OT:RR:NC:N3:136
Brett Harris
Roll & Harris LLP
2121 Avenue of the Stars, Suite 800
Los Angeles, CA 90067
RE: The country of origin of helium gas in non-refillable steel tanks
Dear Mr. Harris:
In your letter dated August 27, 2026, on behalf of your client, Unique Industries, Inc., you requested a
country of origin ruling on helium gas in non-refillable steel tanks.
In your submission, the subject product is described as helium gas in non-refillable steel tanks. The helium
gas will be imported in three different capacities: 20CT, 30CT and 50CT.
The imported products will be manufactured under one of the following scenarios:
• Helium produced in Russia, Oman, or Tanzania will be shipped to China. In China, the helium will be
filled into non-reusable Chinese origin steel cylinders. The filled tank will be packaged for retail sale and
exported to the U.S.
• Helium produced in Russia, Oman, or Tanzania will be shipped to another country (e.g., the United
Kingdom, a European Union country, Vietnam, Malaysia, Thailand, Indonesia, Canada, Mexico or the
United Arab Emirates). In these countries, the helium will be filled into non-reusable Chinese origin steel
cylinders. The filled tank will be packaged for retail sale and exported to the U.S.
• Chinese origin non-reusable cylinders will be exported to countries where helium is produced – e.g. Russia,
Oman, or Tanzania. In these countries, the helium gas will be filled into non-reusable Chinese origin steel
cylinders. The filled tank will be packaged for retail sale and exported to the U.S.
You state that while helium is in a gaseous state under normal temperature and atmospheric pressure
conditions, in each of the above scenarios the bulk helium transported to the listed countries will be a mixture
of liquid helium and gaseous helium in a vacuum, heat-insulating, low temperature (approximately -268.9)
pressure vessel. Upon receipt at the local factories, the bulk mixture of helium will be distributed from this
original pressure vessel to other, smaller pressure vessels under normal temperature and lower pressure
conditions. This distribution process will cause the liquid helium in the mixture to be converted to a gaseous
state.
To prepare the helium for retail sale, the non-refillable steel tank is first filled with local origin atmospheric
air at a pressure of approximately 0.2-0.3 Megapascals (MPa). Helium gas (with a purity greater than
99.99%) from one of the listed countries – prepared from the bulk mixture as described above – is then added
to the tank until the pressure reaches 3.1 MPa. After cooling, the finished product contains approximately
85% helium/15% air at a pressure of approximately 2.8 MPa and a standard room temperature of 20. The
helium in each tank will be sourced from a single country of origin and will not be commingled with helium
from other countries.
Classification under the Harmonized Tariff Schedule of the United States (HTSUS) is made in accordance
with the General Rules of Interpretation (GRIs). GRI 5(b) states that, “Subject to the provisions of rule 5(a)
above, packing materials and packing containers entered with the goods therein shall be classified with the
goods if they are of a kind normally used for packing such goods. However, this provision is not binding
when such packing materials or packing containers are clearly suitable for repetitive use. The instant steel
tanks are of a kind normally used for packing helium gas and are not refillable. In accordance with GRI 5(b),
the steel tanks are packaging classifiable with the imported helium.
The applicable subheading for the helium gas filled tanks will be 2804.29.0010, HTSUS, which provides for
Hydrogen, rare gases, and other nonmetals: Rare gases: Other: Helium. The general rate of duty will be 3.7
percent ad valorem.
When determining the country of origin, the substantial transformation analysis is applicable. See, e.g.,
Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018. The test for determining whether a
substantial transformation will occur is whether an article emerges from a process with a new name,
character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v.
United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See
National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
With respect to the subject products, we have determined that the production processes described above do
not result in a substantial transformation of the bulk helium produced in Russia, Oman, or Tanzania.
Therefore, in our opinion, the country of origin for the subject helium gas in non-refillable steel tanks for
duty and marking purposes is the country where the bulk helium is produced.
In your letter you also asked about a scenario where U.S. origin helium will be admitted into a Foreign Trade
Zone (“FTZ”) in the U.S. It is not within the purview of this office to provide a ruling under the described
circumstances. To request a ruling that involves FTZ processing, please write to CBP headquarters at
[email protected].
The holding set forth above applies only to the specific factual situation and merchandise description as
identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations
(CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the
information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and
complete in every material respect. In the event that the facts are modified in any way, or if the goods do not
conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and
Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2.
Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic
verification by CBP.
This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection
Regulations (19 C.F.R. 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents
filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact
National Import Specialist Nuccio Fera at [email protected].
Sincerely,
(for)
James P. Forkan
Director
National Commodity Specialist Division