page 416    Australia 
     (D) fabrics of subheading 5208.22 or 5208.32, not of square construction, containing more than 75 warp ends and filling picks per square centimeter, of average yarn number exceeding 65 metric;

     (E) fabrics of subheading 5407.81, 5407.82 or 5407.83, weighing less than 170 grams per square meter, having a dobby weave created by a dobby attachment;

     (F) fabrics of subheading 5208.42 or 5208.49, not of square construction, containing more than 85 warp ends and filling picks per square centimeter, of average yarn number exceeding 85 metric;

     (G) fabrics of subheading 5208.51, of square construction, containing more than 75 warp ends and filling picks per square centimeter, made with single yarns, of average yarn number 95 or greater metric;

     (H) fabrics of subheading 5208.41, of square construction, with a gingham pattern, containing more than 85 warp ends and filling picks per square centimeter, made with single yarns, of average yarn number 95 or greater metric, and characterized by a check effect produced by the variation in color of the yarns in the warp and filling; or

     (I) fabrics of subheading 5208.41, with the warp colored with vegetable dyes, and the filling yarns white or colored with vegetable dyes, of average yarn number greater than 65 metric.

   30. A change to subheadings 6205.20 through 6205.30 from any other chapter, except from headings 5106 through 5113, 5204 through 5212, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or     6001 through 6006, provided that the good is both cut and sewn or otherwise assembled in the territory of Australia or of the     United States, or both.

   31. A change to subheading 6205.90 from any other chapter, except from headings 5106 through 5113, 5204 through 5212, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or 6001 through 6006, provided that the good is both cut and sewn or otherwise assembled in the territory of Australia or of the United States, or both.

   32. A change to headings 6206 through 6210 from any other chapter, except from headings 5106 through 5113, 5204 through     5212, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or 6001 through 6006, provided that the good is both cut and sewn or otherwise assembled in the territory of Australia or of the United     States, or both.

   33. A change to subheadings 6211.11 through 6211.12 from any other chapter, except from headings 5106 through 5113, 5204 through 5212, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or     6001 through 6006, provided that the good is both cut and sewn or otherwise assembled in the territory of Australia or of the     United States, or both.

   34. A change to subheading 6211.20 from any other chapter, except from headings 5106 through 5113, 5204 through 5212, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or 6001 through 6006, provided that:

     (A) the good is both cut and sewn or otherwise assembled in the territory of Australia or of the United States, or both; and

     (B) with respect to a garment described in headings 6101, 6102, 6201 or 6202, of wool, fine animal hair, cotton or man-made fibers, that is imported as part of a ski-suit of this subheading, any visible lining material contained in the apparel article must satisfy the requirements of chapter rule 1 for chapter 62.

   35. A change to subheadings 6211.32 through 6211.49 from any other chapter, except from headings 5106 through 5113, 5204 through 5212, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or     6001 through 6006, provided that the good is both cut and sewn or otherwise assembled in the territory of one or both of the parties.
page 417    Australia 
36. A change to subheading 6212.10 from any other chapter, provided that the good is both cut and sewn or otherwise assembled in the territory of Australia or of the United States, or both; and provided that, during each annual period, such goods of a producer or an entity controlling production shall be eligible for preferential treatment under this note only if the aggregate cost of fabric(s) (exclusive of findings and trimmings) formed in the territory of Australia or of the United States, or both, that is used in the production of all such articles of that producer or entity during the preceding annual period is at least 75 percent of the aggregate declared customs value of the fabric (exclusive of findings and trimmings) contained in all such goods of that producer or entity that are entered during the preceding one year period.

37. A change to subheadings 6212.20 through 6212.90 from any other chapter, except from headings 5106 through 5113, 5204 through 5212, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or  6001 through 6006, provided that the good is both cut and sewn or otherwise assembled in the territory of Australia or of the  United States, or both.

38. A change to headings 6213 through 6217 from any other chapter, except from headings 5106 through 5113, 5204 through  5212, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or 6001 through 6006, provided that the good is both cut and sewn or otherwise assembled in the territory of Australia or of the United  States, or both.

Chapter 63.

Chapter rule 1: For the purposes of determining the origin of a good of this chapter, the rule applicable to that good shall only apply to the component that determines the tariff classification of the good, and such component must satisfy the tariff change requirements set out in the rule for that good.

1. A change to subheading 6301.20 from subheadings 5108.10.40 or 5108.20.40 or from any other chapter, except from headings   5106 through 5113, 5204 through 5212, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516,   5801 through 5802 or 6001 through 6006, provided that the good is both cut (or knit to shape) and sewn or otherwise assembled in the territory of Australia or of the United States, or both.

