CLA-2-84:OT:RR:NC:N1:104
Dohee Jeong
Dynamic Design Co., Ltd.
12, Cheomdanyeonsin-ro 29beon-gil, Buk-gu
Gwangju 61089
South Korea
RE: The tariff classification of tire molds from South Korea
Dear Ms. Jeong:
In your letter dated November 18, 2025, you requested a tariff classification ruling.
The products in question are two molds that are used together to form rubber vehicle tires through a
compression-type molding process. The first is a tire sector mold, consisting of eight curved aluminum
segments that fit together to form the full circular tread pattern of the tire. The second is a side mold,
consisting of two cast steel segments which imprint the sidewall information onto the rubber. The molding
process involves the placement of a green tire (which is an intermediate product consisting of an uncured
“raw” tire) into the molds where a set temperature and high pressure are applied to cure and form the tire’s
final shape and imprint the tread pattern, trademark, and specification lettering on the tire. These dedicated
molds are exclusively used for tire production.
The applicable subheading for the sector mold and side mold will be 8480.71.8060, Harmonized Tariff
Schedule of the United States (HTSUS), which provides for “Molding boxes for metal foundry; mold bases;
molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber
or plastics: Molds for rubber or plastics: Injection or compression types: Other: Other: Compression type.”
The general rate of duty will be 3.1 percent ad valorem.
On March 12, 2025, Presidential Proclamation 10896 imposed additional tariffs on certain derivative iron or
steel products. Additional duties for derivative iron or steel products of 50 percent are reflected in Chapter
99, headings 9903.81.89, 9903.81.90, and 9903.81.91. Products provided by heading 9903.81.91, as well as
products of Chapter 73 provided by 9903.81.89 and 9903.81.90, will be subject to a duty of 50 percent upon
the value of the steel content. At the time of entry, you must report the Chapter 99 heading applicable to your
product classification, i.e. 9903.81.91, in addition to subheading 8480.71.8060, HTSUS. Derivative iron or
steel products processed in another country from steel articles melted and poured in the United States,
provided for in heading 9903.81.92, are not subject to the additional ad valorem duties.
Effective April 5, 2025, Executive Orders implemented “Reciprocal Tariffs.” All imported merchandise
must be reported with either the Chapter 99 provision under which the reciprocal tariff applies or one of the
Chapter 99 provisions covering exceptions to the reciprocal tariffs. At this time, products of South Korea
will be subject to an additional ad valorem rate of duty of 15 percent. For products covered by heading
9903.81.91 this additional duty applies to the non-steel content of the merchandise. At the time of entry, you
must report the Chapter 99 heading applicable to your product classification, i.e. 9903.02.56, in addition to
subheading 8480.71.8060, HTSUS, listed above.
The tariffs and additional duties cited above are current as of this ruling’s issuance. Duty rates are provided
for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying
duty rates are provided at https://hts.usitc.gov/.
The holding set forth above applies only to the specific factual situation and merchandise description as
identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations
(CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the
information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and
complete in every material respect. In the event that the facts are modified in any way, or if the goods do not
conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and
Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2.
Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic
verification by CBP.
This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection
Regulations (19 C.F.R. 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents
filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact
National Import Specialist Arthur Purcell at [email protected].
Sincerely,
(for)
Deborah Marinucci
Designated Official Performing the Duties of the Division Director
National Commodity Specialist Division