AD/CVD message 1288209 - NOTICE OF FINAL DETERMINATION IN THE ANTIDUMPING DUTY INVESTIGATION OF CERTAIN HOT-ROLLED CARBON STEEL FLAT PRODUCTS FROM INDONESIA (A-560-812)

1288209
Oct 15, 2001
Active

Category: Antidumping • Type: Final Determination And Order • Cases: A-560-812

MESSAGE NO: 1288209 DATE: 10 15 2001
CATEGORY: ADA TYPE: FNO
REFERENCE: REFERENCE DATE:
CASES: A - 560 - 812 - -
- - - -
- - - -

PERIOD COVERED: 09 28 2001 TO

LIQ SUSPENSION DATE:

TO: DIRECTORS OF FIELD OPERATIONS
PORT DIRECTORS

FROM: DIRECTOR, TRADE ENFORCEMENT & CONTROL

RE: NOTICE OF FINAL DETERMINATION IN THE ANTIDUMPING DUTY
INVESTIGATION OF CERTAIN HOT-ROLLED CARBON STEEL FLAT
PRODUCTS FROM INDONESIA (A-560-812)

1. ON 09/28/2001, THE DEPARTMENT OF COMMERCE WILL PUBLISH IN THE
FEDERAL REGISTER ITS FINAL DETERMINATION OF SALES AT LESS THAN
FAIR VALUE IN THE ANTIDUMPING DUTY INVESTIGATION OF CERTAIN HOT-
ROLLED CARBON STEEL FLAT PRODUCTS FROM INDONESIA.

2. SCOPE LANGUAGE. FOR PURPOSES OF THIS INVESTIGATION, THE
PRODUCTS COVERED ARE CERTAIN HOT-ROLLED CARBON STEEL FLAT
PRODUCTS OF A RECTANGULAR SHAPE, OF A WIDTH OF 0.5 INCH OR
GREATER, NEITHER CLAD, PLATED, NOR COATED WITH METAL AND WHETHER
OR NOT PAINTED, VARNISHED, OR COATED WITH PLASTICS OR OTHER NON-
METALLIC SUBSTANCES, IN COILS (WHETHER OR NOT IN SUCCESSIVELY
SUPERIMPOSED LAYERS), REGARDLESS OF THICKNESS, AND IN STRAIGHT
LENGTHS OF A THICKNESS OF LESS THAN 4.75 MM AND OF A WIDTH
MEASURING AT LEAST 10 TIMES THE THICKNESS. UNIVERSAL MILL PLATE
(I.E., FLAT-ROLLED PRODUCTS ROLLED ON FOUR FACES OR IN A CLOSED
BOX PASS, OF A WIDTH EXCEEDING 150 MM, BUT NOT EXCEEDING 1250 MM,
AND OF A THICKNESS OF NOT LESS THAN 4.0 MM, NOT IN COILS AND
WITHOUT PATTERNS IN RELIEF) OF A THICKNESS NOT LESS THAN 4.0 MM
IS NOT INCLUDED WITHIN THE SCOPE OF THIS INVESTIGATION.

SPECIFICALLY INCLUDED WITHIN THE SCOPE OF THIS INVESTIGATION ARE
VACUUM DEGASSED, FULLY STABILIZED (COMMONLY REFERRED TO AS
INTERSTITIAL-FREE (IF)) STEELS, HIGH STRENGTH LOW ALLOY (HSLA)
STEELS, AND THE SUBSTRATE FOR MOTOR LAMINATION STEELS. IF STEELS
ARE RECOGNIZED AS LOW CARBON STEELS WITH MICRO-ALLOYING LEVELS OF
ELEMENTS SUCH AS TITANIUM OR NIOBIUM (ALSO COMMONLY REFERRED TO
AS COLUMBIUM), OR BOTH, ADDED TO STABILIZE CARBON AND NITROGEN
ELEMENTS. HSLA STEELS ARE RECOGNIZED AS STEELS WITH MICRO-
ALLOYING LEVELS OF ELEMENTS SUCH AS CHROMIUM, COPPER, NIOBIUM,
VANADIUM, AND MOLYBDENUM. THE SUBSTRATE FOR MOTOR LAMINATION
STEELS CONTAINS MICRO-ALLOYING LEVELS OF ELEMENTS SUCH AS SILICON
AND ALUMINUM.

STEEL PRODUCTS TO BE INCLUDED IN THE SCOPE OF THIS INVESTIGATION,
REGARDLESS OF DEFINITIONS IN THE HARMONIZED TARIFF SCHEDULE OF
THE UNITED STATES (HTSUS), ARE PRODUCTS IN WHICH:

I) IRON PREDOMINATES, BY WEIGHT, OVER EACH OF THE OTHER CONTAINED
ELEMENTS;

II) THE CARBON CONTENT IS 2 PERCENT OR LESS, BY WEIGHT; AND

III) NONE OF THE ELEMENTS LISTED BELOW EXCEEDS THE QUANTITY, BY
WEIGHT, RESPECTIVELY INDICATED:

1.80 PERCENT OF MANGANESE, OR
2.25 PERCENT OF SILICON, OR
1.00 PERCENT OF COPPER, OR
0.50 PERCENT OF ALUMINUM, OR
1.25 PERCENT OF CHROMIUM, OR
0.30 PERCENT OF COBALT, OR
0.40 PERCENT OF LEAD, OR
1.25 PERCENT OF NICKEL, OR
0.30 PERCENT OF TUNGSTEN, OR
0.10 PERCENT OF MOLYBDENUM, OR
0.10 PERCENT OF NIOBIUM, OR
0.15 PERCENT OF VANADIUM, OR
0.15 PERCENT OF ZIRCONIUM.

