CLA-2-90:OT:RR:NC:N1:105
Evelyn Suarez
The Suarez Firm PLLC
5523 Sherier Pl NW
Washington, DC 20016
RE: The tariff classification of an automated body scanner from Spain
Dear Ms. Suarez:
In your letter dated September 10, 2026, on behalf of your client, Sanne NY1, LLC, you requested a tariff
classification ruling. Descriptive literature was provided for our review.
The item under consideration is described as an automated retail capsule (ARC), which is a dome-shaped,
walk-in aluminum structure designed for use in retail environments. The ARC functions as a controlled
environment for measuring a customer’s body dimensions to facilitate the production of made-to-measure
clothing. The interior features two changing rooms and a central body-scanning room equipped with a TG3D
Scanatic360 body scanner. This scanner utilizes infrared, structured-light sensor technology to capture a
full-body 3D scan in approximately three seconds, generating over 250 individual body measurements.
Following the scanning process, the customer’s measurements are automatically linked to their profile. The
system then selects the optimal pattern based on the product type and transmits the data to the company’s
manufacturing portal for production. The exterior of the ARC features two “Proto Luma” multi-touch
holographic displays, which provide a high-fidelity interface for 3D product visualization, virtual garment
try-on, and checkout. The unit also includes a ventilation system, an intercom system, soft interior lighting,
and interior finishing. The ARC is imported unassembled and measures approximately 18 feet in length by
11.5 feet in height and weighs 3.5 tons.
In your letter, you suggest the applicable subheading of the automated body scanner to be 9031.80.8085,
Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Measuring or checking
instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors;
parts and accessories thereof: Other instruments, appliances and machines: Other: Other.” We disagree. The
scanner utilizes optical technology (infrared structured light sensors and cameras) to perform its primary
function. Under Chapter 90 Additional U.S. Note 3, an instrument is defined as an “optical instrument” if it
incorporates optical elements (like lenses, mirrors, or laser/light sensors) that are essential to the primary
function of the machine. The Scanatic360 uses 18 optical sensors to map millions of 3D data points. Because
these optical components are the core method of measurement, the machine must be classified as an optical
device.
Accordingly, the applicable subheading for the automated body scanner will be 9031.49.9000, HTSUS,
which provides for “Measuring or checking instruments, appliances and machines, not specified or included
elsewhere in this chapter; profile projectors; parts and accessories thereof: Other optical instruments and
appliances: Other.” The general rate of duty will be free.
The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience
and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided
at https://hts.usitc.gov/.
This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other
charges, which may apply to the goods discussed herein. This includes, but is not limited to, tariffs and other
duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the
classification stated above, the merchandise covered by this ruling may also need to be reported with either
the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions
covering exceptions to such tariffs.
For further information to assist with the importation process, please refer to the frequently updated Cargo
Systems Messaging Service (CSMS) messages at
https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and the Trade Remedies page at
https://www.cbp.gov/trade/programs-administration/trade-remedies.
The holding set forth above applies only to the specific factual situation and merchandise description as
identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations
(CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the
information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and
complete in every material respect. In the event that the facts are modified in any way, or if the goods do not
conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and
Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2.
Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic
verification by CBP.
This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection
Regulations (19 C.F.R. 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents
filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact
National Import Specialist Jason Christie at [email protected].
Sincerely,
(for)
James P. Forkan
Director
National Commodity Specialist Division