OT:RR:NC:N3:348
Lowell DeFrance
Navia USA LLC
200 North Martingale Road Suite 400
Schaumburg, IL 60513
RE: Classification and country of origin determination for 3-pc tie set; 19 CFR 102.21(c)(2); tariff shift
Dear Mr. DeFrance:
This is in reply to your letter dated August 22, 2025 written on behalf of AW Change, requesting a
classification and country of origin determination for 3-pc tie set, which will be imported into the United
States.
FACTS:
Item #1 consists of a necktie, faux pocket square and a floral textile lapel pin. Each item is constructed from
100% polyester woven fabric. The faux pocket square features a rounded puff style piece of fabric
permanently affixed to a 3” wide x 4 ½” long cardstock. The cardstock is inserted into the chest pocket of a
jacket to give the illusion of a pocket square. The lapel pin is shaped like a rosette and is affixed to a 2 ½ inch
long metal pin.
The manufacturing operations are as follows:
The polyester fabric for the necktie and faux pocket square is manufactured in China.
The polyester woven fabric for the tie’s lining is manufactured in China. The fabric is printed in
Vietnam.
In Vietnam: the fabric is cut, sewn, and assembled to create the necktie.
The faux pocket square is folded, sewn, and attached to the cardstock in Vietnam.
The fabric lapel pin is created in Vietnam from Chinese fabric.
The final packaging is cut, printed, and assembled in Vietnam.
ISSUE:
What are the classification and country of origin of the subject merchandise?
CLASSIFICATION:
Classification under the Harmonized Tariff of the United States (HTSUS) is in accordance with the General
Rules of Interpretation (GRI's). GRI 1 provides that classification is determined first in accordance with the
terms of the headings of the tariff and any relative section or chapter notes and then, if the headings and notes
do not otherwise require, in accordance with the remaining GRI's.
The necktie is covered by heading 6215, HTSUS, which includes “Ties, bow ties and cravats.” The faux pocket
square is covered by heading 6217, HTSUS, which include “Other made up clothing accessories; Other.” The
cufflinks are covered by heading 7117, HTSUS, a provision for “Imitation jewelry: Of base metal, whether or
not plated with precious metal: Cuff links and studs.” No single heading provides for all articles.
Classification cannot be determined under GRI 1.
GRI 3 provides generally for the classification of goods that appear to be classifiable under more than one
heading. GRI 3(a) provides that the more specific heading is to be preferred. However, when "two or more
headings each refer to part only of the items in a set put up for retail sale, those headings are to be regarded as
equally specific in relation to those goods." In this case different headings each refer to part only of the goods
to be classified. Thus, classification cannot be determined according to which heading is more specific.
GRI 3(b) provides that "goods put up in sets for retail sale, which cannot be classified by reference to 3(a),
shall be classified as if they consisted of the material or component which gives them their essential
character."
The Explanatory Notes (EN), the official interpretation of the HTSUS at the international level, for GRI 3(b)
provide interpretation of the terms essential character and goods put up in sets for retail sale. The EN state
that goods put up in sets for retail sale are those that:
(a) consist of at least two different articles which are, prima facie, classifiable in different headings.
(b) consist of products or articles put up together to meet a particular need or carry out a specific
activity; and
(c) are put up in a manner suitable for sale directly to users without repacking.
In this case, the goods to be classified consist of textile clothing accessories prima facie classifiable in
different headings. The necktie is classified under heading 6215, HTS and the pocket square/floral lapel pin
is classified under 6217, HTS. Although the articles are of these types are sold separately, they are put up
together here as a coordinated set to meet a particular need. These items are imported ready for direct sale
without repacking. Thus, they meet the requirements for classification as a set.
The EN state further that the factor determining which article of a set provides its essential character will
vary with different kinds of goods. It may be "the nature of the material or component, its bulk, quantity,
weight or value, or the role of a constituent material in relation to the use of the goods." With regard to the “3
pc tie set”, it is the necktie which, by its bulk, quantity, weight, value, and role provides the essential
character.
The applicable subheading for the Item #1 will be 6215.20.0000, HTSUS, which for ties, bow ties and
cravats: Of man-made fibers. The general rate of duty will be 24.8 cents/kg plus 2.7% ad valorem
COUNTRY OF ORIGIN - LAW AND ANALYSIS:
Section 334 of the Uruguay Round Agreements Act (“URAA”) (codified at 19 U.S.C. 3592), enacted on
December 8, 1994, provides the rules of origin for textiles and apparel products for purposes of the customs
laws and the administration of quantitative restrictions, unless otherwise provided by the statute, entered, or
withdrawn from warehouse, for consumption on or after July 1, 1996. Section 3592 has been described as
Congress’s expression of substantial transformation as it relates to textile and apparel products. Section
102.21 of the Code of Federal Regulations (19 CFR 102.21), implements the URAA. The country of origin of
a textile or apparel product shall be determined by the sequential application of the general rules set forth in
paragraphs (c)(1) through (5) of section 102.21. See 19 CFR 102.21(c).
Paragraph (c)(1) states, “The country of origin of a textile or apparel product is the single country, territory,
or insular possession in which the good was wholly obtained or produced.” As the subject merchandise is not
wholly obtained or produced in a single country, territory or insular possession, paragraph (c)(1) of Section
102.21 is inapplicable.
Paragraph (c)(2) states, “Where the country of origin of a textile or apparel product cannot be determined
under paragraph (c)(1) of this section, the country of origin of the good is the single country, territory, or
insular possession in which each of the foreign materials incorporated in that good underwent an applicable
change in tariff classification, and/or met any other requirement, specified for the good in paragraph (e) of
this section:”
Paragraph (e) in pertinent part states,
The following rules shall apply for purposes of determining the country of origin of a textile or
apparel product under paragraph (c)(2) of this section:
HTSUS Tariff shift and/or other requirements
6215-6217 (1) If the good consists of two or more
component parts, a change to an assembled
good of heading 6215 through 6217 from
unassembled components, provided that the
change is the result of the good being wholly
assembled in a single country, territory, or
insular possession.
Pursuant to the applicable provision of Section 102.21(e), the country of origin of Item #1 is Vietnam; the
country where they were wholly assembled
HOLDING:
The country of origin of Item #1 is Vietnam.
Effective April 5, 2025, Executive Orders implemented “Reciprocal Tariffs.” All imported merchandise
must be reported with either the Chapter 99 provision under which the reciprocal tariff applies or one of the
Chapter 99 provisions covering exceptions to the reciprocal tariffs. At this time, products of Vietnam will be
subject to an additional ad valorem rate of duty of 20 percent. At the time of entry, you must report the
Chapter 99 heading applicable to your product classification, i.e. 9903.02.69, in addition to subheading
6215.20.0000, HTSUS, listed above.
The tariffs and additional duties cited above are current as of this ruling’s issuance. Duty rates are provided
for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying
duty rates are provided at https://hts.usitc.gov/.
The holding set forth above applies only to the specific factual situation and merchandise description as
identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations
(CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the
information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and
complete in every material respect. In the event that the facts are modified in any way, or if the goods do not
conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and
Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2.
Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic
verification by CBP.
This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection
Regulations (19 C.F.R. 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents
filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact
National Import Specialist Rosemarie Hayward at [email protected].
Sincerely,
(for)
Denise Faingar
Acting Director
National Commodity Specialist Division