2. A change to heading 6301 from any other chapter, except from headings 5106 through 5113, 5204 through 5212, 5307 through   5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or 6001 through 6006, provided that the good is both cut (or knit to shape) and sewn or otherwise assembled in the territory of Australia or of the United States, or both.

3. A change to heading 6302 from any other chapter, except from headings 5106 through 5113, 5204 through 5212, 5307 through   5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or 6001 through 6006, provided that the good is both cut (or knit to shape) and sewn or otherwise assembled in the territory of Australia or of the United States, or both.

4. A change to tariff item 6303.92.10 from tariff items 5402.43.10 or 5402.52.10 or any other chapter, except from headings 5106 through 5113, 5204 through 52.12, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516,   5801 through 5802 or 6001 through 6006, provided that the good is both cut and sewn or otherwise assembled in the territory of Australia or of the United States, or both.

5. A change to heading 6303 from any other chapter, except from headings 5106 through 5113, 5204 through 5212, 5307 through   5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or 6001 through 6006, provided that the good is both cut (or knit to shape) and sewn or otherwise assembled in the territory of Australia or of the United States, or both.

6. A change to headings 6304 through 6308 from any other chapter, except from headings 5106 through 5113, 5204 through   5212, 5307 through 5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or 6001 through 6006, provided that the good is both cut (or knit to shape) and sewn or otherwise assembled in the territory of Australia or of the United States, or both.

7. A change to heading 6309 from any other heading.
page 418    Australia 
   8. A change to heading 6310 from any other chapter, except from headings 5106 through 5113, 5204 through 5212, 5307 through      5308 or 5310 through 5311, chapter 54 or headings 5508 through 5516, 5801 through 5802 or 6001 through 6006, provided that the good is both cut (or knit to shape) and sewn or otherwise assembled in the territory of Australia or of the United States, or both.

   Chapter 64.

   1. A change to subheading 6401.10 from any other heading outside headings 6401 through 6405, except from subheading      6406.10, provided that there is a regional value content of not less than 55 percent based on the build-down method.

   2. (A) A change to ski-boots and snowboard boots of subheading 6401.92 from any heading outside headings 6401 through       6405, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method;

     (B) A change to footwear, other than ski-boots and snowboard boots, having soles and uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to chapter       64) is polyvinyl chloride, whether or not supported or lined with polyvinyl chloride but not otherwise supported or lined, of subheading 6401.92 from any heading outside headings 6401 through 6405, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method;

     (C) A change to any other footwear of subheading 6401.92 from any heading outside headings 6401 through 6405, except from subheading 6406.10, provided that there is a regional value content of not less than 55 percent based on the build-down method.

   3. [Rule deleted.]

   4. (A) A change to footwear of subheading 6401.99 designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather from any heading outside headings 6401 through 6405, except from subheading 6406.10, provided that there is a regional value content of not less than 55 percent based on the build-down method;

     (B) A change to footwear of subheading 6401.99, other than footwear designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather, having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to chapter 64 of the tariff schedule) is rubber or plastic (except footwear having foxing or foxing-like band applied or molded at the sole and overlapping the upper) of subheading 6401.99 from any heading outside headings 6401 through       6405, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method; or

     (C) A change to any other footwear of subheading 6401.99 from any heading outside headings 6401 through 6405, except from subheading 6406.10, provided that there is a regional value content of not less than 55 percent based on the build-down method.

   5. A change to subheadings 6402.12 through 6402.20 from any heading outside heading 6401 through 6405, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method.

   6. (A) A change to footwear incorporating a protective metal toe-cap, having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is rubber or plastics (except such footwear having foxing or a foxing-like band applied or molded at the sole and overlapping the upper and except such footwear designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather) of subheading 6402.91 from any heading outside headings 6401 through 6405, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method; or

     (B) A change to footwear incorporating a protective metal toe-cap, designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather of subheading 6402.91 from any heading outside headings 6401 through 6405, except from subheading 6406.10, provided that there is a regional value content of not less than 55 percent based on the build-down method; or
page 419    Australia 
  (C) A change to any other footwear of subheading 6402.91 valued not over $3/pair, from any other heading outside headings    6401 through 6405, provided there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method; or

  (D) A change to any other footwear of subheading 6402.91 valued over $3/pair but not over $12/pair, from any other heading outside headings 6401 through 6405, except from subheading 6406.10, provided there is a regional value content of not less than 55 percent based on the build-down method; or

  (E) A change to any other footwear of subheading 6402.91, valued over $12/pair, from any other heading outside headings    6401 through 6405, provided there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method.

