CLA-2 RR:CR:GC 964632 BB

Ms. Maria Garcia
Alcatel NA Cable Systems, Inc.
2512 Penny Road
Claremont, NC 28610

RE: Optical Fiber Cable, Individually sheathed fibers.

Dear Ms. Garcia:

This is in response to your letter of September 21, 2000, to the Customs National Commodity Specialist Division, New York, requesting a ruling on the tariff classification of optical fiber cable under the Harmonized Tariff Schedule of the United States (HTSUS). Your letter was referred to this office for reply. No samples were submitted however, product advertising materials were submitted to describe Alcatel’s “Singlemode Optical Fiber” and the types of optical fiber cables where it is used: “Loose Tube, FlexTube TM, Unitube TM, UniRibbon TM, and tight buffered cable configurations.” In preparing this ruling we also gave consideration to your undated response letter to our December 28, 2000 request for further information.

FACTS:

An optical fiber cable is composed of many strands of coated glass optical fibers. Optical fibers are extremely thin strands of ultra-pure glass designed to transmit light signals from a transmitter to a receiver. These light signals represent encoded electrical signals that include video, audio, or data information in any combination.

An optical fiber consists of three main regions. 1) The center region of the fiber is the glass core. This region actually carries the light. The optic core ranges in diameter from 9 microns to 100 microns in the most commonly used fibers. 2) Surrounding the optical fiber core is a region called the cladding. The cladding, typically, is also made of glass and has a diameter of 125 microns or 140 microns. 3) The third region of the optical fiber, includes the acrylate coating that provides protection to the individual optical fibers against microbending. Once light enters a glass fiber, the cladding layer prevents light loss as the beam of light zigzags along, inside the glass core. Glass fibers can transmit messages or images by having beams of light directed through their cores over very short or very long distances, without significant distortion. The pattern of light waves forms a code that carries a message. At the receiving end, the light beams are converted back into electric current, and decoded. Since light beams are immune to electrical noise and can be carried greater distances before fading, this technology is used heavily in telecommunications.

As the glass fiber comes out of the furnace, it has a highly polished pristine surface with a theoretical strength in the range of 12-20 Giga-Pascals (GPa). To preserve this high strength, polymeric coatings are applied immediately after the drawing. Usually two layers of acrylate coatings are applied to the cladded core: (1) a soft inner acrylate coating adjacent to the fiber to avoid microbending loss, and (2) a hard outer acrylate coating to resist abrasion. The coatings may be ultraviolet (UV) curable acrylates, UV-curable silicones, hot melts, heat-curable silicones or nylons. When dual coatings are applied, the coated fiber diameter is typically within a range of 235 – 250 microns.

Alcatel applies a dual acrylate coating called “AFC3,” and a color coating called “ColorLock,” during its optical fiber manufacturing process. You state that the thickness of Alcatel’s UV curable dual acrylate coatings and coloring is 60 microns thick in keeping with industry standards. The dual acrylate coating provides important fiber protection and structural integrity to the bare glass fibers, responsible for each fiber’s tensile strength, to the extent that the bare glass fibers could not be used without it. The application of dual acrylate coatings/sheathing provides significant protection against abrasion of the optic fibers, enhances tensile strength and reduces the effects of long-term stress, in particular exposure to humid environments which can lead to failure due to a phenomenon called “static fatigue.” After the individual fibers are manufactured (with their coatings) they are placed inside buffer tubes. Each cable also has a varied number of individual optical fibers grouped in a number of buffered tubes or similar coverings, including different types of insulation, which are all contained within a particular cable’s outermost layer or jacket. The finished optical fiber cable is then imported.

ISSUE:

Whether Alcatel’s optical fiber cables using AFC3 dual acrylate coatings and ColorLock process are classifiable under heading 8544, HTSUS, as “optical fiber cables, made up of individually sheathed fibers,” or under heading 9001, HTSUS, as “[o]ptical fibers and optical fiber bundles; optical fiber cables other than those of heading 8544; . . . [o]ptical fibers, optical fiber bundles and cables . . .”

