page 506    DR-CAFTA 
  6. A change to subheading 7315.19 from any other heading.

  7. (A) A change to subheadings 7315.20 through 7315.89 from any other heading; or

   (B) A change to subheadings 7315.20 through 7315.89 from subheading 7315.90, whether or not there is also a change from any other heading, provided there is a regional value content of not less than:

     (i) 35 percent when the build-up method is used, or

     (ii) 45 percent when the build-down method is used.

  8. A change to subheading 7315.90 from any other heading.

  9. A change to heading 7316 from any other heading, except from headings 7312 or 7315.

  10. A change to headings 7317 through 7318 from any heading outside that group.

  11. A change to headings 7319 through 7320 from any other heading.

  12. (A) A change to subheading 7321.11 from any other subheading, except cooking chambers, whether or not assembled, the upper panel, whether or not with controls or burners, or door assembly, which includes more than one of the following components: inside panel, external panel, window or insulation of subheading 7321.90; or

   (B) A change to subheading 7321.11 from subheading 7321.90, whether or not there is also a change from any other heading, provided there is a regional value content of not less than:

     (i) 35 percent when the build-up method is used, or

     (ii) 45 percent when the build-down method is used.

  13. (A) A change to subheadings 7321.12 through 7321.89 from any other heading; or

   (B) A change to subheadings 7321.12 through 7321.89 from subheading 7321.90, whether or not there is also a change from any other heading, provided there is a regional value content of not less than:

     (i) 35 percent when the build-up method is used, or

     (ii) 45 percent when the build-down method is used.

  14. (A) A change to subheading 7321.90 from any other heading, or

   (B) No change in tariff classification is required, provided there is regional value content of not less than:

     (i) 35 percent when the build-up method is used, or

     (ii) 45 percent when the build-down method is used.

  15. A change to headings 7322 through 7323 from any heading outside that group.

  16. (A) A change to subheadings 7324.10 through 7324.29 from any other heading; or

   (B) No change in tariff classification is required, provided that there is a regional value content of not less than:

     (i) 35 percent when the build-up method is used, or

     (ii) 45 percent when the build-down method is used.
page 507    DR-CAFTA 
17. A change to subheading 7324.90 from any other heading.

18. A change to subheadings 7325.10 through 7326.20 from any subheading outside that group.

19. A change to subheading 7326.90 from any other heading, except from heading 7325.

Chapter 74.

1. A change to headings 7401 through 7403 from any other heading.

2. No change in tariff classification is required for heading 7404, provided there is regional value content of not less than:

  (A) 35 percent when the build-up method is used, or

  (B) 45 percent when the build-down method is used.

3. A change to headings 7405 through 7407 from any other heading.

4. A change to heading 7408 from any other heading, except from heading 7407.

5. A change to heading 7409 from any other heading.

6. A change to heading 7410 from any other heading, except from plate, sheet or strip classified in heading 7409 of a thickness less than 5 mm.

7. A change to headings 7411 through 7419 from any other heading.

Chapter 75.

1. A change to headings 7501 through 7505 from any other heading.

2. (A) A change to heading 7506 from any other heading; or

  (B) A change to foil, not exceeding 0.15 mm in thickness, from any other good of heading 7506, provided that there has been a reduction in thickness of no less than 50 percent.

3. A change to subheadings 7507.11 through 7508.90 from any other subheading.

Chapter 76.

1. A change to heading 7601 from any other chapter.

2. A change to heading 7602 from any other heading.

3. A change to heading 7603 from any other chapter.

4. A change to heading 7604 from any other heading, except from headings 7605 through 7606.

5. A change to heading 7605 from any other heading, except from heading 7604.

6. A change to subheading 7606.11 from any other heading.

7. A change to subheading 7606.12 from any other heading, except from headings 7604 through 7605.

8. A change to subheading 7606.91 from any other heading.

9. A change to subheading 7606.92 from any other heading, except from headings 7604 through 7605.
page 508    DR-CAFTA 
  10. A change to subheading 7607.11 from any other heading.

  11. (A) A change to subheadings 7607.19 through 7607.20 from any other heading; or

   (B) No change in tariff classification is required, provided that there is a regional value content of not less than:

     (i) 30 percent when the build-up method is used, or

     (ii) 35 percent when the build-down method is used.

  12. A change to headings 7608 through 7609 from any other heading outside that group.

  13. A change to headings 7610 through 7613 from any other heading.

  14. A change to subheading 7614 from any other heading.

  15. A change to heading 7615 from any other heading.

  16. A change to subheading 7616.10 from any other heading.

  17. A change to subheadings 7616.91 through 7616.99 from any other subheading.

  Chapter 78.

  1. A change to headings 7801 through 7802 from any other chapter.

  2. A change to heading 7804 from any other heading.

  3. (A) A change to lead bars, rods, profiles and wire of heading 7806 from any other good of heading 7806 or any other heading; or

   (B) A change to lead tubes or pipes of heading 7806 and fittings for tubes or pipes (for example, couplings, elbows, sleeves) of heading 7806 from any other good of heading 7806 or from any other heading; or

   (C) A change to any other good of heading 7806 from lead bars, rods, profiles, wire and pipes of heading 7806; or from fittings for tubes or pipes (for example, couplings, elbows, sleeves) of heading 7806 or any other heading.

