CLA-2-73:OT:RR:NC:N5:121
Eric Ziem
Ziem UG
Rehblöcken 11a
Hamburg 22359
Germany
RE: The tariff classification of a stainless-steel washer from Germany
Dear Mr. Ziem:
In your letter dated January 7, 2026, you requested a tariff classification ruling on behalf of Blackwave
GmbH.
The merchandise under consideration is described as a stainless-steel Belleville washer. This washer has a
circular shape with a central hole and uniform thickness. It has an outer diameter of 3 inches, an internal
diameter of 1.755 inches, and a thickness of .133 inches. It is designed to distribute load and reduce surface
damage when used with threaded fasteners. Belleville washers, which are made to conform to industry
standards for spring washers, are intended for use underneath a nut or screw head to maintain tension. They
are a type of lock washer.
The applicable subheading for the stainless-steel lock washer will be 7318.21.0090, Harmonized Tariff
Schedule of the United States (HTSUS), which provides for Screws, bolts, nuts, coach screws, screw hooks,
rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:
Non-threaded articles: Spring washers and other lock washers: Other. The duty rate will be 5.8% ad valorem.
The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience
and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided
at https://hts.usitc.gov/.
This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other
charges, which may apply to the goods discussed herein. This includes, but is not limited to, tariffs and other
duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the
classification stated above, the merchandise covered by this ruling may also need to be reported with either
the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions
covering exceptions to such tariffs.
For further information to assist with the importation process, please refer to the frequently updated Cargo
Systems Messaging Service (CSMS) messages at
https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and Frequently Asked Questions on
the Trade Remedy/IEEPA page at
https://www.cbp.gov/trade/programs-administration/trade-remedies/IEEPA-FAQ.
The holding set forth above applies only to the specific factual situation and merchandise description as
identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations
(CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the
information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and
complete in every material respect. In the event that the facts are modified in any way, or if the goods do not
conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and
Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2.
Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic
verification by CBP.
This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection
Regulations (19 C.F.R. 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents
filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact
National Import Specialist Jennifer Jameson at [email protected].
Sincerely,
(for)
Denise Faingar
Designated Official Performing the Duties of the Division Director
National Commodity Specialist Division