LAW AND ANALYSIS:

Classification of merchandise under the HTSUS is in accordance with the General Rules of Interpretation (GRIs). Under GRI 1, HTSUS, goods are to be classified according to the terms of the headings and any relative section or chapter notes, and provided the headings or notes do not require otherwise, according to GRIs 2 through 6.

In understanding the language of the HTSUS, the Harmonized Commodity Description and Coding System Explanatory Notes may be utilized. The Explanatory Notes (ENs), although not dispositive or legally binding, provide a commentary on the scope of each heading of the HTSUS, and are generally indicative of the proper interpretation of these headings. Customs believes the ENs should always be consulted. See T.D. 98-80, 54 Fed. Reg. 35127, 35128 (Aug. 23, 1989).

The HTSUS provisions under consideration are as follows (emphasis added):

8544 Insulated (including enameled or anodized) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fiber cables, made up of individually sheathed fibers, whether or not assembled with electric conductors or fitted with connectors:

* * * * * * 9001 Optical fibers and optical fiber bundles; optical fiber cables other than those of heading 8544; sheets and plates of polarizing material; lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked:

( ( ( ( ( (

EN 85.44 states that the heading also covers:

“optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors. The sheaths are usually of different colours to permit identification of the fibres at both ends of the cable. Optical fibre cables are used mainly in telecommunications because their capacity for transmission of data is greater than that of electrical conductors.”

Heading 9001, HTSUS, covers inter alia, “optical fibers and optical fiber bundles: optical fiber cables other than those of heading 8544.” Section XVIII, Chapter 90, Note 1(h), states that “optical fiber cables of heading No. 85.44” are not covered in Chapter 90. Optical fiber cables composed of optic fibers that are not “individually sheathed” would be classifiable under heading 9001. Therefore, the issue to resolve is, whether the instant cables are individually sheathed.

The legal notes and heading texts, as well as the ENs, do not provide a definition of the term: “individually sheathed.” In the absence of such guidance, tariff terms may be construed in accordance with their common and commercial meanings. Nippon Kogasku (USA), Inc., v. United States, 69 CCPA 89, 673 F.2d 380 (1982). Common and commercial meaning may be determined by consulting dictionaries, lexicons, scientific authorities and other reliable resource materials. C.J. Tower & Sons v. United States, 69 CCPA 128, 673 F.2d 1268 (1982).

As a result of technological advances, optical fiber cables may not always be comprised of optical fibers that are covered with the traditional, thick, protective, removable plastic. However, the application of a thin primary inking or coating applied primarily for color-coding, would not constitute a “sheath” for purposes of heading 8544, HTSUS. A “buffered fiber” is the general term used in the optical fiber cable industry to describe “[a]n optical fiber that has a coating over the cladding for protection, increased visibility, and ease of handling.” Communications Standard Dictionary, 3rd Ed., p.98.

The strength of an optical fiber is of such fundamental importance that an optical fiber is subjected to a process called “proof testing.” This testing subjects an optical fiber to levels of controlled “proof stress” reflecting those stresses that it will encounter during manufacture, storage, installation, and service. As a result, an optical fiber’s strength can be quantified.

Alcatel states that each of the subject optical fibers is manufactured individually, with its dual-layer acrylate coating and coloring processes integrated into a single-step of production. Alcatel emphasizes that its optical fibers are individually produced, clad and coated. Alcatel has submitted that its “Singlemode optical fibers contained in the cables are made of individually coated (sheathed) fibers which are only color-coded for identification down the length of the fiber” but may also be without coloring.

Proof testing not only guarantees that an optic fiber possesses the strength to survive short-term stresses, but it also guarantees that a fiber will survive a lower residual stress that it may be subjected to during its long service life (sometimes as long as 40 years). Proof testing can be performed in-line immediately after the glass optic fiber core and cladding are drawn and coated, or off-line before the fiber is stored. Optic fibers that survive proof testing are those stored for further packaging into cables.