  Chapter 79.

  1. A change to headings 7901 through 7902 from any other chapter.

  2. A change to subheading 7903.10 from any other chapter.

  3. A change to subheading 7903.90 from any other heading.

  4. A change to headings 7904 through 7905 from any other heading.

  5. (A) A change to zinc tubes of heading 7907; or pipes and fittings for tubes or pipes (for example, couplings, elbows, sleeves) of heading 7907, from any other good of heading 7907 or from any other heading; or

   (B) A change to any other good of heading 7907 from zinc tubes or pipes of heading 7907; or fittings for tubes or pipes (for example, couplings, elbows, sleeves) of heading 7907 or any other heading.

  Chapter 80.

  1. A change to headings 8001 through 8002 from any other chapter.

  2. A change to heading 8003 from any other heading.
page 509    DR-CAFTA 
3. (A) A change to heading 8007 from any other heading; or

  (B) A change to plates, sheets and strip, of a thickness exceeding 0.2mm, of heading 8007 from any other good of heading    8007; or

  (C) A change to tin foil and strip, thin, (printed or even fixed on paper, cardboard, plastic or similar supports), of thickness not exceeding 0.2 mm (without including the support); or to tin powders and flakes of heading 8007 from any other good of heading 8007, except from plates, sheets and strip, of a thickness exceeding 0.2mm, of heading 8007; or

  (D) A change to tin tubes or pipes and fittings for tubes and pipes (for example, couplings, elbows, sleeves) of heading 8007 from any other good of heading 8007.

4. [Rule deleted.]

Chapter 81.

1. A change to subheadings 8101.10 through 8101.94 from any other chapter.

2. A change to subheading 8101.96 from any other subheading, except from bars, rods, profiles, plates, sheets and strip, of subheading 8101.99.

3. [Rule deleted.]

4. A change to subheading 8101.97 from any other chapter.

5. (A) A change to bars or rods (other than those obtained simply by sintering), profiles, plates, sheets, strip or foil of subheading   8101.99 from any other good of subheading 8101.99 or any other subheading; or

  (B) A change to any other good of subheading 8109.99 from bars or rods (other than those obtained simply by sintering), profiles, plates, sheets, strip or foil of subheading 8101.99 or any other subheading.

6. A change to subheading 8102.10 through 8102.94 from any other chapter.

7. A change to subheading 8102.95 from any other subheading.

8. A change to subheading 8102.96 from any other subheading, except from subheading 8102.95.

9. A change to subheading 8102.97 from any other chapter.

10. A change to subheading 8102.99 from any other subheading.

11. A change to subheading 8103.20 from any other chapter.

12. A change to subheading 8103.30 from any other chapter.

13. A change to subheading 8103.90 from any other subheading.

14. A change to subheadings 8104.11 through 8104.20 from any other chapter.

15. A change to subheadings 8104.30 through 8104.90 from any other subheading.

16. A change to subheading 8105.20 from any other chapter.

17. A change to subheading 8105.30 from any other chapter.

18. A change to subheading 8105.90 from any other subheading.
page 510    DR-CAFTA 
  19. (A) A change to heading 8106 from any other chapter, or

   (B) No change in tariff classification is required, provided that there is a regional value content of not less than:

    (i) 35 percent when the build-up method is used, or

    (ii) 45 percent when the build-down method is used.

  20. A change to subheading 8107.20 from any other chapter.

  21. A change to subheading 8107.30 from any other chapter.

  22. A change to subheading 8107.90 from any other subheading.

  23. A change to subheading 8108.20 from any other chapter.

  24. A change to subheading 8108.30 from any other chapter.

  25. A change to subheading 8108.90 from any other subheading.

  26. A change to subheading 8109.20 from any other chapter.

  27. A change to subheading 8109.30 from any other chapter.

  28. A change to subheading 8109.90 from any other subheading.

  29. (A) A change to heading 8110 from any other chapter, or

   (B) No change in tariff classification is required, provided that there is a regional value content of not less than:

    (i) 35 percent when the build-up method is used, or

    (ii) 45 percent when the build-down method is used.

  30. (A) A change to heading 8111 from any other chapter, or

   (B) No change in tariff classification is required, provided that there is a regional value content of not less than:

    (i) 35 percent when the build-up method is used, or

    (ii) 45 percent when the build-down method is used.

  31. A change to subheading 8112.12 from any other chapter.

  32. A change to subheading 8112.13 from any other chapter.

  33. A change to subheading 8112.19 from any other subheading, provided that there is a regional value content of not less than:

   (A) 35 percent when the build-up method is used, or

   (B) 45 percent when the build-down method is used.

  34. (A) A change to subheadings 8112.21 through 8112.59 from any other chapter; or

   (B) No change in tariff classification is required, provided that there is a regional value content of not less than:

    (i) 35 percent when the build-up method is used, or
© 2014 CustomsMobile | Disclaimer | Privacy | About