ALL PRODUCTS THAT MEET THE PHYSICAL AND CHEMICAL DESCRIPTION
PROVIDED ABOVE ARE WITHIN THE SCOPE OF THIS INVESTIGATION UNLESS
OTHERWISE EXCLUDED. THE FOLLOWING PRODUCTS, BY WAY OF EXAMPLE,
ARE OUTSIDE OR SPECIFICALLY EXCLUDED FROM THE SCOPE OF THIS
INVESTIGATION:

ALLOY HOT-ROLLED STEEL PRODUCTS IN WHICH AT LEAST ONE OF THE
CHEMICAL ELEMENTS EXCEEDS THOSE LISTED ABOVE (INCLUDING, E.G.,
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SPECIFICATIONS
A543, A387, A514, A517, A506).

SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)/AMERICAN IRON & STEEL
INSTITUTE (AISI) GRADES OF SERIES 2300 AND HIGHER.

BALL BEARING STEELS, AS DEFINED IN THE HTSUS.

TOOL STEELS, AS DEFINED IN THE HTSUS.

SILICO-MANGANESE (AS DEFINED IN THE HTSUS) OR SILICON ELECTRICAL
STEEL WITH A SILICON LEVEL EXCEEDING 2.25 PERCENT.

ASTM SPECIFICATIONS A710 AND A736.

USS ABRASION-RESISTANT STEELS (USS AR 400, USS AR 500).
ALL PRODUCTS (PROPRIETARY OR OTHERWISE) BASED ON AN ALLOY ASTM
SPECIFICATION (SAMPLE SPECIFICATIONS: ASTM A506, A507).

NON-RECTANGULAR SHAPES, NOT IN COILS, WHICH ARE THE RESULT OF
HAVING BEEN PROCESSED BY CUTTING OR STAMPING AND WHICH HAVE
ASSUMED THE CHARACTER OF ARTICLES OR PRODUCTS CLASSIFIED OUTSIDE
CHAPTER 72 OF THE HTSUS.

THE MERCHANDISE SUBJECT TO THESE INVESTIGATIONS IS CLASSIFIED IN
THE HTSUS UNDER THE FOLLOWING TARIFF CLASSIFICATION NUMBERS:
7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00,
7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30,
7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30,
7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90,
7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30,
7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00,
7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00,
7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, AND
7211.19.75.90.

CERTAIN HOT-ROLLED CARBON STEEL FLAT PRODUCTS COVERED BY THIS
INVESTIGATION, INCLUDING VACUUM DEGASSED FULLY STABILIZED; HIGH
STRENGTH LOW ALLOY; AND THE SUBSTRATE FOR MOTOR LAMINATION STEEL
MAY ALSO ENTER UNDER THE FOLLOWING TARIFF CLASSIFICATION NUMBERS:
7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00,
7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30,
7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00,
7226.91.70.00, 7226.91.80.00, AND 7226.99.00.00.

SUBJECT MERCHANDISE MAY ALSO ENTER UNDER:
7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00,
7212.40.50.00, AND 7212.50.00.00.

ALTHOUGH THE HTSUS TARIFF CLASSIFICATION NUMBERS ARE PROVIDED FOR
CONVENIENCE AND U.S. CUSTOMS SERVICE (CUSTOMS) PURPOSES, THE
WRITTEN DESCRIPTION OF THE MERCHANDISE UNDER INVESTIGATION IS
DISPOSITIVE.

3. FOR FURTHER REPORTING PURPOSES THIS CASE HAS BEEN ASSIGNED
INVESTIGATION NUMBER: A-560-812.

4. FOR IMPORTS OF CERTAIN HOT-ROLLED CARBON STEEL FLAT PRODUCTS
FROM INDONESIA, THE CUSTOMS SERVICE SHALL CONTINUE TO SUSPEND
LIQUIDATIONS OF SUCH SHIPMENTS ENTERED OR WITHDRAWN FROM
WAREHOUSE, FOR CONSUMPTION ON OR AFTER 05/03/2001, THE DATE OF
PUBLICATION OF THE PRELIMINARY DETERMINATION. EFFECTIVE
09/28/2001 CUSTOMS SHALL REQUIRE FOR ENTRIES A CASH DEPOSIT OR
THE POSTING OF A BOND EQUAL TO THE MARGINS SHOWN BELOW:

MFR/PRODUCER/ CUSTOMS ID MARGIN
EXPORTER NUMBER PERCENTAGE

PT KRAKATAU STEEL CORP. A-560-812-001 47.86
ALL OTHERS A-560-812-000 47.86
5. IF THERE ARE ANY QUESTIONS REGARDING THIS MATTER BY CUSTOMS
OFFICERS, PLEASE CONTACT VIA E-MAIL, THROUGH THE APPROPRIATE
SUPERVISORY CHANNELS, OTHER GOVERNMENT AGENCY LIAISON, USING THE
ATTRIBUTE "HQ OAB." THE IMPORTING PUBLIC AND OTHER INTERESTED
PARTIES SHOULD CONTACT MARK MANNING, OFFICE OF AD/CVD
ENFORCEMENT, IMPORT ADMINISTRATION, INTERNATIONAL TRADE
ADMINISTRATION, U.S. DEPARTMENT OF COMMERCE, AT (202) 482-5253.

6. THERE ARE NO RESTRICTIONS ON THE RELEASE OF THIS INFORMATION.

PAUL SCHWARTZ