Alcatel’s process involves “polymerization of the resins and (UV) lamps to ‘cure’ the thin ink layer applied to the coating surface.” By using this “ColorLock technology” the fiber coloring and acrylate coatings are combined into a single step during the drawing process. This is distinguishable from the application of inking used solely or primarily to identify individual fibers. The optical fiber coating produces very high levels of geometric precision with a color that “is ‘locked’ into the fiber coating at over 5 times the depth of the thin surface layers applied by inking technologies.” Alcatel asserts industry standard specifications for coated, colored optic fibers are 250+/-15 microns, and claims that its AFC3/ ColorLock process exceeds this standard.

The amount of coating applied to its optical fiber is 60 microns thick and reflects “an industry standard.” Alcatel has established that its incorporation of AFC3 coating and ColorLock process protects the individual optical fibers from abrasions on the glass core and cladding that could cause short or long-term failures.

Insofar as the subject optical fiber is individually coated with 60 microns of protective dual acrylate, it is our opinion that optical fiber cable composed of this optical fiber and coated with this combination of 60 microns of dual acrylate coatings and “ColorLock” would be classifiable as “individually sheathed” under heading 8544, HTSUS. In this case, the optical fibers covered with AFC3 dual acrylate coatings and ColorLock, should be considered “individually sheathed” for the purposes of heading 8544. Alcatel’s 60 microns of dual acrylate coatings do substantially add to the overall protection, security, and reliability of each individual optical fiber and should be considered sheathing.

Heading 9001, HTSUS, provides for optical fibers and optical fiber bundles; optical fiber cables other than those of heading 8544. EN 90.01 states, that this heading covers inter alia, optical fibres and optical fibre bundles, as well as optical fibre cables other than those of heading 8544. Thus, if the subject optical fiber cables are classifiable at heading 8544, they would not be classifiable at heading 9001, HTSUS. EN 90.01(A) describes “Optical fibre cables” classifiable at this heading. They “consist of a sheath containing one or more optical fibre bundles, the fibres of which are not individually sheathed.” Insofar as we have determined that the optical fibers used in Alcatel’s optical fiber cables are, in fact, “individually sheathed,” they are not classifiable under heading 9001. EN 90.01(A) further states that, “Optical fibres” classifiable under heading 9001, consist of “concentric layers of glass or plastics of different refractive indices[.]” “[T]hose drawn from glass have a very thin coating of plastics, invisible to the naked eye, which renders the fibres less prone to fracture.” The AFC3 dual acrylate coating and “ColorLock” are clearly visible to the naked eye, and are not proportionately “very thin” with respect to the diameter of the optical fiber core and cladding. Moreover, fundamentally, the coating/sheathing protects the individual optical fiber more than by rendering it “less prone to fracture,” referenced in EN 90.01(A).

It is not our view that every coating, buffering, jacket, covering, or sheathing, merely, because it is called a “sheathing,” or has some of the qualities exhibited by Alcatel’s protective coating, affords an optical fiber sufficient protection for it to be classifiable under heading 8544, HTSUS, as “individually sheathed.” However, in this case, Alcatel has adequately demonstrated that its combination of 60 microns of dual acrylate coating and coloring does provide substantial sheathing protection to the individual optical fibers in its optical fiber cable. Therefore, at GRI 1, we find that the merchandise is classifiable under heading 8544, HTSUS. See HQ Rulings 962445, 962322, 963016, 963213, and 963256 of this date for similar rulings.

HOLDING:

The subject optical fiber cable is classifiable under subheading 8544.70.00, HTSUS, which provides for: “[i]nsulated (including enameled or anodized) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fiber cables, made up of individually sheathed fibers, whether or not assembled with electric conductors or fitted with connectors: Optical fiber cables.”


Sincerely,

John Durant, Director
Commercial Rulings Division