27.8 percent ad valorem. The applicable subheading for the dress of style 499631/599631 will be 6204.44.4010, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for women’s or girls’ dresses of artificial fibers. The rate of duty will be 16.3 percent ad valorem.
The jacket of style 499631/599631falls within textile category designation 635; the dress falls within textile category designation 636. The designated textile and apparel categories and their quota and visa status are the result of international agreements that are subject to frequent renegotiations and changes. To obtain the most current information, we suggest that you check, close to the time of shipment, the U.S. Customs Service Textile Status Report, an internal issuance of the U.S. Customs Service, which is available at the Customs Web Site at WWW.CUSTOMS.USTREAS.GOV. In addition, the designated textile and apparel categories may be subdivided into parts. If so, visa and quota requirements applicable to the subject merchandise may be affected and should also be verified at the time of shipment.
COUNTRY OF ORIGIN - LAW AND ANALYSIS:
On December 8, 1994, the President signed into law the Uruguay Round Agreements Act. Section 334 of that Act (codified at 19 U.S.C. 3592) provides new rules of origin for textiles and apparel entered, or withdrawn from warehouse, for consumption, on and after July 1, 1996. On September 5, 1995, Customs published Section 102.21, Customs Regulations, in the Federal Register, implementing Section 334 (60 FR 46188). Thus, effective July 1, 1996, the country of origin of a textile or apparel product shall be determined by sequential application of the general rules set forth in paragraphs (c)(1) through (5) of Section 102.21.
Paragraph (c)(1) states that "The country of origin of a textile or apparel product is the single country, territory, or insular possession in which the good was wholly obtained or produced." As the subject merchandise is not wholly obtained or produced in a single country, territory or insular possession, paragraph (c)(1) of Section 102.21 is inapplicable.
Paragraph (c)(2) states that "Where the country of origin of a textile or apparel product cannot be determined under paragraph (c)(1) of this section, the country of origin of the good is the single country, territory, or insular possession in which each of the foreign materials incorporated in that good underwent an applicable change in tariff classification, and/or met any other requirement, specified for the good in paragraph (e) of this section:"
Paragraph (e) in pertinent part states that "The following rules shall apply for purposes of determining the country of origin of a textile or apparel product under paragraph (c)(2) of this section":
HTSUS Tariff shift and/or other requirements
if the good consists of two or more component parts,
a change to an assembled good of heading 6201 through
6208 from unassembled components, provided that the
change is the result of the good being wholly assembled
in a single country, territory, or insular possession.
Accordingly, as the subject merchandise undergoes assembly operations in both China and Macau, it does not qualify as “wholly assembled” in a single country. As such, Section 102.21(c)(2) is inapplicable.
Section 102.21(c)(3) states that, "Where the country of origin of a textile or apparel product cannot be determined under paragraph (c)(1) or (2) of this section":
(i) If the good was knit to shape, the country of origin of the good is the single country, territory, or insular possession in which the good was knit; or
(ii) Except for goods of heading 5609, 5807, 5811, 6213, 6214, 6301 through 6306, and 6308, and subheadings 6209.20.5040, 6307.10, 6307.90, and 9404.90, if the good was not knit to shape and the good was wholly assembled in a single country, territory, or insular possession, the country of origin of the good is the country, territory, or insular possession in which the good was wholly assembled.
As the subject merchandise is neither knit, nor wholly assembled in a single country, Section 102.21 (c)(3) is inapplicable.
Section 102.21 (c)(4) states, "Where the country of origin of a textile or apparel product cannot be determined under paragraph (c)(1), (2) or (3) of this section, the country of origin of the good is the single country, territory or insular possession in which the most important assembly or manufacturing process occurred".
In the case of the subject merchandise, for the jacket, the joining of the front and back panels of the shell at the side and shoulder seams and the joining the sleeves to the body of the jacket constitute the most important assembly processes. For the dress, the joining of the front and back panels of the shell at the side seams constitute the most important assembly processes. Accordingly, the country of origin of the garments is Macau.
HOLDING:
The country of origin of style 499631/599631 is Macau. Based upon international textile trade agreements products of Macau are subject to quota and the requirement of a visa.
The holding set forth above applies only to the specific factual situation and merchandise identified in the ruling request. This position is clearly set forth in section 19 CFR 177.9(b)(1). This sections states that a ruling letter, either directly, by reference, or by implication, is accurate and complete in every material respect.
This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). Should it be subsequently determined that the information furnished is not complete and does not comply with 19 CFR 177.9(b)(1), the ruling will be subject to modification or revocation. In the event there is a change in the facts previously furnished, this may affect the determination of country of origin. Accordingly, if there is any change in the facts submitted to Customs, it is recommended that a new ruling request be submitted in accordance with 19 CFR 177.2.
A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Patricia Schiazzano at 212-637-7080.
Sincerely,
Robert B. Swierupski
Director,
National Commodity
Specialist Division