CLA-2-44:OT:RR:NC:N5:130
Ms. Éveline Cantin-Bergeron
Bergé Atelier
382 Rue Dolbeau
Québec, QC G1S2R3
Canada
RE: The tariff classification of a handmade weaving board from Canada
Dear Ms. Cantin-Bergeron:
In your letter, dated September 15, 2026, you requested a binding tariff classification ruling on a handmade
weaving board. Product information and photos were submitted for our review.
The product under consideration is a weaving board. The board measures approximately 12 inches by 12
inches. It is made of plywood with holes at regular intervals. Small metal pins are inserted into the holes to
form the limits for warp and weft yarns. The user is to weave fabric back and forth between the pins. The
weaving board has no mechanized, motorized, or electrical components.
In your letter, you suggest that the weaving board is classifiable under heading 8446, Harmonized Tariff
Schedule of the United States (HTSUS), which provides for weaving machines. We disagree. Heading 8446,
HTSUS, would not be appropriate for the subject article as Chapter 84 covers various machines and
apparatus containing moving parts or mechanisms that do work. The subject article is not a machine loom or
a manual hand loom, both of which use mechanical components (e.g. warp beams, shuttles, pedals, etc.) to
weave cloth and textiles. The subject article has no moving parts or mechanisms but rather is a static flat
device with pins. Therefore, the weaving board will be classified according to its constituent material.
The weaving board consists of wood and metal components that are classified in different headings. The
weaving board is a composite good in accordance with General Rule of Interpretation (GRI) 3(b). The
Explanatory Notes (ENs) to the Harmonized System for GRI 3(b) state that “the factor which determines
essential character will vary between different kinds of goods. It may for example, be determined by the
nature of the materials or components, its bulk, quantity, weight or value, or by the role of a constituent
material in relation to the use of the goods.” When the essential character of a composite good can be
determined, the whole product is classified as if it consisted only of the material or component that imparts
the essential character to the composite good.
The wood board dictates the limits and use of the metal pins. The wood also comprises most of the bulk of
the weaving board. Therefore, the wooden board imparts the essential character of the weaving board unit.
The applicable subheading for the weaving board will be 4421.99.9880, HTSUS, which provides for Other
articles of wood: Other: Other: Other: Other: Other. The general rate of duty will be 3.3 percent ad valorem.
This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other
charges, which may apply to the goods discussed herein. This includes, but is not limited to, tariffs and other
duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the
classification stated above, the merchandise covered by this ruling may also need to be reported with either
the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions
covering exceptions to such tariffs.
For further information to assist with the importation process, please refer to the frequently updated Cargo
Systems Messaging Service (CSMS) messages at
https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and the Trade Remedies page at
https://www.cbp.gov/trade/programs-administration/trade-remedies.
The holding set forth above applies only to the specific factual situation and merchandise description as
identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations
(CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the
information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and
complete in every material respect. In the event that the facts are modified in any way, or if the goods do not
conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and
Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2.
Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic
verification by CBP.
This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection
Regulations (19 C.F.R. 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents
filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact
National Import Specialist Laurel Duvall at [email protected].
Sincerely,
(for)
James P. Forkan
Director
National Commodity Specialist Division