CLA-2-87OT:RR:NC:N2:206
Piljae Seong
Hyundai-Wia
153, Jeongdong-ro, Seongsan-gu
Changwon 51533
South Korea
RE: The tariff classification of an automotive shim from South Korea
Dear Piljae Seong:
In your letter dated September 8, 2026, you requested a tariff classification ruling.
The merchandise under consideration is identified as an an automotive shim, Part Number 530404G100. The
subject article is a precision, ring-shaped component manufactured from SK5 high-carbon tool steel. It
measures approximately 33 mm in inner diameter, 51 mm in outer diameter, and 1.86 mm in thickness. The
shim is designed for use in the differential carrier assembly of a motor vehicle.
The shim is installed between the drive pinion gear and the inner pinion bearing. Within the differential
assembly, it adjusts the mounting depth and relative position of the drive pinion gear in relation to the ring
gear. The shim also controls axial clearance and assists in maintaining the proper preload of the inner pinion
bearing. These functions promote proper gear engagement and rotational stability within the differential
assembly.
The applicable subheading for the automotive shim, Part Number 530404G100, will be 8708.50.8900,
Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Parts and accessories of the
motor vehicles of headings 8701 to 8705: Drive-axles with differential, whether or not provided with other
transmission components, and non-driving axles; parts thereof: Parts: For vehicles of heading 8703: Other:
Other.” The general rate of duty will be 2.5 percent ad valorem.
The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience
and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided
at https://hts.usitc.gov/.
This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other
charges, which may apply to the goods discussed herein. This includes, but is not limited to, tariffs and other
duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the
classification stated above, the merchandise covered by this ruling may also need to be reported with either
the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions
covering exceptions to such tariffs.
For further information to assist with the importation process, please refer to the frequently updated Cargo
Systems Messaging Service (CSMS) messages at
https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and the Trade Remedies page at
https://www.cbp.gov/trade/programs-administration/trade-remedies.
The holding set forth above applies only to the specific factual situation and merchandise description as
identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations
(CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the
information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and
complete in every material respect. In the event that the facts are modified in any way, or if the goods do not
conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and
Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2.
Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic
verification by CBP.
This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection
Regulations (19 C.F.R. 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents
filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact
National Import Specialist Liana Alvarez at [email protected].
Sincerely,
(for)
James P. Forkan
Director
National Commodity Specialist Division