CLA-2-84:OT:RR:NC:N1:103
Amie Riley
DSV Air & Sea Inc.
2363 East Perry Road, Suite 191
Plainfield, IN 46168
RE: The tariff classification of a plasma coating system from Switzerland
Dear Ms. Riley:
In your letter dated September 21, 2026, you requested a tariff classification ruling on behalf of your client,
DOT America, Inc.
The merchandise under consideration is referred to as the Medicoat AG vacuum plasma spray (VPS) coating
system and is described as a system for spraying powdered feedstocks onto substrates such as orthopedic and
dental implant components. The system is designed to spray metal or cermet feedstocks composed of
titanium alloys, commercially pure titanium, and hydroxyapatite. Its main components include a vacuum
chamber housing both a fixture equipped with planetary drives and a plasmatron (a specialized plasma spray
torch) held by a robotic arm that manipulates it around the workpiece. Using an electric arc, the plasmatron
produces a high-temperature, high-velocity plasma jet that simultaneously melts and sprays the powdered
feedstock onto the substrate to apply a uniform coating.
Additional system components include a vacuum system for creating the atmospheric environment, a gas
regulation system, a powder feeder system, a cooling system, electrical supply cabinets, control cabinets, and
filtering systems. All components will be interconnected by piping and imported in a single shipment.
You suggest that the subject VPS coating system is classifiable in heading 8515, Harmonized Tariff Schedule
of the United States (HTSUS), which provides for “Electric (including electrically heated gas), laser or other
light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding
machines and apparatus, whether or not capable of cutting; electric machines and apparatus for hot spraying
of metals or cermets; parts thereof.” We agree. When imported together in a single shipment, the machines
comprising the VPS coating system are intended to contribute together to the spraying of metals or cermets,
and are to be classified as one functional unit in accordance with Note 4 to Section XVI, HTSUS.
The applicable subheading for the Medicoat AG VPS coating system will be 8515.80.0080, HTSUS, which
provides for “Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic,
electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whether
or not capable of cutting; electric machines and apparatus for hot spraying of metals or cermets; parts thereof:
Other machines and apparatus: Other.” The general rate of duty will be free.
Merchandise is to be classified according to its condition as imported. Should the requirements of 19 CFR §
141.51 and 19 CFR § 141.58 not be met, each component of the system would be separately classified in its
own respective heading.
Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS
and the accompanying duty rates are provided at https://hts.usitc.gov/.
This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other
charges, which may apply to the goods discussed herein. This includes, but is not limited to, tariffs and other
duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the
classification stated above, the merchandise covered by this ruling may also need to be reported with either
the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions
covering exceptions to such tariffs.
For further information to assist with the importation process, please refer to the frequently updated Cargo
Systems Messaging Service (CSMS) messages at
https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and the Trade Remedies page at
https://www.cbp.gov/trade/programs-administration/trade-remedies.
The holding set forth above applies only to the specific factual situation and merchandise description as
identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations
(CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the
information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and
complete in every material respect. In the event that the facts are modified in any way, or if the goods do not
conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and
Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2.
Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic
verification by CBP.
This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection
Regulations (19 C.F.R. 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents
filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact
National Import Specialist Paul Huang at [email protected].
Sincerely,
(for)
James P. Forkan
Director
National Commodity Specialist Division