7. (A) A change to footwear having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is rubber or plastics except (1) footwear having a foxing or foxing-like band applied or molded at the sole and overlapping the upper and (2) except footwear (other than footwear having uppers which from a point 3 cm above the top of the outer sole are entirely of non-molded construction formed by sewing the parts together and having exposed on the outer surface a substantial portion of the functional stitching) designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather of subheading 6402.91 from any heading outside headings 6401 through 6405, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method; or

  (B) A change to footwear designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather of subheading 6402.91, from any heading outside headings 6401 through 6405, except from subheading 6406.10, provided there is a regional value content of not less than 55 percent based on the build-down method; or

  (C) A change to other footwear of subheading 6402.91, valued not over $6.50/pair, from any heading outside headings 6401 through 6405, provided there is a regional value content of not less than 35 percent based on the build-up method and    45 percent based on the build-down method; or

  (D) A change to other footwear of subheading 6402.91, valued over $6.50/pair, from any heading outside headings 6401 through 6405, except from subheading 6406.10, provided there is a regional value content of not less than 55 percent based on the build-down method.

8. (A) A change to footwear incorporating a protective metal toe-cap, having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is rubber or plastics (except footwear having foxing or a foxing-like band applied or molded at the sole and overlapping the upper and except footwear designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather) of subheading 6402.99 from any heading outside headings 6401 through 6405, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method; or

  (B) A change to footwear incorporating a protective metal toe-cap, designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather of subheading 6402.99 from any heading outside headings 6401 through 6405, except from subheading 6406.10, provided that there is a regional value content of not less than 55 percent based on the build-down method; or

  (C) A change to any other footwear of subheading 6402.99 valued not over $3/pair, from any other heading outside headings    6401 through 6405, provided there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method; or

  (D) A change to any other footwear of subheading 6402.99 valued over $3/pair but not over $12/pair, from any other heading outside headings 6401 through 6405, except from subheading 6406.10, provided there is a regional value content of not less than 55 percent based on the build-down method; or

  (E) A change to any other footwear of subheading 6402.99, valued over $12/pair, from any other heading outside headings    6401 through 6405, provided there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method.
page 420    Australia 
   8A. (A) A change to other footwear having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is rubber or plastics (except footwear having a foxing or foxing-like band applied or molded at the sole and overlapping the upper and except footwear designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather) of subheading 6402.99 from any heading outside headings 6401 through 6405, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based onthe build-down method; or

     (B) A change to other footwear designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather of subheading 6402.99 from any heading outside headings 6401 through 6405, except subheading 6406.10, provided that there is a regional value content of not less than 55 percent based on the build-down method; or

     (C) A change to other footwear with open toes or open heels; footwear of the slip-on type, that is held to the foot without the use of laces or buckles or other fasteners (except footwear designed to be worn over,or in lieu of, other footwear as protection against water, grease, or chemicals or cold or inclement weather and except footwear having a foxing-like band wholly or almost wholly of rubber or plastics applied or molded at the sole and overlapping the upper) of subheading       6402.99 from any heading outside headings 6401 through 6405, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method; or

     (D) A change to other footwear of subheading 6402.99 valued not over $6.50/pair, from any heading outside headings 6401 through 6405, provided there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method; or

     (E) A change to other footwear of subheading 6402.99 valued over $6.50/pair, from any heading outside headings 6401 through 6405, except from subheading 6406.10, provided there is a regional value content of not less than 55 percent based on the build-down method.

   9. A change to heading 6403 from any other heading outside heading 6401 through 6405, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method.

   10. (A) A change to footwear of subheading 6404.11 having uppers of which over 50 percent of the external surface area (including any leather accessories or reinforcements such as those mentioned in note 4(a) to chapter 64 of the tariff schedule) is leather from any heading, provided there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method;

     (B) A change to other footwear of subheading 6404.11 valued not over $12/pair, from any heading, provided there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method; or

     (C) A change to other footwear of subheading 6404.11 valued over $12/pair from any heading, except from subheading       6406.10, provided that there is a regional value content of not less than 55 percent based on the build-down method.

   11. (A) A change to footwear of subheading 6404.19 having uppers of which over 50 percent of the external surface area (including any leather accessories or reinforcements such as those mentioned in note 4(a) to chapter 64 of the tariff schedule) is leather from any heading, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method;

     (B) A change to footwear of subheading 6404.19 designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather from any heading, except from subheading 6406.10, provided that there is a regional value content of not less than 55 percent based on the build-down method; or

     (C) A change to any other footwear of subheading 6404.19 from any heading, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method.

   12. A change to subheading 6404.20 from any other heading, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method.

   13. A change to heading 6405 from any other heading, provided that there is a regional value content of not less than 35 percent based on the build-up method or 45 percent based on the build-down method.
© 2014 CustomsMobile | Disclaimer | Privacy | About