CLA-2-73:OT:RR:NC:N1:164
James Lin
Thinkbug LLC
4045 Five Forks Trickum Rd. SW
Suite B9 #278
Lilburn, GA 30047
RE: The tariff classification of baoding balls from China
Dear Mr. Lin:
In your letter dated July 25, 2025, you requested a tariff classification ruling regarding baoding balls from
China. Product information was submitted with your request.
The items under consideration are described as solid stainless steel boading balls intended for hand therapy
and stress relief. During use, an individual holds two baoding balls and rotates them in a circular motion. You
claim that the repetitive, rhythmic movement and weight of the balls improves hand strength, dexterity, and
blood circulation in the hand and wrist. At importation, the balls are packaged with a zippered felt bag in a
colored cardboard box, ready for retail sale. Each baoding ball is 1.5 inches in diameter. Each pair weighs
approximately one pound.
You propose classification in subheading 9019.10.2010, Harmonized Tariff Schedule of the United States
(HTSUS), which provides for Mechano-therapy appliances; massage apparatus; …parts and accessories
thereof: Mechano-therapy appliances; massage apparatus; …parts and accessories thereof: Mechano-therapy
appliances and massage apparatus; parts and accessories thereof: Mechano-therapy appliances. We disagree.
Classification under the HTSUS is in accordance with the General Rules of Interpretation (GRIs). GRI 1
provides that the classification of goods will be determined according to the terms of the headings of the
tariff schedule and any relative section or chapter notes. In the event that the goods cannot be classified solely
on the basis of GRI 1, and if the headings and legal notes do not otherwise require, the remaining GRIs 2
through 6 will then be applied in order.
The Harmonized Commodity Description and Coding System Explanatory Notes (ENs) constitute the official
interpretation of the HTSUS. While not legally binding nor dispositive, the ENs provide a commentary on the
scope of each heading of the HTSUS and are generally indicative of the proper interpretation of these
headings. See T.D. 89-80, 54 Fed. Reg. 35127 (August 23, 1989).
Of relevance, the ENs to heading 9019, HTSUS, specify that the heading covers appliances which operate by
mechanical reproduction of various movements to treat disease of the joints or muscles. Such treatment is
usually carried out under medical supervision. Based on the submitted information, the boading balls are
solid stainless steel spheres and are neither appliances nor mechanical in nature. Further, they differ in
purpose and use from the mechano-therapy appliances classified under heading 9019. Consequently, they are
not classified in heading 9019, HTSUS.
Heading 7326, HTSUS, is a residual or basket provision which covers a wide range of iron or steel articles
that are not more specifically provided for elsewhere in the HTSUS. The ENs to heading 7326 state that
“This heading covers all iron or steel articles obtained by forging or punching, by cutting or stamping or by
other processes such as folding, assembling, welding, turning, milling or perforating other than articles
included in the preceding headings of this Chapter or covered by Note 1 to Section XV or included in
Chapter 82 or 83 or more specifically covered elsewhere in the Nomenclature.” An article of iron or steel can
be classified in heading 7326 if it is determined that the item is not more specifically provided for in any
other heading of the tariff. Noting the solid stainless steel baoding balls are not more specifically provided for
in heading 9019, or any other heading of the tariff, the baoding balls can be classified in heading 7326,
HTSUS.
The applicable subheading for the solid stainless steel baoding balls will be 7326.90.8688, HTSUS, which
provides for Other articles of iron or steel: Other: Other: Other: Other. The general rate of duty will be 2.9
percent ad valorem.
Effective March 4, 2025, pursuant to U.S. Note 2(u) to Subchapter III, Chapter 99, all products of China and
Hong Kong as provided by heading 9903.01.24, HTSUS, other than products classifiable under headings
9903.01.21, 9903.01.22, and 9903.01.23, HTSUS, will be subject to an additional 20 percent ad valorem rate
of duty. At the time of entry, you must report the applicable Chapter 99 heading, i.e. 9903.01.24, in addition
to subheading 7326.90.8688, HTSUS, listed above.
On March 12, 2025, Presidential proclamation 10896 imposed additional tariffs on certain derivative iron or
steel products. Additional duties for derivative iron or steel products of 50 percent are reflected in Chapter
99, headings 9903.81.89, 9903.81.90, and 9903.81.91. Products provided by heading 9903.81.91, as well as
products of Chapter 73 provided by 9903.81.89 and 9903.81.90, will be subject to a duty of 50 percent upon
the value of the steel content. At the time of entry, you must report the Chapter 99 heading applicable to your
product classification, i.e. 9903.81.90, in addition to subheading 7326.90.8688, HTSUS. Derivative iron or
steel products processed in another country from steel articles melted and poured in the United States,
provided for in heading 9903.81.92, are not subject to the additional ad valorem duties.
Effective April 5, 2025, Executive Orders implemented “Reciprocal Tariffs.” All imported merchandise must
be reported with either the Chapter 99 provision under which the reciprocal tariff applies or one of the
Chapter 99 provisions covering exceptions to the reciprocal tariffs. At this time products from all countries
will be subject to an additional 10 percent ad valorem rate of duty. For products covered by heading
9903.81.90, this additional duty applies to the non-steel content of the merchandise. At the time of entry, you
must report the Chapter 99 heading applicable to your product classification, i.e. 9903.01.25, in addition to
subheading 7326.90.8688, HTSUS, listed above.
Pursuant to U.S. Note 20 to Subchapter III, Chapter 99, HTSUS, products of China classified under
subheading 7326.90.8688, HTSUS, unless specifically excluded, are subject to an additional 25 percent ad
valorem rate of duty. At the time of importation, you must report the Chapter 99 subheading, i.e., 9903.88. 03,
in addition to subheading 7326.90.8688, HTSUS, listed above.
The HTSUS is subject to periodic amendment, so you should exercise reasonable care in monitoring the
status of goods covered by the Note cited above and the applicable Chapter 99 subheading. For background
information regarding the trade remedy initiated pursuant to Section 301 of the Trade Act of 1974, including
information on exclusions and their effective dates, you may refer to the relevant parts of the USTR and CBP
websites, which are available at
https://ustr.gov/issue-areas/enforcement/section-301-investigations/tariff-actions and
https://www.cbp.gov/trade/programs-administration/trade-remedies, respectively.
The tariffs and additional duties cited above are current as of this ruling’s issuance. Duty rates are provided
for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying
duty rates are provided at https://hts.usitc.gov/.
The holding set forth above applies only to the specific factual situation and merchandise description as
identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations
(C.F.R.), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the
information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and
complete in every material respect. In the event that the facts are modified in any way, or if the goods do not
conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and
Border Protection (CBP) and submit a request for a new ruling in accordance with 19 C.F.R. 177.2.
Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic
verification by CBP.
This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection
Regulations (19 C.F.R. 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents
filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact
National Import Specialist Paul Taylor at [email protected].
Sincerely,
(for)
James Forkan
Acting Director
National Commodity Specialist Division